MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Features Applications ■ U.L. Recognized (File #E90700, Volume 2) ■ Interfacing and coupling systems of different ■ VDE Recognized (File #13616) (add option “V” for ■ ■ ■ ■ ■ ■ potentials and impedances VDE approval, i.e, MOCD223V-M) Convenient Plastic SOIC-8 Surface Mountable Package Style High Current Transfer Ratio of 500% Minimum at IF = 1mA Minimum BVCEO of 30 Volts Guaranteed Standard SOIC-8 Footprint, with 0.050" Lead Spacing Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering High Input-Output Isolation Voltage of 2500 VAC(rms) Guaranteed LED 1 ANODE 1 LED 1 CATHODE 2 LED 2 ANODE 3 LED 2 CATHODE 4 ©2003 Fairchild Semiconductor Corporation MOCD223-M Rev. 1.0.0 ■ General purpose switching circuits ■ Monitor and detection circuits Description The MOCD223-M consist of two gallium arsenide infrared emitting diodes optically coupled to two monolithic silicon phototransistor darlington detectors, in a surface mountable, small outline plastic package. It is ideally suited for high density applications that require low input current and eliminates the need for through-the-board mounting. 8 COLLECTOR 1 7 EMITTER 1 6 COLLECTOR 2 5 EMITTER 2 1 www.fairchildsemi.com MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers October 2006 Symbol Rating Value Unit Forward Current – Continuous 60 mA Forward Current – Peak (PW = 100µs,120pps) 1.0 A VR Reverse Voltage 6.0 V PD LED Power Dissipation @ TA = 25°C Derate above 25°C 90 0.8 mW mW/°C EMITTER IF IF (pk) DETECTOR VCEO Collector-Emitter Voltage 30 V VCBO Collector-Base Voltage 70 V VECO Emitter-Collector Voltage 7.0 V IC Collector Current-Continuous 150 mA PD Detector Power Dissipation @ TA = 25°C Derate above 25°C 150 1.76 mW mW/°C Input-Output Isolation Voltage(1,2,3) (f = 60Hz, t = 1 min. Duration) 2500 Vac(rms) PD Total Device Power Dissipation @ TA = 25°C Derate above 25°C 250 2.94 mW mW/°C TA Ambient Operating Temperature Range -40 to +100 °C Storage Temperature Range -40 to +150 °C 260 °C TOTAL DEVICE VISO Tstg TL Lead Soldering Temperature (1/16" from case, 10 sec. duration) 2 MOCD223-M Rev. 1.0.0 www.fairchildsemi.com MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Absolute Maximum Ratings (TA = 25°C Unless otherwise specified) Symbol Parameter Test Conditions Min. Typ.* Max. Unit EMITTER VF Input Forward Voltage IF = 1.0mA 1.25 1.3 V IR Reverse Leakage Current VR = 6.0V 0.001 100 µA CIN Capacitance 18 pF DETECTOR ICEO1 Collector-Emitter Dark Current ICEO2 VCE = 5.0V, TA = 25°C 1.0 VCE = 5.0V, TA = 100°C 1.0 50 nA µA BVCEO Collector-Emitter Breakdown Voltage IC = 100µA 30 90 V BVECO Emitter-Collector Breakdown Voltage IE = 100µA 7.0 10 V CCE Collector-Emitter Capacitance f = 1.0MHz, VCE = 0 5.5 pF CTR Collector-Output Current(4) IF = 1.0mA, VCE = 5V 1000 % VCE (sat) Collector-Emitter Saturation Voltage IC = 500µA, IF = 1.0mA ton Turn-On Time IF = 5.0mA, VCC = 10V, RL = 100Ω (Fig 6.) 8 µs toff Turn-Off Time IF = 5.0mA, VCC = 10V, RL = 100Ω (Fig 6.) 55 µs tr Rise Time IF = 5.0mA, VCC = 10V, RL = 100Ω (Fig 6.) 6 µs tf Fall Time IF = 5.0mA, VCC = 10V, RL = 100Ω (Fig 6.) 45 µs Isolation Surge Voltage(1,2,3) f = 60Hz, t = 1 min. 2500 VI-O = 500V 1011 COUPLED VISO Resistance(2) RISO Isolation CISO Isolation Capacitance(2) VI-O = 0V, f = 1 MHz 500 1.0 V Vac(rms) Ω 0.2 pF *Typical values at TA = 25°C Notes: 1. Isolation Surge Voltage, VISO, is an internal device dielectric breakdown rating. 2. For this test, Pins 1, 2, 3 and 4 are common and Pins 5, 6, 7 and 8 are common. 3. VISO rating of 2500 VAC(rms) for t = 1 min. is equivalent to a rating of 3,000 VAC(rms) for t = 1 sec. 4. Current Transfer Ratio (CTR) = IC / IF x 100%. 3 MOCD223-M Rev. 1.0.0 www.fairchildsemi.com MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Electrical Characteristics (TA = 25°C unless otherwise specified) Fig. 2 Output Curent vs. Input Current Fig. 1 LED Forward Voltage vs. Forward Current 1.8 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 VF - FORWARD VOLTAGE (V) 1.7 1.6 1.5 1.4 TA = -55°C 1.3 1.2 TA = 25°C 1.1 TA = 100°C 1.0 1 10 100 IF - LED FORWARD CURRENT (mA) 1 VCE = 5V NORMALIZED TO I F = 1mA 0.1 0.1 1 Fig. 3 Output Current vs. Ambient Temperature 10 100 Fig. 4 Output Current vs. Collector - Emitter Voltage 2.0 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 IF - LED INPUT CURRENT (mA) 1 0.1 IF = 1mA, VCE = 5V NORMALIZED TO TA = 25oC 0.01 -80 -60 -40 -20 0 20 40 60 80 100 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 IF = 1mA NORMALIZED TO VCE = 5V 0.0 120 0 1 2 3 4 5 6 7 8 9 10 o TA - AMBIENT TEMPERATURE ( C) VCE - COLLECTOR -EMITTER VOLTAGE (V) Fig. 5 Dark Current vs. Ambient Temperature I CEO - COLLECTOR -EMITTER DARK CURRENT (nA) 10 5 10 4 VCE = 10V NORMALIZED TO TA= 25 oC 10 3 10 2 10 1 10 0 10 -1 10 -2 0 20 40 60 80 100 o TA - AMBIENT TEMPERATURE ( C) 4 MOCD223-M Rev. 1.0.0 www.fairchildsemi.com MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Typical Performance Curves WAVE FORMS VCC = 10V INPUT PULSE IC IF INPUT RL 10% OUTPUT OUTPUT PULSE 90% RBE tr ton tf toff Figure 6. Switching Time Test Circuit and Waveforms 5 MOCD223-M Rev. 1.0.0 www.fairchildsemi.com MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers TEST CIRCUIT Surface Mount 8-Pin Small Outline 0.024 (0.61) SEATING PLANE 0.164 (4.16) 0.144 (3.66) 0.060 (1.52) 0.275 (6.99) PIN1 0.155 (3.94) 0.202 (5.13) 0.182 (4.63) 0.010 (0.25) 0.006 (0.16) 0.143 (3.63) 0.123 (3.13) 0.021 (0.53) 0.011 (0.28) 0.008 (0.20) 0.003 (0.08) 0.050 (1.27) 0.244 (6.19) 0.224 (5.69) 0.050 (1.27) TYP Lead Coplanarity : 0.004 (0.10) MAX 6 MOCD223-M Rev. 1.0.0 www.fairchildsemi.com MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Package Dimensions MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Ordering Information Option Order Entry Identifier V V R1 R1 R1V R1V R2 R2 R2V R2V Description VDE 0884 Tape and reel (500 units per reel) VDE 0884, Tape and reel (500 units per reel) Tape and reel (2500 units per reel) VDE 0884, Tape and reel (2500 units per reel) Marking Information 1 D223 V X YY S 3 4 2 6 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 One digit year code, e.g., ‘3’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code 7 MOCD223-M Rev. 1.0.0 www.fairchildsemi.com 8.0 ± 0.10 3.50 ± 0.20 2.0 ± 0.05 Ø1.5 MIN 4.0 ± 0.10 0.30 MAX 1.75 ± 0.10 5.5 ± 0.05 12.0 ± 0.3 8.3 ± 0.10 5.20 ± 0.20 Ø1.5 ± 0.1/-0 6.40 ± 0.20 0.1 MAX User Direction of Feed Reflow Profile 300 260°C 280 260 >245°C = 42 Sec 240 220 200 180 °C Time above 183°C = 90 Sec 160 140 120 1.822°C/Sec Ramp up rate 100 80 60 40 33 Sec 20 0 0 60 120 180 270 360 Time (s) 8 MOCD223-M Rev. 1.0.0 www.fairchildsemi.com MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers Carrier Tape Specifications The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. FACT Quiet Series™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FAST® FASTr™ FPS™ FRFET™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyBoost™ TinyBuck™ TinyPWM™ TinyPower™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I20 9 MOCD223-M Rev. 1.0.0 www.fairchildsemi.com MOCD223-M Dual Channel Phototransistor Small Outline Surface Mount Optocouplers TRADEMARKS