PRODUCT DATASHEET Crystal series last update 16/12/2016 DETAILS Product Number FCN13595_CRYSTAL-MINE Family Crystal Type Pack Color white Diameter 50,3 mm Height 28,7 mm Style round Optic Material PMMA Holder Material Fastening pin, screw Status production ready ROHS Comliant Yes Date Updated 16/12/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XP-G 4.7 deg Spot 90 % 66.900 - XM-L2 6.9 deg Spot 90 % 35.000 - XP-G2 4.6 deg Spot 90 % 65.200 - XP-L 7 deg Spot 86 % 33.000 - XP-L HI 4.5 deg Spot 92 % 60.000 - XHP35 HI sim: 6,2 Spot sim: 94 % sim: 50.400 - XHP35 HD sim: 7,8 Spot sim: 94 % sim: 28.600 - LUXEON A 4.9 deg Spot 89 % 58.200 - LUXEON T 4.9 deg Spot 89 % 55.100 - LUXEON TX 5.0 deg Spot 94 % 50.600 - NCSxx19B 3,6 deg Spot 90 % 73.300 - NWSx229A 7 deg Spot 91 % 26.000 - NV4x144A 11 deg Spot 90 % 13.400 - NVSxx19B/NVSxx19C 6 deg Spot 93 % 48.000 - LH351Z 4.2 deg Spot 90 % 71.400 - LH351B 5.1 deg Spot 90 % 51.770 - Z8Y22P sim: 7,8 Spot sim: 94 % sim: 29.900 - June 9th 2017 5:16 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 Relative intensity of CN13595_CRYSTAL-MINE_(XM-L2) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 0-180 -10 -15 -20 -25 -30 Relative intensity of CN13595_CRYSTAL-MINE_(XP-G2) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 1 -10 -15 -20 -25 -30 Relative intensity of CN13595_CRYSTAL-MINE_(Luxeon_A) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 0-180 -10 -15 -20 -25 -30 Relative intensity of CN13595_CRYSTAL-MINE_(Luxeon_T) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 0-180 -10 -15 -20 -25 -30 Relative intensity of CN13595_CRYSTAL-MINE_(NCSxx19B) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 0-180 -10 -15 -20 -25 -30 Relative intensity of CN13595_CRYSTAL-MINE_(LH351Z) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 1: 0-180 -10 -15 -20 -25 -30 Relative intensity of CN13595_CRYSTAL-MINE_(LH351B) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 A B C D 5 4 20 2 21.52 c/c 4 2. Bottom view c/c 3 3 .3 1.19 28.73 50 Front view 2 Top view Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: class C According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE Crystal Assembly MechDrawing SIZE 1 PART NUMBER A4 SCALE D 2 1:1 WEIGHT - SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.