MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 D D D D D D D MC3303 . . . D, N, OR PW PACKAGE MC3403 . . . D, DB, N, NS, OR PW PACKAGE (TOP VIEW) Wide Range of Supply Voltages, Single Supply . . . 3 V to 36 V or Dual Supplies Class AB Output Stage True Differential Input Stage Low Input Bias Current Internal Frequency Compensation Short-Circuit Protection Designed to Be Interchangeable With Motorola MC3303, MC3403 1OUT 1IN– 1IN+ VCC+ 2IN+ 2IN– 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN– 4IN+ VCC– 3IN+ 3IN– 3OUT description The MC3303 and the MC3403 are quadruple operational amplifiers similar in performance to the µA741, but with several distinct advantages. They are designed to operate from a single supply over a range of voltages from 3 V to 36 V. Operation from split supplies also is possible, provided the difference between the two supplies is 3 V to 36 V. The common-mode input range includes the negative supply. Output range is from the negative supply to VCC – 1.5 V. Quiescent supply currents are less than one-half those of the µA741. The MC3303 is characterized for operation from –40°C to 85°C, and the MC3403 is characterized for operation from 0°C to 70°C. AVAILABLE OPTIONS PACKAGE TA VIOMAX AT 25°C PLASTIC SMALL OUTLINE (D, NS) 0°C to 70°C 10 mV MC3403D MC3403NS –40°C to 85°C 8 mV MC3303D PLASTIC SHRINK SMALL OUTLINE (DB) PLASTIC DIP (N) PLASTIC THIN SHRINK SMALL OUTLINE (PW) MC3403DB MC3403N MC3403PW — MC3303N MC3303PW The D package is available taped and reeled. Add R suffix to the device type (e.g., MC3403DR). The DB, NS, and PW packages are only available taped and reeled. logic diagram (each amplifier) IN+ + IN– – OUT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 schematic (each amplifier) Common Bias Circuitry VCC+ 5 pF IN+ To Three Other Amplifiers Output IN– 2.4 kΩ VCC– Component values shown are nominal. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V VCC– . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 V Supply voltage, VCC+ with respect to VCC– . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Differential input voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±36 V Input voltage (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V Package thermal impedance, θJA (see Note 4): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. These voltage values are with respect to the midpoint between VCC+ and VCC–. 2. Differential voltages are at IN+ with respect to IN–. 3. Neither input must ever be more positive than VCC+ or more negative than VCC–. 4. The package thermal impedance is calculated in accordance with JESD 51-7. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 recommended operating conditions VCC Supply voltage Dual supply voltage Dual-supply TA Operating free-air free air temperature MIN MAX 5 30 UNIT V VCC+ VCC– 2.5 15 V –2.5 –15 V MC3303 –40 85 MC3403 0 70 °C electrical characteristics at specified free-air temperature, VCC+ = 14 V, VCC– = 0 V for MC3303, VCC± = ±15 V for MC3403 (unless otherwise noted) PARAMETER VIO Input offset voltage See Note 5 aV Temperature coefficient of input offset voltage See Note 5 IIO Input offset current See Note 5 aI Temperature coefficient of input offset current See Note 5 IIB Input bias current See Note 5 VICR Common-mode input voltage range‡ VOM Peak P k output t t voltage swing IO IO MC3303 TEST CONDITIONS† MIN MC3403 TYP MAX 2 8 25°C Full range MIN TYP MAX 2 10 10 Full range 10 25°C 30 Full range 12 75 30 Full range 25°C –0.2 Full range 50 –0.5 –0.2 –1 VCC– to 12 VCC– to 12.5 VCC– to 13 VCC– to 13.5 25°C 12 12.5 ±12 ±13.5 RL = 2 kΩ 25°C 10 12 ±10 ±13 RL = 2 kΩ Full range 10 25°C 20 Full range 15 AVD Large-signal differential g g voltage amplification V RL = 2 kΩ VO = ±10 V, BOM Maximum-output-swing bandwidth VOPP = 20 V, AVD = 1, THD ≤ 5%, RL = 2 kΩ B1 φm Unity-gain bandwidth ri nA pA/C –0.5 –0.8 25°C RL = 10 kΩ 50 200 50 mV µV/°C 10 250 UNIT µA V V ±10 200 20 200 V/mV 15 25°C 9 9 kHz 25°C 1 1 MHz Phase margin VO = 50 mV, RL = 10 kΩ CL = 200 pF, RL = 2 kΩ Input resistance f = 20 Hz 25°C ro Output resistance f = 20 Hz 25°C CMRR Common-mode rejection ratio VIC = VICRmin 25°C kSVS Supply voltage sensitivity (∆VIO/∆VCC) VCC± = ±2.5 to ±15 V 25°C IOS Short-circuit output current§ 25°C 25°C 60° 0.3 60° 1 0.3 75 70 ±10 90 70 30 150 ±30 ±45 ±10 1 MΩ 75 Ω 90 dB 30 150 µV/V ±30 ±45 mA ICC Total supply current No load, See Note 5 25°C 2.8 7 2.8 7 mA † All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. Full range for TA is –40°C to 85°C for MC3303, and 0°C to 70°C for MC3403. ‡ The VICR limits are linked directly, volt-for-volt, to supply voltage; the positive limit is 2 V less than VCC+. § Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. NOTE 5: VIO, IIO, IIB, and ICC are defined at VO = 0 for MC3403 and VO = 7 V for MC3303. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 electrical characteristics, VCC+ = 5 V, VCC– = 0 V, TA = 25°C (unless otherwise noted) TEST CONDITIONS† PARAMETER VIO IIO Input offset voltage IIB MC3303 MIN TYP MC3403 MAX MIN TYP MAX UNIT VO = 2.5 V VO = 2.5 V 10 2 10 75 30 50 nA Input bias current VO = 2.5 V RL = 10 kΩ –0.5 –0.2 –0.5 µA VOM Peak output voltage swing‡ RL = 10 kΩ, VCC+ = 5 V to 30 V AVD Large-signal g g differential voltage amplification VO = 1 1.7 7 V to 3 3.3 3V V, RL = 2 kΩ kSVS Supply-voltage y g sensitivity y (∆VIO/∆VCC±) 5 V to ±15 V VCC± = ±2 ±2.5 Supply current VO = 2.5 V, No load f = 1 kHZ to 20 kHZ Input offset current ICC VO1/VO2 Crosstalk attenuation 3.3 3.5 3.3 VCC+ – 1.7 3.5 V VCC+ – 1.7 20 200 20 200 150 2.5 7 120 mV V/mV 150 2.5 7 120 µV/V mA dB † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. ‡ Output will swing essentially to ground. operating characteristics, VCC+ = 14 V, VCC– = 0 V for MC3303, VCC± = ±15 V for MC3403, TA = 25°C, AVD = 1 (unless otherwise noted) PARAMETER TYP UNIT VI = ±10 V, ∆VO = 50 mV, CL = 100 pF, RL = 2 kΩ, See Figure 1 0.6 V/µs CL = 100 pF, RL = 10 kΩ, See Figure 1 0.35 µs CL = 100 pF, RL = 10 kΩ, See Figure 1 0.35 µs Overshoot factor ∆VO = 50 mV, ∆VO = 50 mV, CL = 100 pF, RL = 10 kΩ, See Figure 1 20 % Crossover distortion VI(PP) = 30 mV, VOPP = 2 V, f = 10 kHZ 1 % SR Slew rate at unity gain tr tf Rise time Fall time TEST CONDITIONS PARAMETER MEASUREMENT INFORMATION – OUT + VI CL = 100 pF RL Figure 1. Unity-Gain Amplifier 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 TYPICAL CHARACTERISTICS† 30 ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ RL = 10 kΩ TA = 25°C 25 20 15 10 5 0 0 2 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VOPP – Maximum Peak-to-Peak Output Voltage – V VOPP – Maximum Peak-to-Peak Output Voltage – V MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE 4 6 8 10 12 14 16 30 25 20 15 ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ 10 5 VCC± = ±15 V CL = 0 RL = 10 kΩ TA = 25°C See Figure 1 0 1k 10 k 100 k f – Frequency – Hz |VCC±| – Supply Voltage – V Figure 3 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ VCC± = ±15 V RL = 2 kΩ TA = 25°C See Figure 1 10 105 Output Input Output Voltages – V A VD – Large-Signal Differential Voltage Amplification – dB Figure 2 106 104 103 102 ÎÎÎÎÎ ÎÎÎÎÎ VCC± = ±15 V RL = 2 kΩ TA = 25°C 10 1 1 10 100 1M 5 0 –5 Input –10 1k 10 k 100 k 1M 0 f – Frequency – Hz 10 20 30 40 50 60 70 80 90 t – Time –µs Figure 4 Figure 5 † Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002 TYPICAL CHARACTERISTICS† INPUT BIAS CURRENT vs SUPPLY VOLTAGE INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE ÎÎÎÎÎ ÎÎÎÎÎ 250 VCC± = ±15 V 200 150 100 200 150 100 50 50 0 –75 ÎÎÎÎ ÎÎÎÎ TA = 25°C I IB – Input Bias Current – mA I IB – Input Bias Current – mA 250 0 –50 –25 0 25 50 75 100 125 0 2 TA – Free-Air Temperature – °C 4 6 8 10 12 14 16 |VCC±| – Supply Voltage – V Figure 6 Figure 7 † Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) MC3303D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MC3303 MC3303DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MC3303 MC3303DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 MC3303 MC3303N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type -40 to 85 MC3303N MC3303NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type -40 to 85 MC3303N MC3303PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 M3303 MC3303PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 M3303 MC3303PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 M3303 MC3403D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 MC3403DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 MC3403DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 MC3403N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 MC3403N MC3403NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type 0 to 70 MC3403N MC3403NSLE OBSOLETE SO NS 14 TBD Call TI Call TI 0 to 70 MC3403NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 MC3403 MC3403PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 M3403 MC3403PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 0 to 70 M3403 Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2014 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 12-Mar-2016 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant MC3303DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 MC3303PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 MC3403DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 MC3403DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 MC3403NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 MC3403PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 12-Mar-2016 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) MC3303DR SOIC D 14 2500 367.0 367.0 38.0 MC3303PWR TSSOP PW 14 2000 367.0 367.0 35.0 MC3403DR SOIC D 14 2500 367.0 367.0 38.0 MC3403DR SOIC D 14 2500 333.2 345.9 28.6 MC3403NSR SO NS 14 2000 367.0 367.0 38.0 MC3403PWR TSSOP PW 14 2000 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2016, Texas Instruments Incorporated