TECHNICAL DATA SHEET Commercial Module for CATV & SLED Applications CM29-1.9 Single-Stage Thermoelectric Cooler RoHS EU Compliant TYPICAL PERFORMANCE VALUES Hot Side Temperature (°C) Δ Tmax (°C-dry N2): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): 27°C 71 4.3 1.9 3.5 1.54 85°C 92 5.2 1.8 4.4 -- MECHANICAL CHARACTERISTICS 10.20 POSITIVE (+) LEADWIRES: 30 AWG BUSS 6.02 NEGATIVE (-) 50.8 COLD SIDE, Tc 0.10 A 1.68 A HOT SIDE, Th -01AC, -04AC, -05AC ORDERING OPTIONS PRODUCT FEATURES Model Number Description CM29-1.9-01AC CM29-1.9-04AC CM29-1.9-05AC CM29-1.9-06AC Metallized Exterior, Buss Wires 146°C Pretinned Exterior, Buss Wires 138°C Pretinned Exterior, Buss Wires Bare Exterior, Insulated Leadwires • • • • • • • All dimensions are millimeters. All values are nominal values. Marlow reserves the right to make product changes without notice. Au flash exterior, suitable for soldering. AlO ceramics Minimum order quantity of 20 pieces. Maximum process temperature is 220°C. For customer support or general questions please contact a local office or visit our website at www.marlow.com. DOC # 102-0356 REV G - PAGE 1 OF 3 TECHNICAL DATA SHEET Commercial Module for CATV & SLED Applications CM29-1.9 Single-Stage Thermoelectric Cooler RoHS EU Compliant TYPICAL PERFORMANCE VALUES Hot Side Temperature (°C) Δ Tmax (°C-dry N2): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): 27°C 71 4.3 1.9 3.5 1.54 85°C 92 5.2 1.8 4.4 -- MECHANICAL CHARACTERISTICS 10.20 (2X 0.53) 5, 2X (+), RED LEADWIRES: 28 AWG, 7/36 STRANDING, TEFLON INSULATED WITH OVERALL NOMINAL DIAMETER OF 0.89 mm. ENDS PRETINNED WITH SAC SOLDER (-), BLACK WITH MAX. DIAMETER OF 0.70 mm. 6.02 60 COLD SIDE, Tc 0.10 A 1.62 A HOT SIDE, Th -06AC ORDERING OPTIONS PRODUCT FEATURES Model Number Description CM29-1.9-01AC CM29-1.9-04AC CM29-1.9-05AC CM29-1.9-06AC Metallized Exterior, Buss Wires 146°C Pretinned Exterior, Buss Wires 138°C Pretinned Exterior, Buss Wires Bare Exterior, Insulated Leadwires • • • • • • • All dimensions are millimeters. All values are nominal values. Marlow reserves the right to make product changes without notice. Au flash exterior, suitable for soldering. AlO ceramics Minimum order quantity of 20 pieces. Maximum process temperature is 220°C. For customer support or general questions please contact a local office or visit our website at www.marlow.com. DOC # 102-0356 REV G - PAGE 2 OF 3 ENVIRONMENT: ONE ATMOSPHERE DRY NITROGEN Hot Side Temperature 27°C Hot Side Temperature 85°C TA = 85°C - Vacuum Heat Load (W) 100.0 40.0 20.0 ∆T (°C) 80.0 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 60.0 ∆T (°C) Heat Load (W) 0.00 0.50 1.00 1.50 100.0 80.0 60.0 2.00 40.0 2.50 3.00 3.50 4.00 20.0 0.0 4.50 5.00 0.0 0.0 0.4 0.8 1.2 1.6 2.0 0.0 5.0 5.0 4.0 4.0 Voltage (VDC) Voltage (VDC) TYPICAL PERFORMANCE CURVES TA = 27°C - Vacuum Q=0 3.0 2.0 ∆T = 0 1.0 0.0 0.4 0.8 1.2 1.6 2.0 Q=0 3.0 2.0 ∆T = 0 1.0 0.0 0.0 0.4 0.8 1.2 1.6 2.0 0.0 Current (amps) 0.4 0.8 1.2 1.6 2.0 Current (amps) For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, contact one of our Applications Engineers at 877-627-5691. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. CONTACT US: For customer support or general questions please contact a local office below or visit our website at www.marlow.com. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 214-340-4900 (tel) 214-341-5212 (fax) 877-627-5691 (tech support) www.marlow.com Marlow Industries Europe GmbH Brunnenweg 19-21 64331 Weiterstadt Germany Tel.: +49 (0) 6150 5439 - 403 Fax: +49 (0) 6150 5439 - 400 [email protected] II-VI Japan Inc. WBG Marive East 17F 2-6 Nakase, Mihama-ku Chiba-Shi, Chiba 261-7117 Japan 81 43 297 2693 (tel) 81 43 297 3003 (fax) [email protected] www.ii-vi.co.jp II-VI Singapore Pte., Ltd. Blk. 5012, Techplace II #04-07 & 05-07/12, Ang Mo Kio Ave. 5 Singapore 569876 (65) 6481 8215 (tel) (65) 6481 8702 (fax) [email protected] www.ii-vi.com.sg Marlow Industries China, II-VI Technologies Beijing A subsidiary of II-VI Incorporated Rm 202, 1# Lize 2nd Middle Road Wangjing, Chaoyang District Beijing 100102 China 010-64398226 ext 105 (tel) 010-64399315 (fax) [email protected] DOC # 102-0356 REV G - PAGE 3 OF 3