February 12, 2007 SHIELDED SMD INDUCTOR DR358-1 SERIES Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Inductance Range from 1.0µH to 39.0µH Operating Temp. -20°C to +80°C Tinned Leads with Leaded Solder is Available (note 7) ELECTRICAL SPECIFICATIONS AT 25ºC Part No. DR358-1-102 DR358-1-222 DR358-1-272 DR358-1-332 DR358-1-392 DR358-1-472 DR358-1-562 DR358-1-682 DR358-1-822 DR358-1-103 DR358-1-123 DR358-1-153 DR358-1-183 DR358-1-223 DR358-1-273 DR358-1-333 DR358-1-393 Inductance (µH) ± 30% 1.0 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 DCR (Ω) Max. 0.045 0.075 0.105 0.110 0.155 0.162 0.170 0.200 0.245 0.200 0.210 0.240 0.338 0.397 0.441 0.694 0.709 I rated (A) Max. 1.72 1.32 1.28 1.04 0.88 0.84 0.80 0.76 0.68 0.61 0.56 0.50 0.48 0.41 0.35 0.32 0.30 MECHANICAL OUTLINES Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Inductance Test: 100kHz, 0.1Vrms 4. Irated for an approximate 40°C temperature rise 5. Irated for an approximate 35% drop maximum of the initial value 6. Tape and reel quantity, 2000 pcs/reel 7. For non-RoHS parts replace DR prefix with 42- (e.g. DR358-1 becomes 42-358-1) 8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C. DATATRONIC: 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.