MRC150,DH2,DV Re-circulating Chiller Innovative Technology for a Connected World The MRC Series is a bench top re-circulating chiller that offers dependable, compact performance by controlling the temperature of a coolant in a liquid circuit. The coolant is re-circulated using a pump with high MTBF. Heat from coolant is absorbed by a heat exchanger and dissipated thru high density heat sinks equipped with brand name fans. The thermoelectric modules are custom designed to achieve long life operation. The unit is regulated with an easy to use digital temperature controller and is housed inside an aesthetic sheet metal casing. Custom configurations are available, however, MOQ applies. FEATURES APPLICATIONS • • • • • • • • • • Compact Design Precise Temperature Control Reliable Solid State Operation Low Noise RoHS Compliant Specifications Cooling capacity1 Input voltage Operating environment temperature range2 Control temperature range using distilled H2O as coolant, °C (°F) 3 Control temperature range using 70% distilled H2O and 30% glycol as coolant 2 Controller accuracy Current, 115VAC (230VAC) Input power Frequency Dimensions, (h x w x d) Weight Maximum flow rate Fluid capacity UL Rating 1 2 3 global solutions: local support Americas: +1.800.843.4556 Europe: +49.8031.2460.0 Asia: +86.755.2714.1166 [email protected] www.lairdtech.com/thermal TM Medical Imaging Systems Medical Lasers Photonics Laser Systems Industrial Instrumentation Laboratory Testing 149 Watts 115 to 230 VAC 4.4°C to 45°C (40°F to 113°F) 2°C to 40°C (35°F to 104°F) -12°C to 40°C (10.4°F to 104°F) ±0.16°C 4.7 (2.4) Amps 294 Watts 50/60 Hz 30.4 x 19.5 x 35.1 cm (12.0 x 7.7 x 13.8) in 10.9 kgs (24 lbs) 2.9 lpm (0.76 gpm) 250 mL (8.4 oz) UL61010-1/IEC61010-1 Capacity rating is given at a temperature of 25°C (77°F) for the ambient air and exiting fluid. For ambient conditions outside this range, please contact Laird Technologies. For temperature settings below 5°C, an appropriate coolant must be used. MRC150,DH2,DV Re-circulating Chiller Innovative Technology for a Connected World Performance Curves Thermal Capacity Pumping Capacity ΔT = Outlet Fluid Temperature - Ambient Temperature 19.5 cm REF [7.683 in] 35.1 cm REF [13.82 in] 18.4 cm REF [7.24 in] Reservoir (250 mL Capacity) Low Fluid Level Indicator Digital Controller 30.4 cm REF [11.97 in] 26.1 cm REF [10.28 in] RS-232 COM Port (RS-485 Optional) Model Nomenclature Power Entry Module/Breaker Quick-Connect Fluid Input (3/8” I.D. Tubing) Quick-Connect Fluid Output (3/8” I.D. Tubing) (2) Male Couplings Supplied with Unit. Notes 1. Use distilled water as coolant for control temperatures above 5°C. 2. To prevent freezing, use coolant with 70% distilled water and 30% pure ethylene glycol mix for control temperatures at or below 5˚C. 3. For alternate coolants please contact Laird Technologies. 4. Unit comes with a 115 VAC North American cord and a 230 VAC European cord. THR-DS-MRC150 0910 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. Document A16311-00 Rev A, 09/17/2010.