xppower.com Specification • Regulated Single Output • SIP Package • 1000 VDC Isolation • Optional 3000 VDC Isolation • Continuous Short Circuit Protection • Non-conductive Black Plastic Case • MTBF >1.1 MHrs Input Voltage Input No Load Input Current Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Short Circuit Protection • Maximum Capacitive • Load See table No minimum load required ±0.5% max ±0.5% max (0% to full load) ±1.5% for 3.3 V versions ±2% max 75 mV pk-pk (20 MHz bandwidth) ±0.02%/°C Continuous with auto recovery 470 µF 5V 600 600 333 250 200 125 mA mA mA mA mA mA 53% 62% 67% 70% 68% 64% IS0503SA IS0505SA IS0509SA IS0512SA IS0515SA IS0524SA 12 V 60 60 60 60 60 60 mA mA mA mA mA mA 3.3 5.0 9.0 12.0 15.0 24.0 V V V V V V 600 600 333 250 200 125 mA mA mA mA mA mA 55% 60% 67% 69% 70% 68% IS1203SA IS1205SA IS1209SA IS1212SA IS1215SA IS1224SA 24 V 30 30 30 30 30 30 mA mA mA mA mA mA 3.3 5.0 9.0 12.0 15.0 24.0 V V V V V V 600 600 333 250 200 125 mA mA mA mA mA mA 54% 61% 65% 70% 71% 71% IS2403SA IS2405SA IS2409SA IS2412SA IS2415SA IS2424SA Mechanical Details See table 1000 VDC (3000 VDC -H option) 60 pF 50 kHz typical >1.1 MHrs to MIL-STD 217F 1 2 3 0.02 (0.50) -25 °C to +70 °C 1.26 (32.00) -40 °C to +125 °C Printed Face +100 °C max Convection-cooled Derate from 100% load at +70 °C to 0% load at +85 °C 0.12 (3.05) • Up to 90%, non-condensing 0.10 (2.54) 0.13 (3.40) 1.10 (27.94) Notes 1. Add suffix ‘-H’ to model number for 3000 VDC isolation. 2. All dimensions in inches (mm). 0.32 (8.00) 0.13 (3.40) 0.10 (2.50) 0.12 (3.05) 0.10 (2.54) 1.10 (27.94) • • • • • 0.13 (3.40) 0.55 (14.00) Environmental Humidity 0.32 (8.00) Printed Face 0.02 (0.50) Operating Temperature Storage Temperature Case Temperature 0.55 Cooling (14.00) Derating Model Number(1) V V V V V V 1.26 (32.00) • • • • • Efficiency 3.3 5.0 9.0 12.0 15.0 24.0 General Efficiency Isolation Voltage Isolation Capacitance Switching Frequency MTBF Output Current mA mA mA mA mA mA Output • • • • Output Voltage 100 100 100 100 100 120 Input Voltage Range • Nominal ±10% Input Current (no load) • See table Input Reflected Ripple • 20 mA pk-pk through 12 µH inductor, 5 Hz to 20 MHz Output Voltage Minimum Load Line Regulation Load Regulation DC-DC 3 Watts IS Series 0.03 (0.68) 0.13 (3.40) 1 2 3 0.10 (2.50) 9 10 11 12 0.02 (0.50) 0.01 (0.25) Pin 1 2 3 9 10 11 12 Standard ‘H’ Versions +Vin +Vin N.C. -Vin N.C. N.C. N.C. N.C. -Vout -Vout +Vout +Vout -Vin N.C. 03-Dec-07