D-Sub Crimp Connectors D-Sub Crimp Steckverbinder Ordering Code Bestellschlüssel UL Recognized File No. 168813 42 DS 10/2007 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN) Technical Data Technische Daten Mechanical Data Mechanische Daten Mechanical Data Mechanische Daten Mating force per signal contact Steckkraft pro Signalkontakt Unmating force per signal contact Ziehkraft pro Signalkontakt Maximum sized suitable cable outer diameter Maximal verwendbarer Kabelaußendurchmesser d3,4 N t0,2 N 2,2 mm (0.087“) Electrical Data Elektrische Daten Electrical Data Elektrische Daten Current rating Maximale Stromstärke Test voltage between 2 contacts / shell and contact Prüfspannung zwischen 2 Kontakten bzw. Kontakt und Gehäuse Meets transitional resistance requirements per contact pair in accordance with: Erfüllt Übergangswiderstand pro Kontaktpaar nach: - MIL-C-2430 / MIL-C-24308 - DIN 41652 / DIN 41652 Insulation resistance between contacts Isolationswiderstand Kontakt / Kontakt Volume resistivity (ASTM-D 257) Spezifischer Durchgangswiderstand (ASTM-D 257) Dielectric strength Spezifische Durchschlagsfestigkeit 5A 1200 V / 1 min. d 7,3 m: d 10 m: t5000 M: 1016 : cm 50 kV / mm Materials and Platings Materialien und Oberflächen Series / Baureihe Insulator Isolierkörper Relative temperature index according to UL 746 B Rel. Temperaturindex nach UL 746 B Heat deflection temperature limit according to DIN 53461 HDT/A Formbeständigkeitstemperatur nach DIN 53461 HDT/A Sub temperature limit Untere Grenztemperatur Shell Gehäuse Shell plating (standard) Gehäuseoberfläche (Standard) Materials and Platings Materialien und Oberflächen FL black thermoplastic, glass filled, (UL94V-0) schwarz, Thermoplast, glasfaserverstärkt, (UL94V-0) FU green, thermoplastic, glass filled (UL94V-0) grün, Thermoplast, glasfaserverstärkt, (UL94V-0) 115 °C (239 °F) 130 °C (266 °F) 185 °C (365 °F) 197 °C (386,6 °F) -55 °C (-67 °F) Steel Stahl yellow chromate over zinc plating, pin connector shell without dimples Not RoHS compliant! verzinkt und gelb chromatiert, Stiftsteckverbindergehäuse ohne Kontaktnoppen Nicht RoHS konform! ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 43 Shell Dimensions Gehäuseabmessungen Pin Connector Shell Stiftsteckverbindergehäuse Shell Size Gehäusegröße 1 2 3 4 5 A B C ±0,4 +0,2 ±0,15 (±0.016) (+0.008) (± 0.006) 30,8 16,9 25,0 (1.213) (0.665) (0.984) 39,1 25,2 33,3 (1.539) (0.992) (1.311) 53,0 38,9 47,04 (2.087) (1.531) (1.852) 69,3 55,3 63,5 (2.728) (2.177) (2.500) 66,9 52,8 61,1 (2.634) (2.079) (2.406) D E F G +0,2 ±0,4 ±0,3 ±0,3 (+0.008) (±0.016) (±0.012) (±0.012) 8,2 12,5 10,8 19,3 (0.323) (0.492) (0.425) (0.760) 8,2 12,5 10,8 27,5 (0.323) (0.492) (0.425) (1.083) 8,2 12,5 10,8 41,3 (0.323) (0.492) (0.425) (1.626) 8,2 12,5 10,8 57,7 (0.323) (0.492) (0.425) (2.272) 11,0 15,4 13,7 55,3 (0.433) (0.606) (0.539) (2.177) Socket Connector Shell Buchsensteckverbindergehäuse Shell Size Gehäusegröße 1 2 3 4 5 44 A ±0,4 (±0.016) 30,8 (1.213) 39,1 (1.539) 53,0 (2.087) 69,3 (2.728) 66,9 (2.634) DS 10/2007 B -0,2 (-0.008) 16,4 (0.646) 24,7 (0.972) 38,5 (1.516) 54,9 (2.161) 52,5 (2.067) C ±0,15 (±0.006) 25,0 (0.984) 33,3 (1.311) 47,04 (1.852) 63,5 (2.500) 61,1 (2.406) D -0,2 (-0.008) 8,0 (0.315) 8,0 (0.315) 8,0 (0.315) 8,0 (0.315) 10,8 (0.425) E F G ±0,4 ±0,3 ±0,3 (±0.016) (±0.012) (±0.012) 12,5 10,8 19,3 (0.492) (0.425) (0.760) 12,5 10,8 27,5 (0.492) (0.425) (1.083) 12,5 10,8 41,3 (0.492) (0.425) (1.626) 12,5 10,8 57,7 (0.492) (0.425) (2.272) 15,4 13,7 55,3 (0.606) (0.539) (2.177) TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN) Machined Contacts for Crimp Connectors Gedrehte Kontakte für Crimpsteckverbinder Pin Stift Socket Buchse Wire Size (AWG) Drahtgröße (AWG) 18-22 18-22 18-22 20-24 20-24 20-24 20-24 20-24 20-24 26-28 26-28 26-28 26-28 Order Number Bestellnummer FK20S18-02V... FK20PL18-02V... FK20SL18-02V... FK20P-13V... FK20S-13V... FK20PL-02V... FK20SL-02V... FK20PL-08V... FK20SL-08V... FK20P26-13V... FK20S26-13V... FK20PL26-02V... FK20SL26-02V... MIL-No. MIL-Nummer M24308/11-1, M39029/64-369 M24308/10-1, M39029/63-368 Packing Unit Verpackungseinheit Au (Over Ni) Au über Ni 0,2 µm (8 microinches) 0,2 µm (8 microinches) 0,2 µm (8 microinches) 1,3 µm (51 microinches) 1,3 µm (51 microinches) 0,2 µm (8 microinches) 0,2 µm (8 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 1,3 µm (51 microinches) 1,3 µm (51 microinches) 0,2 µm (8 microinches) 0,2 µm (8 microinches) Type Typ Socket / Buchse Pin / Stift Socket / Buchse Pin / Stift Socket / Buchse Pin / Stift Socket / Buchse Pin / Stift Socket / Buchse Pin / Stift Socket / Buchse Pin / Stift Socket / Buchse Ordering Example Bestellbeispiel Packing Unit (Pieces) Verpackungseinheit (Stück) 100 1000 5000 Addition to Order Number Bestellnummernergänzung _0100 _1000 _5000 FK20SL-08V_0100 FK20SL-08V Crimp socket contact for wire size 20 - 24, plating 0.8 µm (31 microinches) Au over Ni. Crimpbuchsenkontakt für Drahtgröße AWG 20 ‑ 24, Oberfläche 0,8 µm Au über Ni. _0100 100 pieces are packed in one bag. 100 Stück in einem Beutel verpackt. Crimping Tools Crimpwerkzeuge Contact Type Kontakttyp For use with contact types: FK20S18, FK20P, FK20S, FK20P26, FK20S26 Für Kontakttypen: FK20S18, FK20P, FK20S, FK20P26, FK20S26 For use with contact types: FK20PL18, FK20SL18, FK20PL, FK20SL, FK20PL26, FK20SL26 Für Kontakttypen: FK20PL18, FK20SL18, FK20PL, FK20SL, FK20PL26, FK20SL26 Tool Werkzeug Hand crimp tool M22520/2-01 and positioner M22520/2-08 Handcrimpzange M22520/2-01 und Einsatz M22520/2-08 See page 49 Siehe Seite 49 Hand crimp tool M22520/2-01 and positioner K761 or hand crimp tool including positioner 2761 Handcrimpzange M22520/2-01 und Einsatz K761 oder Handcrimpzange inklusive Einsatz 2761 ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 45 Stamped Contacts for Crimp Connectors Gestanzte Kontakte für Crimpsteckverbinder Pin Stift 46 Socket Buchse Wire Size (AWG) Drahtgröße Order Number Bestellnummer 20-24 P7L 20-24 S7L 20-24 P7LR 20-24 S7LR 20-24 P7L-K176 20-24 S7L-K176 20-24 P7LR-K176 20-24 S7LR-K176 20-24 P7LSR-K176 20-24 S7LSR-K176 24-28 P7L26 24-28 S7L26 24-28 P7LR26 24-28 S7LR26 24-28 P7L26-K176 24-28 S7L26-K176 24-28 P7LR26-K176 24-28 S7LR26-K176 24-28 P7LSR26-K176 24-28 S7LSR26-K176 Au (over Ni) Au über Ni 0,1 µm (4 microinches) 0,1 µm (4 microinches) 0,1 µm (4 microinches) 0,1 µm (4 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 0,1 µm (4 microinches) 0,1 µm (4 microinches) 0,1 µm (4 microinches) 0,1 µm (4 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) 0,8 µm (31 microinches) DS 10/2007 Type Typ Crimping Tools Crimpwerkzeuge Pin / Stift F1089 Socket / Buchse F1089 Pin / Stift Socket / Buchse Pin / Stift F1089 Socket / Buchse F1089 Pin / Stift Socket / Buchse Pin / Stift F1128 Socket / Buchse F1128 Pin / Stift F1089 Socket / Buchse F1089 Pin / Stift Socket / Buchse Pin / Stift F1089 Socket / Buchse F1089 Pin / Stift Socket / Buchse Pin / Stift F1128 Socket / Buchse F1128 Packing Unit Verpackungseinheit 10 strips of 25 pieces in a box 10 Streifen á 25 Stück in einer Schachtel 10 strips of 25 pieces in a box 10 Streifen á 25 Stück in einer Schachtel 10,000 pieces on a reel auf Rolle zu 10.000 Stück 10,000 pieces on a reel auf Rolle zu 10.000 Stück 10 strips of 25 pieces in a box 10 Streifen á 25 Stück in einer Schachtel 10 strips of 25 pieces in a box 10 Streifen á 25 Stück in einer Schachtel 10,000 pieces on a reel auf Rolle zu 10.000 Stück 10,000 pieces on a reel auf Rolle zu 10.000 Stück 350 pieces on a reel auf Rolle zu 350 Stück 350 pieces on a reel auf Rolle zu 350 Stück 10 strips of 25 pieces in a box 10 Streifen á 25 Stück in einer Schachtel 10 strips of 25 pieces in a box 10 Streifen á 25 Stück in einer Schachtel 10,000 pieces on a reel auf Rolle zu 10.000 Stück 10,000 pieces on a reel auf Rolle zu 10.000 Stück 10 strips of 25 pieces in a box 10 Streifen á 25 Stück in einer Schachtel 10 strips of 25 pieces in a box 10 Streifen á 25 Stück in einer Schachtel 10,000 pieces on a reel auf Rolle zu 10.000 Stück 10,000 pieces on a reel auf Rolle zu 10.000 Stück 350 pieces on a reel auf Rolle zu 350 Stück 350 pieces on a reel auf Rolle zu 350 Stück TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN) Stamped Contacts, Feed Direction and Machine Setup Gestanzte Kontakte, Zuführungsrichtung und Lage Version I: Entry from Right Side with Turn Round (Standard) Variante I: Zuführung von der rechten Seite mit Umlenkung (Standard) Ordering Example for Crimp Contacts on a Reel Bestellbeispiel für Bandcrimpkontakte Stamped contacts, entry from right side with turn round, wire size (AWG) 20-24, 0.1 µm (4 microinches) Au over Ni, type pin, 10,000 pieces on a reel. Gestanzte Kontakte, Zuführung von der rechten Seite mit Umlenkung, Drahtgröße 20-24, 0,1 µm Au über Ni, Typ Stift, auf Rolle zu 10.000 Stück. Pin: Stift: P7LR Version II: Entry from Left Side with Turn Round Variante II: Zuführung von der linken Seite mit Umlenkung Addition to order number for version II Bestellnummernergänzung für Variante II -V2 Ordering Example for Crimp Contacts on a Reel Bestellbeispiel für Bandcrimpkontakte Stamped contacts, entry from left side with turn round, wire size (AWG) 20‑24, 0,1 µm (4 microinches) Au over Ni, type pin, 10,000 pieces on a reel. Gestanzte Kontakte, Zuführung von der linken Seite mit Umlenkung, Drahtgröße 20-24, 0,1 µm Au über Ni, Typ Stift, auf Rolle zu 10.000 Stück. Pin: Stift: P7LR-V2 ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE DS 10/2007 47 Stamped Contacts, Feed Direction and Machine Setup Gestanzte Kontakte, Zuführungsrichtung und Lage Version III: Entry from Left Side Variante III: Direkte Zuführung von der linken Seite Addition to order number for version III Bestellnummernergänzung für Variante III -V3 Ordering Example for Crimp Contacts on a Reel Bestellbeispiel für Bandcrimpkontakte Stamped contacts, entry from left side, wire size (AWG) 20-24, 0.1 µm (4 microinches) Au over Ni, type pin, 10,000 pieces on a reel. Gestanzte Kontakte, direkte Zuführung von der linken Seite, Drahtgröße 20‑24, 0,1 µm Au über Ni, Typ Stift, auf Rolle zu 10.000 Stück. Pin: Stift: P7LR-V3 Version IV: Entry from Right Side Variante IV: Direkte Zuführung von der rechten Seite Addition to order number for version IV Bestellnummernergänzung für Variante IV -V4 Ordering Example for Crimp Contacts on a Reel Bestellbeispiel für Bandcrimpkontakte Stamped contacts, entry from right side, wire size (AWG) 20-24, 0.1 µm (4 microinches) Au over Ni, type pin, 10.000 pieces on a reel. Gestanzte Kontakte, direkte Zuführung von der rechten Seite, Drahtgröße 20-24, 0,1 µm Au über Ni, Typ Stift, auf Rolle zu 10.000 Stück. Pin: Stift: 48 P7LR-V4 DS 10/2007 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN) Tools Werkzeuge Hand Crimp Tool M22520/2-01 for Machined Contacts Handcrimpzange M22520/2-01 für gedrehte Kontakte Hand Crimp Tool 2761 with Crimp Die for Machined Contacts Handcrimpzange 2761 mit Crimpeinsatz für gedrehte Kontakte Die / Einsatz Order Number Bestellnummer Order Number Bestellnummer Hand crimp tool Handcrimpzange Positioner Einsatz Positioner Einsatz M22520/2-01 M22520/2-08 Wire size: AWG 18 to AWG 28 Drahtgröße: AWG 18 bis AWG 28 2761 Wire size: AWG 20 to AWG 26 Drahtgröße: AWG 20 bis AWG 26 Suitable for contact types: see page 45 Verwendbar für Kontakttypen: siehe Seite 45 K761 Hand Crimp Tool F1128 for Stamped D-Sub Contacts on a Reel Handcrimpzange F1128 für gestanzte D-Sub Kontakte auf Rollen Hand crimp tool Handcrimpzange Hand crimp tool with crimp die Handcrimpzange mit Crimpeinsatz Order Number Bestellnummer Wire size: AWG 20 to AWG 28 Drahtgröße: AWG 20 bis AWG 28 F1128 For reels of up to 300 pieces Für Rollen á 300 Stück Plastic Insertion / Removal Tool Ein- und Ausbauwerkzeug aus Kunststoff Hand Crimp Tool F1089 for Stamped Contacts Handcrimpzange F1089 für gestanzte Kontakte Hand crimp tool Handcrimpzange Metal Insertion / Removal Tools Ein- und Ausbauwerkzeuge aus Metall Order Number Bestellnummer Insertion tool DAK273 Einbauwerkzeug Removal tool DRK273 Ausbauwerkzeug Order Number Bestellnummer Insertion / Removal tool M81969/1-02 Ein- und Ausbauwerkzeug ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE Order Number Bestellnummer Wire size: AWG 20 to AWG 28 F1089 Drahtgröße: AWG 20 bis AWG 28 DS 10/2007 49 FU Series (Crimp Connectors According to MIL-C-24308) FU Serie (Crimpsteckverbinder nach MIL-C-24308) FU connectors are fitted with an insulator for a higher contact retention strength (≥50N) and improved heat resistance (up to 130 ºC (266 ºF) as required by UL). They fully meet the requirements of MIL C-24308, but are supplied with a plastic spring contact retention system for signal contacts. Discrepancies in diameter to MIL: Insulator depth 10.8 mm (4.25“) (MIL-specification 9.5 mm (3,75“) max.). FU-Steckverbinder sind mit einem Isolierkörper für höhere Kontakthaltekraft (≥ 50N) und bessere Temperaturbeständigkeit (bis 130 ºC entsprechend UL 746 B) ausgeführt. Sie erfüllen die Anforderungen gemäß der MIL C-24308, besitzen jedoch ein Plastikfeder-Kontakthaltesystem für Signalkontakte. Maßabweichung von der MIL: Isolierkörpertiefe 10,8 mm (MIL-Angabe 9,5 mm max.). Shell Size Gehäusegröße 1 2 3 4 5 Illustration: Abbildung: Number of Contacts Polzahl 9 15 25 37 50 Pin Connector Stiftsteckverbinder FU09P7 FU15P7 FU25P7 FU37P7 FU50P7 Socket Connector Buchsensteckverbinder FU09S7 FU15S7 FU25S7 FU37S7 FU50S7 FU 25P7 connector and contacts FU 25P7 Steckverbinder und Kontakte Modification No. Modifikationsnummer ...0970 ...1475 Technical Specification Technische Spezifikation Contacts Shell Plating Kontakte Gehäuseoberfläche Tin plated over nickel, pin connector shell with dimples without contacts verzinnt über Nickel, Stiftsteckverbindergehäuse mit ohne Kontakte Kontaktnoppen Zinc plating, not RoHS compliant verzinkt, nicht RoHS konform Contact Technical Data Technische Daten der Kontakte Wire size Drahtgröße Plating Oberfläche Crimping tools Crimpwerkzeuge Contacts Kontakte 50 Contact Technical Data Technische Daten der Kontakte AWG 20 to AWG 24 AWG 20 bis AWG 24 1.3 µm (51 microinches) Au over Ni 1,3 µm Au über Ni Hand crimp tool M22520/2-01 with positioner M22520/2-08 or hand crimp tool 2761 Handcrimpzange M22520/2-01 mit Einsatz M22520/2-08 oder Handcrimpzange 2761 With machined contacts as standard FK20P... or FK20S... (supplied separately, not mounted) Serienmäßig mit gedrehten Kontakten FK20P... bzw. FK20S... (als Beipack, nicht montiert) DS 10/2007 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Molex: FK20S-13V_0100 FK20P-13V_0100 FL25P7-K120 FL25S7-K121 FK20PL-02V_0100 FK20SL18-02V_0100 FL09P7-K120 FL09S7-K121 FL37P7-K120 FL37S7-K121 FL15P7-K120 FL15S7-K121 FL50S7-K121 FL50P7K120 FL09P7-K121 FK20PL-08V-5000