GS15E 12~15W AC-DC Single Output Wall-mounted type series Features : Universal AC input / Full range No load power consumption <0.3W ErP step2 compliant Meet EISA 2007 (Energy Independence and Security Act) 2 pole EURO plug Class power (without earth pin) Protections: Short circuit / Overload / Over voltage Pass LPS Fully enclosed plastic case Approvals: TUV / CB / FCC / CE 2 years warranty TUV Rheinland Product Safety SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT geprUfre Sicherheit GS15E-1P1J GS15E-11P1J GS15E-2P1J GS15E-3P1J GS15E-4P1J GS15E-5P1J GS15E-6P1J GS15E-8P1J GPSU15E-1 GPSU15E-1-1 GPSU15E-2 GPSU15E-3 GPSU15E-4 GPSU15E-5 GPSU15E-6 GPSU15E-8 7.5V 9V 12V 15V 18V 24V 48V Note.2 5V RATED CURRENT 2.40A 1.60A 1.66A 1.25A 1.00A 0.83A 0.62A 0.31A CURRENT RANGE 0 ~ 2.40A 0 ~ 1.60A 0 ~1.66A 0 ~ 1.25A 0 ~ 1.00A 0 ~ 0.83A 0 ~ 0.62A 0 ~ 0.31A RATED POWER 12W 12W 15W 15W 15W 15W 15W 15W 80mVp-p 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 240mVp-p 5 ~ 6V 6 ~ 8V 8 ~ 11V 11 ~ 13V 13 ~ 16V 16 ~ 21V 21 ~ 27V 33 ~ 48V Fixed VOLTAGE TOLERANCE Note.4 5.0% RIPPLE & NOISE (max.) Note.3 50mVp-p VOLTAGE ADJ. RANGE 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% LINE REGULATION Note.5 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 3000ms, 50ms, 16ms at full load 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE 47 ~ 63Hz FREQUENCY RANGE INPUT EFFICIENCY (Typ.) Note.7 75% AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) 81% SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC 83% 85% 50A / 230VAC 0.25mA / 240VAC 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION NOTE 80% WORKING HUMIDITY OVER VOLTAGE CONNECTOR 80% WORKING TEMP. OVERLOAD OTHERS 80% 105 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% rated output voltage Protection type : Clamp by zener diode 0 ~ +50 (Refer to "Derating Curve") PROTECTION (Note. 8) 78% 0.5A / 100VAC -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes EN60950-1 approved I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022, EN61000-3-2,3, FCC part 15 Class B EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING PLUG 500Khrs min. MIL-HDBK-217F(25 ) 34*71*50mm (L*W*H) 180g ; 60pcs / 12Kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type center positive for stock ; Other type available by customer requested CABLE Standard type 18Awg UL1185 6ft and 5ft for 3.3V output only for stock ; Other type available by customer requested Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 230VAC. 8.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:GS15E-SPEC 2011-06-14 GS15E 12~15W AC-DC Single Output Wall-mounted type Mechanical Specification series Unit:mm 34.5 NAME PLATE Plug Assignment 22 Standard plug: P1J P1J 18.6 CENTER + UL1185 18AWG 1830 +100/-0 50 1 70 1 OUTPUT 0.05 19 0.5 4 28 P/N 71.5 1 11 34 1 C"+" ID 2.1 x OD 5.5 Static Characteristics Derating Curve 100 LOAD (%) LOAD (%) 100 70 0 10 20 30 Ta ( 40 ) 50 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:GS15E-SPEC 2011-06-14