200W Single Output Switching Power Supply ■ Features AC input range selectable by switch Withstand 300VAC surge input for 5 second Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection 1U low profile Withstand 5G vibration test LED indicator for power on No load power consumption<0.75W 100% full load burn-in test High operating temperature up to 70℃ Operating altitude up to 5000 meters (Note.8) High efficiency, long life and high reliability 3 years warranty LRS-200 series ■ Applications Industrial automation machinery Industrial control system Mechanical and electrical equipment Electronic instruments, equipments or apparatus ■ Description LRS-200 series is a 200W single-output enclosed type power supply with 30mm of low profile design. Adopting the input of 115VAC or 230VAC (select by switch), the entire series provides an output voltage line of 3.3V, 4.2V, 5V, 12V, 15V, 24V, 36V and 48V. In addition to the high efficiency up to 90%, the design of metallic mesh case enhances the heat dissipation of LRS-200 that the whole series operates from -25℃ through 70℃ under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.75W), it allows the end system to easily meet the worldwide energy requirement. LRS-200 has the complete protection functions and 5G antivibration capability; it is complied with the international safety regulations such as UL 60950-1. LRS-200 series serves as a high price-to-performance power supply solution for various industrial applications. ■ Model Encoding LRS - 200 - 3.3 Output voltage Output power Series name File Name:LRS-200-SPEC 2015-12-31 LRS-200 200W Single Output Switching Power Supply series SPECIFICATION LRS-200-3.3 LRS-200-4.2 LRS-200-5 LRS-200-12 LRS-200-15 LRS-200-24 LRS-200-36 LRS-200-48 DC VOLTAGE 3.3V 4.2V 5V 12V 15V 24V 36V 48V RATED CURRENT 40A 40A 40A 17A 14A 8.8A 5.9A 4.4A CURRENT RANGE 0 ~ 40A 0 ~ 40A 0 ~ 40A 0 ~ 17A 0 ~ 14A 0 ~ 8.8A 0 ~ 5.9A 0 ~ 4.4A RATED POWER 132W 168W 200W 204W 210W 211.2W 212.4W 211.2W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p VOLTAGE ADJ. RANGE 3.6 ~ 4.4V 4.5 ~ 5.5V 10.2 ~ 13.8V 13.5 ~ 18V 21.6 ~ 28.8V 32.4 ~ 39.6V 43.2 ~ 52.8V VOLTAGE TOLERANCE Note.3 ±3.0% ±4.0% ±3.0% ±1.5% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION Note.4 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION Note.5 ±2.5% ±2.5% ±2.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% 89.5% 90% MODEL OUTPUT INPUT SETUP, RISE TIME 1300ms, 50ms/230VAC HOLD UP TIME (Typ.) 16ms/230VAC VOLTAGE RANGE 90 ~ 132VAC / 180 ~ 264VAC by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 83% AC CURRENT (Typ.) 4A/115VAC INRUSH CURRENT (Typ.) COLD STAR 60A/115VAC LEAKAGE CURRENT <2mA / 240VAC OVER LOAD PROTECTION 2.97 ~ 3.6V OVER VOLTAGE 1300ms,50ms/115VAC at full load 12ms/115VAC at full load 86% 240 ~ 370VDC 87.5% 87% (switch on 230VAC) 88% 89.5% 2.2A/230VAC 60A/230VAC 110 ~ 140% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 4.6 ~ 5.4V 5.75 ~ 6.75V 13.8 ~ 16.2V 18 ~ 21V 28.8 ~ 33.6V 41.4 ~ 46.8V 55.2 ~ 64.8V Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER TEMPERATURE Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. -25 ~ +70℃ (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT SAFETY ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH MTBF OTHERS DIMENSION PACKING NOTE 347.5K hrs min. MIL-HDBK-217F (25℃) 215*115*30mm (L*W*H) 0.66Kg; 15pcs/10.9Kg/0.78CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. 7.The 150% peak load capability is built in for up to 1 second for 12~48V.LRS-200 will enter hiccup mode if the peak load is delivered for over 1 second and will recover once it resumes to the rated current level(115VAC/230VAC). 8. The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m(6500ft). File Name:LRS-200-SPEC 2015-12-31 LRS-200 200W Single Output Switching Power Supply series Block Diagram 115/230V(SW) EMI FILTER I/P POWER SWITCHING RECTIFIERS RECTIFIERS & FILTER fosc : 65KHz RECTIFIERS & FILTER +V -V O.T.P. O.V.P. FG O.L.P. PWM CONTROL Derating Curve Static Characteristics 100 100 12~48V 80 90 3.3~5V 70 50 LOAD (%) LOAD (%) 180 ~ 264VAC 90 ~ 132VAC 80 60 40 20 -25 DETECTION CIRCUIT 60 50 40 -20 -10 0 10 20 30 40 AMBIENT TEMPERATURE (℃) 50 60 70 (HORIZONTAL) 90 180 95 190 100 200 105 210 110 220 115 230 120 240 125 250 132 264 INPUT VOLTAGE (VAC) 60Hz File Name:LRS-200-SPEC 2015-12-31 LRS-200 200W Single Output Switching Power Supply Mechanical Specification Case No. 207 series Unit:mm 215 32.5 150 LED +V ADJ. 9 4-M4 L=3mm 7 50 6 115 133 9.5 8 5 8 4 3 32.5 2 16 1 15 150 32.5 Terminal Pin No. Assignment : 6.5 6.5 12.5 30 12.8 6.9 2 4-M4(Both Sides) L=5mm Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. Assignment 4~6 DC OUTPUT -V 7~9 DC OUTPUT +V Installation Manual Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html File Name:LRS-200-SPEC 2015-12-31