QFET TM FQP30N06L 60V LOGIC N-Channel MOSFET General Description Features These N-Channel enhancement mode power field effect transistors are produced using Fairchild’s proprietary, planar stripe, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for low voltage applications such as automotive, DC/ DC converters, and high efficiency switching for power management in portable and battery operated products. • • • • • • • 32A, 60V, RDS(on) = 0.035Ω @VGS = 10 V Low gate charge ( typical 15 nC) Low Crss ( typical 50 pF) Fast switching 100% avalanche tested Improved dv/dt capability 175°C maximum junction temperature rating D ! " G G! DS ! " " " TO-220 ! FQP Series Absolute Maximum Ratings Symbol VDSS ID S TC = 25°C unless otherwise noted Parameter Drain-Source Voltage - Continuous (TC = 25°C) Drain Current - Continuous (TC = 100°C) IDM Drain Current - Pulsed (Note 1) FQP30N06L 60 Units V 32 A 22.6 A 128 A ± 20 V 350 mJ VGSS Gate-Source Voltage EAS Single Pulsed Avalanche Energy (Note 2) IAR Avalanche Current (Note 1) 32 A EAR Repetitive Avalanche Energy Peak Diode Recovery dv/dt Power Dissipation (TC = 25°C) (Note 1) 7.9 7.0 79 0.53 -55 to +175 mJ V/ns W W/°C °C 300 °C dv/dt PD TJ, TSTG TL (Note 3) - Derate above 25°C Operating and Storage Temperature Range Maximum lead temperature for soldering purposes, 1/8" from case for 5 seconds Thermal Characteristics Symbol RθJC Parameter Thermal Resistance, Junction-to-Case Typ -- RθCS Thermal Resistance, Case-to-Sink 0.5 -- °C/W RθJA Thermal Resistance, Junction-to-Ambient -- 62.5 °C/W ©2001 Fairchild Semiconductor Corporation Max 1.90 Units °C/W Rev. A1. May 2001 FQP30N06L May 2001 Symbol TC = 25°C unless otherwise noted Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA 60 -- -- V ∆BVDSS / ∆TJ Breakdown Voltage Temperature Coefficient ID = 250 µA, Referenced to 25°C -- 0.06 -- V/°C VDS = 60 V, VGS = 0 V -- -- 1 µA VDS = 48 V, TC = 150°C -- -- 10 µA Gate-Body Leakage Current, Forward VGS = 20 V, VDS = 0 V -- -- 100 nA Gate-Body Leakage Current, Reverse VGS = -20 V, VDS = 0 V -- -- -100 nA Gate Threshold Voltage VDS = VGS, ID = 250 µA 1.0 -- 2.5 V RDS(on) Static Drain-Source On-Resistance VGS = 10 V, ID = 16 A VGS = 5 V, ID =16 A --- 0.027 0.035 0.035 0.045 Ω gFS Forward Transconductance VDS = 25 V, ID = 16 A -- 24 -- S -- 800 1040 pF -- 270 350 pF -- 50 65 pF IDSS IGSSF IGSSR Zero Gate Voltage Drain Current On Characteristics VGS(th) (Note 4) Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 25 V, VGS = 0 V, f = 1.0 MHz Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDD = 30 V, ID = 16 A, RG = 25 Ω (Note 4, 5) VDS = 48 V, ID = 32 A, VGS = 5 V (Note 4, 5) -- 15 40 ns -- 210 430 ns -- 60 130 ns -- 110 230 ns -- 15 20 nC -- 3.5 -- nC -- 8.5 -- nC Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain-Source Diode Forward Current -- -- 32 A ISM -- -- 128 A VSD Maximum Pulsed Drain-Source Diode Forward Current VGS = 0 V, IS = 32 A Drain-Source Diode Forward Voltage -- -- 1.5 V trr Reverse Recovery Time -- 60 -- ns Qrr Reverse Recovery Charge VGS = 0 V, IS = 32 A, dIF / dt = 100 A/µs -- 90 -- nC (Note 4) Notes: 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L = 400µH, IAS = 32A, VDD = 25V, RG = 25 Ω, Starting TJ = 25°C 3. ISD ≤ 32A, di/dt ≤ 300A/us, VDD ≤ BVDSS, Starting TJ = 25°C 4. Pulse Test : Pulse width ≤ 300us, Duty cycle ≤ 2% 5. Essentially independent of operating temperature ©2001 Fairchild Semiconductor Corporation Rev. A1. May 2001 FQP30N06L Electrical Characteristics FQP30N06L Typical Characteristics 10 Top : ID, Drain Current [A] ID, Drain Current [A] 2 VGS 10.0 V 8.0 V 6.0 V 5.0 V 4.5 V 4.0 V 3.5 V Bottom : 3.0 V 2 10 1 10 1 10 175℃ 25℃ ※ Notes : 1. 250μ s Pulse Test 2. TC = 25℃ ※ Notes : 1. VDS = 25V 2. 250μ s Pulse Test -55℃ 0 10 -1 10 0 0 10 1 10 10 0 2 VDS, Drain-Source Voltage [V] 4 6 8 10 VGS, Gate-Source Voltage [V] Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 80 2 10 IDR , Reverse Drain Current [A] RDS(ON) [mΩ ], Drain-Source On-Resistance 60 VGS = 10V VGS = 5V 40 20 ※ Note : TJ = 25℃ 1 10 0 0 0 20 40 60 80 100 10 120 0.4 0.6 ID, Drain Current [A] 0.8 1.2 1.4 1.6 Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature 2000 12 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd 10 Coss VDS = 30V Ciss ※ Notes : 1. VGS = 0 V 2. f = 1 MHz 1000 Crss 500 V GS , Gate-Source Voltage [V] 1500 1.0 VSD, Source-Drain voltage [V] Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage Capacitance [pF] ※ Notes : 1. VGS = 0V 2. 250μ s Pulse Test 25℃ 175℃ VDS = 48V 8 6 4 2 ※ Note : ID = 32A 0 0 -1 10 0 10 1 Figure 5. Capacitance Characteristics ©2001 Fairchild Semiconductor Corporation 0 5 10 15 20 25 30 10 VDS, Drain-Source Voltage [V] QG, Total Gate Charge [nC] Figure 6. Gate Charge Characteristics Rev. A1. May 2001 (Continued) 1.2 2.5 2.0 1.1 RDS(ON) , (Normalized) Drain-Source On-Resistance BV DSS , (Normalized) Drain-Source Breakdown Voltage FQP30N06L Typical Characteristics 1.0 ※ Notes : 1. VGS = 0 V 2. ID = 250 μ A 0.9 0.8 -100 -50 0 50 100 150 1.5 1.0 0.5 ※ Notes : 1. VGS = 10 V 2. ID = 16 A 0.0 -100 200 -50 0 50 100 150 200 o o TJ, Junction Temperature [ C] TJ, Junction Temperature [ C] Figure 7. Breakdown Voltage Variation vs. Temperature Figure 8. On-Resistance Variation vs. Temperature 40 Operation in This Area is Limited by R DS(on) 30 2 100 µ s ID , Drain Current [A] ID , Drain Current [A] 10 1 ms 10 ms DC 10 1 ※ Notes : 20 10 o 1. TC = 25 C o 2. TJ = 175 C 3. Single Pulse 0 10 -1 10 10 0 1 10 10 0 25 2 50 VDS, Drain-Source Voltage [V] 0 125 150 175 Figure 10. Maximum Drain Current vs. Case Temperature 0 .2 ※ N otes : 1 . Z θ J C( t ) = 1 . 9 0 ℃ /W M a x . 2 . D u t y F a c t o r , D = t 1 /t 2 3 . T J M - T C = P D M * Z θ J C( t ) 0 .1 10 100 D = 0 .5 0 .0 5 -1 0 .0 2 PDM 0 .0 1 JC (t), T h e rm a l R e s p o n s e Figure 9. Maximum Safe Operating Area 10 75 TC, Case Temperature [℃] t1 s in g le p u ls e Z θ t2 10 -2 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t1 , S q u a r e W a v e P u ls e D u r a tio n [s e c ] Figure 11. Transient Thermal Response Curve ©2001 Fairchild Semiconductor Corporation Rev. A1. May 2001 FQP30N06L Gate Charge Test Circuit & Waveform VGS Same Type as DUT 50KΩ Qg 200nF 12V 5V 300nF VDS VGS Qgs Qgd DUT 3mA Charge Resistive Switching Test Circuit & Waveforms VDS RL VDS 90% VDD VGS RG VGS DUT 5V 10% tr td(on) td(off) t on tf t off Unclamped Inductive Switching Test Circuit & Waveforms BVDSS 1 EAS = ---- L IAS2 -------------------2 BVDSS - VDD L VDS BVDSS IAS ID RG VDD DUT 10V tp ©2001 Fairchild Semiconductor Corporation ID (t) VDS (t) VDD tp Time Rev. A1. May 2001 FQP30N06L Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + VDS _ I SD L Driver RG VGS VGS ( Driver ) Same Type as DUT VDD • dv/dt controlled by RG • ISD controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current I SD ( DUT ) di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt VSD VDD Body Diode Forward Voltage Drop ©2001 Fairchild Semiconductor Corporation Rev. A1. May 2001 FQP30N06L Package Dimensions TO-220 4.50 ±0.20 2.80 ±0.10 (3.00) +0.10 1.30 –0.05 18.95MAX. (3.70) ø3.60 ±0.10 15.90 ±0.20 1.30 ±0.10 (8.70) (1.46) 9.20 ±0.20 (1.70) 9.90 ±0.20 1.52 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] 10.08 ±0.30 (1.00) 13.08 ±0.20 ) (45° 1.27 ±0.10 +0.10 0.50 –0.05 2.40 ±0.20 2.54TYP [2.54 ±0.20] 10.00 ±0.20 ©2001 Fairchild Semiconductor Corporation Rev. A1. May 2001 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™ FAST® FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SLIENT SWITCHER® SMART START™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ UltraFET® VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2001 Fairchild Semiconductor Corporation Rev. H2