FES16AT - FES16JT .412(10.5) MAX .185(4.70) .175(4.44) DIA .154(3.91) .148(3.74) .113(2.87) .103(2.62) Features .27(6.86) .23(5.84) PIN 1 + .594(15.1) .587(14.91) + • Low forward voltage drop. • High surge current capacity. • High current capability. • CASE PIN 2 - .055(1.40) .045(1.14) CASE Positive 1 2 .16(4.06) .14(3.56) .11(2.79) .10(2.54) PIN 1 + High reliability. .56(14.22) .53(13.46) PIN 2 + .037(0.94) .027(0.68) CASE Negative Suffix “R” TO-220AC Dimensions are in: inches (mm) .205(5.20) .195(4.95) .025(0.64) .014(0.35) 16 Ampere Glass Passivated Super Fast Rectifiers Absolute Maximum Ratings* Symbol IO TA = 25°C unless otherwise noted Parameter Value Units 16 A 250 A 7.81 62 16 W mW/°C °C/W 1.2 °C/W Storage Temperature Range -65 to +150 °C Operating Junction Temperature -65 to +150 °C RθJA Average Rectified Current .375 " lead length @ T A = 100°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient RθJL Thermal Resistance, Junction to Lead Tstg TJ if(surge) PD *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics TA = 25°C unless otherwise noted Parameter Device Units 16AT 16BT 16CT 16DT 16FT 16GT 16HT 16JT Peak Repetitive Reverse Voltage 50 100 150 200 300 400 500 600 V Maximum RMS Voltage 35 70 105 140 210 280 350 420 V 50 100 150 200 300 400 500 600 V DC Blocking Voltage (Rated VR) Maximum Reverse Current @ rated VR TA = 25°C TA = 100°C Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A Maximum Forward Voltage @ 16.0A Typical Junction Capacitance VR = 4.0. f = 1.0 MHz 1999 Fairchild Semiconductor Corporation µA µA 10 500 35 50 0.975 1.3 170 1.5 nS V 145 pF FES16AT - FES16JT, Rev. A FES16AT - FES16JT Discrete POWER & Signal Technologies FES16AT - FES16JT Typical Characteristics Forward Current Derating Curve FORWARD CURRENT (A) 16 12 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 8 4 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE (º C) 175 PEAK FORWARD SURGE CURRENT (A) Non-Repetitive Surge Current 20 250 200 150 100 50 0 1 Forward Characteristics 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 Reverse Characteristics 100 1000 REVERSE CURRENT ( µ A) FES16AT-FES16DT 10 FES16FT-FES16JT 1 0.1 TA = 25º C Pulse Width = 300µs 2% Duty Cycle 0.01 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 100 T A = 100 ºC 10 TA = 25º C 1 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 1.8 Junction Capacitance 300 250 CAPACITANCE (pF) FORWARD CURRENT (A) 2 200 150 FES16AT-FES16DT 100 FES16FT-FES16JT 50 0 50Ω NONINDUCTIVE 1 2 5 10 20 REVERSE VOLTAGE (V) 50Ω NONINDUCTIVE 50 +0.5A 100 trr (-) DUT 50V (approx) 50Ω NONINDUCTIVE Pulse Generator (Note 2) 0 -0.25A (+) OSCILLOSCOPE (Note 1) -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram FES16AT - FES16JT, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.