FIBERGLASS OMNIDIRECTIONAL ANTENNAS FG8063 FIBERGLASS BASE STATION ANTENNAS FEATURE INDUSTRY-LEADING DESIGN COMPONENTS THAT PERFORM IN EXTREME CONDITIONS Laird fiberglass base station antennas are collinear designs enclosed in a high density fiberglass, which is covered with a protective ultraviolet inhibiting coating. The radiating elements are made from high efficiency copper and are carefully phased to provide maximum gain in the horizontal plane. The mounting sleeves are tuned to eliminate RF currents from the transmission line, resulting in a “cold” sleeve allowing great freedom in mounting. This high quality and well-focused beam provides the highest gain and best efficiency. FEATURES AND BENEFITS: • Every FG fiberglass base antenna is tested on a network analyzer to assure the best performance. • Special UV Treated - stands up to the sun. • Durable gold anodized sleeve and cap with N Female connector. • Custom tuning available. • FedEx / UPS Shippable. Electrical APPLICATIONS: • Omnidirectional (circular) outdoor antenna applications used by private organizations and government agencies around the globe. • Typical applications include land based and marine radio and data transmissions for public safety agencies, commercial organizations, and the military. Mechanical Frequency Range 806 – 866 MHz Height 23-3/8” VSWR < 2:1 Max Diameter 1.310” Nominal Gain 3 dBd Weight < 1 lbs Maximum Power 200 W Rated Wind Velocity 125 mph (210 kph) Nominal Impedance 50 Ω Polarization Vertical Rated Wind Velocity (with 0.5” radial ice) 85 mph (137 kph) Pattern Omnidirectional 57 lbs (26 kg) Half-Power Beamwidth (Elevation° x Azimuth°) Lateral Thrust @ 125mph wind velocity 70° x 360° Wind Resistance 0.2104 sq. ft. Coaxial Cable Length & Type None Mounting Information FM2 Mounting Kit (Sold separately) Termination N Female connector Lightning Protection Lightning Arrestor LABH350NN (Sold separately) RADIATION PATTERNS Americas: +1.847 839.6925 [email protected] Europe: +44.1628.858941 [email protected] Asia: [email protected] www.lairdtech.com elevation Pattern (Y, Z, or H-plane) azimuthal Pattern (Y, Z, or e-plane) ANT-DS-FG8063 0616 Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2016 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trade marks or registered trade marks of Laird Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.