POWER LINE CHOKE (DRUM CORE STYLE) Electrical Specifications at 25OC Parameter Min. Typ. Max. Units Inductance 8.0 10 12 µH IMAX 1 Working voltage 2000 volts typ. Isolation 2000 Vrms, from core to winding. 25 A 8.5 mΩ .0508 (1.29) inches (mm) DCR Lead Diameter Custom Specifications: Part wound using wire with teflon sleaving. Bottom of part insulated with mylar tape rated at 6500 Volts. Test Conditions: Inductance tested at 100 mVRMS and 300 kHz 1. Current for 10% drop in Inductance Finish with a shrink tubing. PHYSICAL DIMENSIONS All dimensions in inches D C Dim. B .750" TYP. A B C D inches 1.390 1.010 0.315 0.190 High Saturation Pre-Tinned Leads Center hole for mechanical mounting A Leads are .0508 (# 16 AWG) Leads tinned to within 1/8" of body. RHOMBUS P/N: CUST P/N: DATE: 12/20/01 Rhombus Industries Inc. Transformers & Magnetic Products www.rhombus-ind.com L-733 NAME: SHEET: 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 FAX: (714) 896-0971