D2UB05~ D2UB100 Voltage 50V ~ 1000V 2.0Amp Glass Passivated Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free D3K FEATURES Io : 2A VRRM : 50~1000V Glass passivated chip High surge forward current capability APPLICATIONS General purpose 1 phase Bridge rectifier applications Millimeter Min. Max. 13.3 14.3 10.3 11.3 6.4 7.4 4.5 5.5 1.05 1.45 0.60 0.85 REF. A B C D E F REF. G H J K L M Millimeter Min. Max. 13.1 13.5 3.7 3.9 2.0 2.2 0.4 0.6 2.6 3.6 3.1 3.4 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise s pecified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Maximum Recurrent Peak Reverse Voltage Average Rectified Output Current @ 60Hz sine wave, R-load Without heatsink TA=29°C With heatsink Tc =140°C Surge(Non- repetitive)Forward Current @ 60HZ sine wave, 1 cycle, TJ=25°C Symbol VRRM D2UB 05 D2UB 10 D2UB 20 D2UB 40 D2UB 60 D2UB 80 D2UB 100 50 100 200 400 600 800 1000 Unit V 1.2 IO A 2.0 IFSM 60 A It 2 15 AS Dielectric Strength@ Terminals to case，AC 1 minute VDIS 2 KV Mounting Torque@ Recommend torque： 5kg.cm Tor 8 Kg.cm Peak Forward Voltage@ IFM=1.0A, Pulse measurement, Rating of per diode VFM 1.05 V Peak Reverse Current@ VRM=VRRM , Pulse measurement, Rating of per diode IRRM 10 µA Without heatsink RθJA 55 With heatsink RθJC 1.5 TJ,TSTG -55~+150 Current Squared Time Thermal Resistance 1 Junction and Storage temperature range 2 °C / W °C Notes： 1. 1ms≤t<8.3ms TJ=25°C ，Rating of per diode http://www.SeCoSGmbH.com/ 29-Jun-2015 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 D2UB05~ D2UB100 Elektronische Bauelemente Voltage 50V ~ 1000V 2.0Amp Glass Passivated Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 29-Jun-2015 Rev. A Any changes of specification will not be informed individually. Page 2 of 2