Bi MHP140500F 140w to-247 high power resistor Datasheet

140W TO-247 HIGH POWER RESISTORS
Features………………………………………………………….
ƒ
ƒ
ƒ
ƒ
Non-inductive, high power resistor.
Thermally enhanced Industry standard TO-247 package.
Extremely Low thermal resistance, 0.9 °C/W resistor hot spot to metal tab.
Complete thermal flow design available for easy implementation.
Small thin package for high density PCB installation.
RoHS compliant.
ƒ
ƒ
Applications………………………………………………………
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
High frequency circuits and RF power amplifiers.
UPS and power supply circuits
Motor control and power/RF power amplifiers.
Industrial power equipment.
PLC drivers.
Inrush current protection.
Specification
Dimensions (mm)
Structure and Material
dia.3.2
Epoxy Molding
Copper Wire Leads
Conductor
Resistor Film
Alumina
Copper Plate
20
MHP 140
100F
5.1
4.8
16.0
3+/-0.3
dia.0.8
10.9 14.5 +/-0.5
Items
Specification
Power Rating
Conditions
@ Tab Temp < 25°C
140 Watts
Power Rating
Free air.
5.0 Watts
Resistance Range
0.01-0.09 Ω
0.1-9.1 Ω
10-220 Ω
Extended resistance range to 51KΩ avail.
Nominal Resistance Series
E6
250 ppm/°C
E12
100 ppm/°C
E24
50 ppm/°C
For -55 to +155°C
5% and 1%
1%
TCR
Tolerance
Operation Temp. Range
Rated Voltage (Max).
Dielectric Withstanding Voltage
5%
2.0 Ω and 5.0 Ω also available.
-55 - +155 °C
700V or √(P*R)
2500 Volt
60 seconds.
Load Life
∆R +/- (1.0 %+0.05 Ω)
25°C, 90 min. ON, 30 min.OFF, 1000 hours.
Humidity
∆R +/- (1.0 %+0.05 Ω)
40°C, 90-95% RH, DC 0.1W, 1000 hours.
Temperature Cycle
∆R +/- (0.25 %+0.05 Ω)
-55°C, 30 min.,+155°C 30min., 5cycles.
Soldering Heat (Max)
∆R +/- (0.25 %+0.05 Ω)
250+/-5°C, 3 seconds,
Min 95% coverage
230+/-5°C, 3 seconds.
Solderability
Insulation Resistance
Vibration
Over 1000 MΩ
Between terminals and metal back plate.
∆R +/- (0.25 %+0.05 Ω)
Specifications subject to change without notice.
Notes:
1. Electrically isolated metal tab.
2. Recommend the use of thermal grease between metal tab and heat sink.
3. Thermal design should account for a thermal resistance between resistor and tab of 0.9°C/W and a maximum resistor temperature of
155°C.
4. Resistances greater than 220Ω are available, please call factory.
5. Current rating: 25A maximum.
1
MHP 140
140W TO-247 HIGH POWER RESISTORS
Derating Curve
Temperature Rise
Power rating (Watts)
140
120
150
25°C
80
100
60
75
40
50
20
25
0
MHP140 1R5J
100
125
+155°C
-50
0
50
100
150
Flange Temperature (°C)
0
0
200
25
50
75
100
125
150
100M
1G
Power (Watts)
Pulse Energy Durability
Frequency Characteristics
Pulse Peak (Watts)
Impedance (Ω)
100K
1K
MHP140 0R200 to MHP140 100 F
10K
100
MHP140 100 F
1K
10
100
1
100n
1u
10u
100u
1m
10m
10K
Pulse Width (seconds)
100K
1M
Mounting Recommendations
Sufficient torque must be used to obtain optimum heat transfer.
Ordering Information
MHP 140
500
F
Model
Resistance Code
0.1Ω : 0R100
50 Ω : 500 First two digits significant, last digit: number of trailing zeros
2
10M
Frequency (Hz)
Tolerance
J = 5% Tol
F = 1% Tol