SAW Components Datasheet B9003 SAW Components B9003 836,5 MHz Low-Loss Filter for Mobile Communication Datasheet Chip sized SAW package DCS4G Features ● ● ● ● 2 1 tem, transmit path High counterband suppression Usable passband 25 MHz Unbalanced/unbalanced operation Package size: 1.6 mm x 2.0 mm (4 pin, diagonal pinning) 4 0,5 0,075 ● Low-loss RF filter for Cell mobile telephone sys- bottom view 0,68 0,075 side view 3 0,55 Terminals ● Ni, gold-plated 1,6 2,0 top view Dimensions in mm, approx weight 0,007g Pin configuration 1 Input 3 Output 2,4 Ground 1 3 4 2 Type Ordering code Marking and Package according to Packing according to B9003 B39841-B9003-E910 C61157-A7-A105 F61074-V8152-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage ESD voltage Source Power max. 824 - 849 MHz elsewhere T Tstg VDC VESD* PIN PIN – 30 /+ 85 – 40 /+ 85 3 100* 16 10 ˚C ˚C V V dBm dBm machine model, 10 pulses source impedance 50 Ω source impedance 50 Ω * acc. to JESD22-A115A (Machine Model), 10 negative & 10 positive pulses 2 March 25, 2004 SAW Components B9003 836,5 MHz Low-Loss Filter for Mobile Communication Datasheet Characteristics T = +25 ˚C ZS = 50 Ω ZL = 50 Ω Operating temperature range: Terminating source impedance: Terminating load impedance: Center frequency fC Maximum insertion attenuation 824,0 ... 849,0 MHz αmax Ripple p-p 824,0 ... 849,0 MHz Input return loss @ 50 Ohm 824,0 ... 849,0 MHz Output return loss @ 50 Ohm 824,0 ... 849,0 MHz min. typ. max. — 836,5 — — 1,9 2,1 dB — 0,9 1,1 dB MHz 10 12 --- dB 10 12 --- dB 33 38 40 33 33 30 36 43 43 37 44 37 — — — — — — dB dB dB dB dB dB α Attenuation 0,0 779,0 869,0 894,0 1580,0 1698,0 ... 779,0 ... 804,0 ... 894,0 ...1580,0 ...1698,0 ...2547,0 MHz MHz MHz MHz MHz MHz 3 March 25, 2004 SAW Components B9003 836,5 MHz Low-Loss Filter for Mobile Communication Datasheet Characteristics T = -30 to +85 ˚C ZS = 50 Ω ZL = 50 Ω Operating temperature range: Terminating source impedance: Terminating load impedance: Center frequency fC Maximum insertion attenuation 824,0 ... 849,0 MHz αmax Ripple p-p 824,0 ... 849,0 MHz Input return loss @ 50 Ohm 824,0 ... 849,0 MHz Output return loss @ 50 Ohm 824,0 ... 849,0 MHz min. typ. max. — 836,5 — — 2,2 2,5 dB — 1,1 1,5 dB 10 11,5 --- dB 10 11,5 --- dB 33 38 40 33 33 30 36 43 43 37 44 37 — — — — — — dB dB dB dB dB dB MHz α Attenuation 0,0 779,0 869,0 894,0 1580,0 1698,0 ... 779,0 ... 804,0 ... 894,0 ...1580,0 ...1698,0 ...2547,0 MHz MHz MHz MHz MHz MHz 4 March 25, 2004 SAW Components B9003 836,5 MHz Low-Loss Filter for Mobile Communication Datasheet Transfer function 5 March 25, 2004 SAW Components B9003 836,5 MHz Low-Loss Filter for Mobile Communication Datasheet Input and Output Return Loss 6 March 25, 2004 SAW Components B9003 836,5 MHz Low-Loss Filter for Mobile Communication Datasheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC WT P.O. Box 80 17 09, D-81617 München EPCOS AG 2004. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 7 March 25, 2004