FM1020-T1 thru FM1040-T1 SILICON EPITAXIAL PLANCE TYPE SMC-T1 0.283(7.2) 0.260(6.6) 0.012(0.3) Typ . 0.189(4.8) 0.165(4.2) 0.152(3.8 ) 0.144(3.6 ) 0.224(5.6) 0.208(5.2) 0.098(2.5) 0.075(1.9) 0.032(0.8 ) Typ . 0.040(1.0 ) Typ . 0.040(1.0 ) Typ . Dimensions in inches and (millimeters) FEATURES MECHANICAL DATA Plastic package has Underwriters Laboratory Flammability classification 94V-0 Utilizing Fame Retardant Epoxy Molding Compound For surface mount applications Exceeds environmental standards of MIL-S-19500/228 Low leakage current. Case Molded plastic, DO-214AB/SMC-T1 Terminals Solder plated, solderable per MIL-STD-750, Method 2026 Polarity Indicated by cathode band Mounting Position Any Weight 0.195grams MAXIMUM RATINGS (at TA=25 C unless otherwise noted) o PARAMETER CONDITIONS SYMBOL Forward rectified current See Fig.1 Forward surge current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Reverse current Thermal resistance Max. UNITS 10 A IFSM 150 A 0.5 mA VR=VRRM TA=250C IR 0 VR=VRRM TA=100 C Junction to ambient Diode junction capacitance F=1MHZ and applied 4vDC reverse voltage Storage temperature MARKING CODE VRRM (V) FM1020-T1 SS102 20 FM1030-T1 SS103 FM1040-T1 SS104 *1 50 RJA 55 CJ 700 TSTG SYMBOLS VRMS (V) *2 -55 *3 VR (V) 14 20 30 21 30 40 28 40 *1 Repetitive peak reverse peak reverse *2 RMS voltage *3 Continuous reverse voltage *4 Maximum forward voltage www.paceleader.tw Typ. IO Min. 1 C/W pF +150 *4 mA 0 0 C VF (V) Operating Temperature (0C) 0.55 -55 to + 125 FM1020-T1 thru FM1040-T1 SILICON EPITAXIAL PLANCE TYPE RATING AND CHARACTERISTICS CURVES FM1020-T1 THRU FM1040-T1 www.paceleader.tw 2