K500F Series 8 pin DIP, 5.0 Volt, CMOS/TTL, Clock Oscillator K500F Series THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE MH PRODUCT SERIES. 5V Crystal Clock Oscillators 4-pin Package, Compatible with 8-pin DIL 1.5MHz to 100MHz Frequency Range TTL/CMOS Compatible Tight Symmetry (45/55%) Available Tri-State Option Available ±100ppm Stability Standard - K1100FC Tighter Stabilities Available ��� ��� ��� � � � � � ������������������ � ������� �� ��� ��� � � �� �� �� �� � � ��� ±25ppm Stability:- K1100FA ±50ppm Stability:- K1100FB ����� Case Ground for EMI Protection E L E C T R I C A L S P E C I F I C AT I O N S MODEL K500FA K500FB Frequency Range (MHz) K500FC 1.5 to 125 Frequency Stability (ppm) Overall Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0°C to 70°C ±25 ±50 ±100 -40°C to 85°C N/A ±50 ±100 Temperature Range (°C) Operating -40°C to +85°C Storage -55°C to +125°C Supply Voltage (V) +5.0 ±5% Supply Current (mA) <30 Output TTL/CMOS “0” Level (VOL) 0.9 VCC “1” Level (VOH) 0.1 VCC Load Up to 80MHz 50pF; >80MHz 30pF TR & TF (ns) <10 Symmetry (%) 40/60 Jitter (Typical) 10ps RMS @ 90MHz Start up Time (ms) <10 PA R T N U M B E R I N G G U I D E K500FXXXX - Specify Frequency “Blank” = Fixed Frequency “E” = Tri-State “Blank” = 0oC to 70oC Operating Temperature “M” = -40oC to 85oC Operating Temperature “Blank” = 40/60% Symmetry “S” = 45/55 Symmetry “A” ±25ppm Frequency Stability (Available 0/70oC only) “B” = ±50 ppm Frequency Stability “C” = ±100ppm Frequency Stability MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com 1 Revision: 03-01-07 K500F Series K500F Series K500F Series 8 pin DIP, 5.0 Volt, CMOS/TTL, Clock Oscillator 5V Crystal Clock Oscillators THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE MH PRODUCT SERIES. 5V Crystal Clock Oscillators PIN FUNCTION 1PIN FUNCTION N/C / Tri-State 21 N/C / Tri-State Ground 32 Output Ground + Output VCC 43 4 + VCC SHIPPING TUBE CROSS SECTION SHIPPING TUBE CROSS SECTION TEST CIRCUIT DIAGRAM TEST CIRCUIT DIAGRAM OUTPUT WAVEFORM OUTPUT WAVEFORM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS TEST METHODS REFERENCE PROCEDURES REFERENCE PROCEDURES DESCRIPTION DESCRIPTION -55°C to +125°C; Air-to-Air; 100 cycles; 10 Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Temperature Cycle Mechanical Shock MIL-STD-833, Mtd 1010, Cond. B MIL-STD-883, Mtd 2002, Cond. B min. dwell -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell 1500 g’s Mechanical Shock Vibration MIL-STD-883, Mtd2007, 2002,Cond. Cond.BB MIL-STD 883, Mtd 1500 g’sHz; 0.06 inch; 15g’s; 3 planes 20-2000 VibrationSteady State Humidity MIL-STD 883,Mtd Mtd103 2007, Cond. B MIL-STD-202, 20-2000 Hz; 0.06 inch; 40°C; 90%-95% R.H.; 5615g’s; days 3 planes HumidityShock Steady State Thermal MIL-STD-202,Mtd Mtd1011.7 103 Cond. B MIL-STD-883, 40°C;to 90%-95% R.H.; 56 days15 cycles 100°C 0°C; Water-to-Water; Thermal Shock Electrostatic Discharge MIL-STD-883,Mtd Mtd3015 1011.7 Cond. MIL-STD-883, Class II B toKV 0°C; Water-to-Water; 15 cycles 2100°C KV to 4 Threshold Electrostatic Discharge Solderability Hermeticity Solderability MIL-STD-883,Mtd Mtd2022.2 3015 Class II MIL-STD-883, MIL-STD-883, MIL-STD-883,Mtd Mtd1014.8, 2022.2Cond. A1 2 KV to 4 KV Threshold Criteria Solder dip; Meniscograph Mass spectro. 2 x 10-8 atmos. CC/sec He Solder dip; Meniscograph Criteria MIL-STD-883,Mtd Mtd210D, 1014.8, Cond. Mass spectro. 2 x 10-8 atmos. CC/sec He Hermeticityto Soldering MIL-STD-202, Cond. J A1 235°C; 30 seconds Resistance tension & bend stress Lead Integrityto Soldering MIL-STD-883, MIL-STD-202,Mtd Mtd2004.5, 210D, Cond. JA, B1 Lead 235°C; 30 seconds Resistance MIL-STD-883,Mtd Mtd2015.8 2004.5, Cond. A, B1 Resistance Lead tension & bend stress Lead Integrity MIL-STD-883, to solvents Marking Permanence Life Test Permanence Marking Resistance to solvents 125 °C, powered, 1000 hours minimum MIL-STD-883, MIL-STD-883,Mtd Mtd1005.6 2015.8 MtronPTI to the product(s) and service(s) described herein without notice. liability is assumed as a result of their use or application. MIL-STD-883, Mtd 1005.6 Lifereserves Test the right to make changes 125 °C,Nopowered, 1000 hours minimum 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 800-888-1499 or www.champtech.com 800-888-1499 or www.champtech.com 2 Revision: 03-01-07