MM5369 17 Stage Oscillator/Divider General Description Features The MM5369 is a CMOS integrated circuit with 17 binary divider stages that can be used to generate a precise reference from commonly available high frequency quartz crystals. An internal pulse is generated by mask programming the combinations of stages 1 through 4, 16 and 17 to set or reset the individual stages. The MM5369 is advanced one count on the positive transition of each clock pulse. Two buffered outputs are available: the cyrstal frequency for tuning purposes and the 17th stage output. The MM5369 is available in an 8-lead dual-in-line epoxy package. Y Y Y Y Y Y Y Y Crystal oscillator Two buffered outputs Output 1 crystal frequency Output 2 full division High speed (4 MHz at VDD e 10V) Wide supply range 3V – 15V Low power Fully static operation 8-lead dual-in-line package Low Current Option Y MM5369AA 3.58 MHz to 60 Hz Connection and Block Diagrams Dual-In-Line Package TL/F/10820 – 2 FIGURE 2 TL/F/10820–1 Top View Order Number MM5369AA/N See NS Package Number N08E TL/F/10820 – 8 Order Number MM5369AA/M See NS Package Number M14A C1996 National Semiconductor Corporation TL/F/10820 RRD-B30M66/Printed in U. S. A. MM5369 17 Stage Oscillator/Divider February 1995 Absolute Maximum Ratings Package Dissipation If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Voltage at Any Pin 16V Operating VCC Range Lead Temperature (Soldering, 10 seconds) b 0.3V to VDD a 0.3V Operating Temperature Storage Temperature 500 mW Maximum VCC Voltage 0§ C to a 70§ C 3V to 15V 300§ C b 65§ C to a 150§ C Electrical Characteristics TA within operating temperature range, VSS e GND, 3V s VDD s 15V unless otherwise specified. Parameter Conditions Min Quiescent Current Drain VDD e 15V Operating Current Drain VDD e 10V, fIN e 4.19 MHz Frequency of Oscillation VDD e 10V VDD e 6V Output Current Levels VDD e 10V VO e 5V DC DC Logical ‘‘1’’ Source Logical ‘‘0’’ Sink Output Voltage Levels Typ Max 10 mA 1.2 2.5 mA 4.5 2 MHz MHz 500 500 Units mA mA VDD e 10V IO e 10 mA Logical ‘‘1’’ Logical ‘‘0’’ 9.0 1.0 V V Note: For 3.58 MHz operation, VDD must be t 10V. Functional Description A connection diagram for the MM5369 is shown in Figure 1 and a block diagram is shown in Figure 2. DIVIDER A pulse is genertaed when divider stages 1 through 4, 16 and 17 are in the correct state. By mask options, this pulse is used to set or reset individual stages of the counter. Figure 4 shows the relationship between the duty cycle and the programmed modulus. TIME BASE A precision time base is provided by the interconnection of a 3,579,545 Hz quartz crystal and the RC network shown in Figure 3 together with the CMOS inverter/amplifier provided between the OSC IN and the OSC OUT terminals. Resistor R1 is necessary to bias the inverter for class A amplifier operation. Capacitors C1 and C2 in series provide the parallel load capacitance required for precise tuning of the quartz crystal. The network shown provides l 100 ppm tuning range when used with standard crystals trimmed for CL e 12 pF. Tuning to better than g 2 ppm is easily obtainable. http://www.national.com OUTPUTS The Tuner Output is a buffered output at the crystal oscillator frequency. This output is provided so that the crystal frequency can be obtained without disturbing the crystal oscillator. The Divide Output is the input frequency divided by the mask programmed number. Both outputs are push-pull outputs. 2 Functional Description (Continued) TL/F/10820 – 3 *To be selected based on xtal used FIGURE 3. Crystal Oscillator Network TL/F/10820 – 4 FIGURE 4. Plot of Divide-By vs Duty Cycle TL/F/10820 – 6 FIGURE 6. Output Waveform for the MM5369AA TL/F/10820 – 5 FIGURE 5. Typical Current Drain vs Oscillator Frequency 3 http://www.national.com http://www.national.com 4 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead (0.150× Wide) Molded Small Outline Package (M) Order Number MM5369AA/M NS Package Number M14A 5 http://www.national.com MM5369 17 Stage Oscillator/Divider Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 8-Lead Molded Dual-In-Line Package (N) Order Number MM5369N NS Package Number N08E LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 http://www.national.com 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: a49 (0) 180-530 85 86 Email: europe.support @ nsc.com Deutsch Tel: a49 (0) 180-530 85 85 English Tel: a49 (0) 180-532 78 32 Fran3ais Tel: a49 (0) 180-532 93 58 Italiano Tel: a49 (0) 180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2308 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.