SMD Power Inductor CDMPIH58D28 Description • Ferrite core construction. • Magnetically shielded. • Lower flux leakage. • L W H: 6.0 6.0 3.2 mm Max. • Product weight:0.4g (Ref.) • Moisture Sensitivity Level: 1 • RoHS compliance. • Halogen Free available. RoHS × × Halogen Free Dimension - [mm] × × Environmental Data • Operating temperature range: -40 +105 (including coil’s self temperature rise) • Storage temperature range: -40 +105 • Solder reflow temperature: 260 peak. ℃~ ℃ ℃~ ℃ ℃ Packaging • Carrier tape and reel packaging. • 13.0”diameter reel • 2000pcs per reel Land pattern and Schematics - [mm] Applications • Ideally used in Single-lens reflex cameras or other consumer electronics. Electrical Characteristics Part No. Stamp CDMPIH58D28NP-151MC E CDMPIH58D28NP-221MC G CDMPIH58D28NP-331MC J CDMPIH58D28NP-471MC L CDMPIH58D28NP-681MC N CDMPIH58D28NP-102MC Q CDMPIH58D28NP-152MC S CDMPIH58D28NP-222MC U μ ※ 150μH±20% 220μH±20% 330μH±20% 470μH±20% 680μH±20% 1000μH±20% 1500μH±20% 2200μH±20% Inductance ( H) [Within] 1 Ω ℃ D.C.R.( ) [Within] (at 20 ) Saturation current 2 (mA)※ (at 20℃) (at 105℃) Temperature rise Current ( ) 3 mA ※ 1.06(0.85) 330 240 440 1.50(1.20) 270 190 380 2.10(1.70) 230 170 330 3.00(2.40) 190 140 260 4.40(3.50) 160 120 230 6.60(5.30) 130 100 180 10.2(8.3) 100 80 140 16.5(13.2) 85 65 120 ※1. Measuring condition: at 1kHz. ※2. Saturation current: The value of D.C. current when the inductance decreases to 65% of it’s nominal value. ※3. Temperature rise current: The value of D.C. current when the temperature rise is △t=40℃(Ta=20℃). Page 1 of 3 Revised: 19-Dec-13 SMD Power Inductor CDMPIH58D28 Saturation Current & Temperature Rise Graph ℃ L (20 ) μ ℃ △T L (105 ) △ ℃ μ 1. CDMPIH58D28NP-151MC L ( H) T( ) L ( H) 180 60 300 150 50 120 △T (℃) 2. CDMPIH58D28NP-221MC μ L ( H) △T (℃) 3. CDMPIH58D28NP-331MC 60 420 250 50 350 50 40 200 40 280 40 90 30 150 30 210 30 60 20 100 20 140 20 30 10 50 10 70 10 0 0 0 0 0 0.0 0.1 0.2 0.3 DC (A) 0.4 μ 0.5 0.0 △ ℃ μ 4. CDMPIH58D28NP-471MC T( ) L ( H) L ( H) 600 60 900 500 50 400 0.1 0.2 DC (A) 0.3 0.4 △T (℃) 5. CDMPIH58D28NP-681MC 60 0 0.00 0.07 0.14 0.21 0.28 0.35 DC (A) μ L ( H) △T (℃) 6. CDMPIH58D28NP-102MC 60 1200 750 50 1000 50 40 600 40 800 40 300 30 450 30 600 30 200 20 300 20 400 20 100 10 150 10 200 10 0 0.00 μ 0.07 0.14 DC (A) 0.21 0 0.28 △ ℃ 0 0.00 μ 0.06 0.12 DC (A) 0.18 △T (℃) 7. CDMPIH58D28NP-152MC L ( H) T( ) L ( H) 1800 60 3000 1500 50 2500 50 1200 40 2000 40 900 30 1500 30 600 20 1000 20 300 10 500 10 0 0.00 0.04 0.08 DC (A) 0.12 0 0.16 8. CDMPIH58D28NP-222MC 0 0.24 0 0.00 0 0.00 60 0.05 0.10 0.15 DC (A) 60 0.04 0.08 DC (A) 0.12 Page 2 of 3 0 0.16 Revised: 19-Dec-13 0 0.20 SMD Power Inductor CDMPIH58D28 Solder Reflow Condition T (℃) 300 250 Heat Endurance 260℃ 230℃ 200 0 60 120 180 240 245℃ PEAK T (s) 40s ± ℃,60~120s 170 10 100 300 ℃ 230 150 60 100 Temperature Chart 200 10 150 50 0 T (℃) 300 250 50 0 0 60 120 180 240 300 T (s) Please refer to the sales offices on our website - http://www.sumida.com Hong Kong Shanghai Shenzhen Taipei Tel.+852-2880-6781 FAX.+852-2565-9600 [email protected] Tel.+86-21-5836-3299 FAX.+86-21-5836-3266 [email protected] Tel.+86-755-8291-0228 FAX.+86-755-8291-0338 [email protected] Tel.+886-2-8751-2737 FAX.+886-2-8751-2738 [email protected] Saitama(Japan) Seoul Singapore San Jose Tel.+81-48-691-7300 FAX.+81-48-691-7340 [email protected] Tel.+82-2-6237-0777 FAX.+82-2-6237-0778 [email protected] Tel.+65-6296-3388 FAX.+65-6841-4426 [email protected] Tel.+1-408-321-9660 FAX.+1-408-321-9308 [email protected] Chicago Obernzell Neumarkt Tel.+1-847-545-6700 FAX. +1-847-545-6720 [email protected] Tel.+49-8591-937-0 FAX. +49-8591-937-103 [email protected] Tel.+49-9181-4509-110 FAX. +49-9181-4509-310 [email protected] Page 3 of 3 Revised: 19-Dec-13