BTCPOWER BSIP10-12-330 10a sip & smt 12v input dc-dc converter Datasheet

BTCPower
TM
Broadband TelCom Power, Inc.
Redefining “Current” Limits In Power Conversion
BSIP10-12
BSMT10-12 Series
10A SIP & SMT 12V Input DC-DC Converters
Features
•
•
•
•
•
•
•
•
•
Industry standard pin out
High efficiency to 95%
300KHz switching frequency
9.0 – 14 Vdc input range
Over temperature protection
Continuous short circuit protection
Remote On/Off
Cost efficient open frame design
UL / cUL 60950 certified
Model
Number
Input
Voltage
Output
Voltage
Output
Current
Input Current
No Load
Full Load
% Efficiency
BSIP10-12-100 / BSMT10-12-100
9.0 -14 Vdc
1.0 Vdc
10A
50 mA
992 mA
84
BSIP10-12-120 / BSMT10-12-120
9.0 -14 Vdc
1.2 Vdc
10A
50 mA
1163 mA
86
BSIP10-12-150 / BSMT10-12-150
BSIP10-12-180 / BSMT10-12-180
9.0 -14 Vdc
9.0 -14 Vdc
1.5 Vdc
1.8 Vdc
10A
10A
50 mA
60 mA
1404 mA
1666 mA
89
90
BSIP10-12-200 / BSMT10-12-200
9.0 -14 Vdc
2.0 Bdc
10A
60 mA
1832 mA
91
BSIP10-12-250 / BSMT10-12-250
9.0 -14 Vdc
2.5 Vdc
10A
60 mA
2264 mA
92
BSIP10-12-330 / BSMT10-12-330
9.0 -14 Vdc
3.3 Vdc
10A
70 mA
2956 mA
93
BSIP10-12-500 / BSMT10-12-500
9.0 -14 Vdc
5.0 Vdc
10A
70 mA
4385 mA
95
BSIP10-12-500A / BSMT10-12-500A
8.3 -14 Vdc
0.75-5.0 Vdc
10A
70 mA
2956 mA
93% @ 3.3Vo
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP10-12 Rev1 10-26-04
BSIP10-12 Series
10A SIP&SMT 12Vi DC-DC Converters
BTCPower
TM
Specifications
Input Specifications:
Input Voltage Range…………….………12V………………... 9.0-14V
Under voltage lock-out ………………power up ……………8.0V Typ.
Power down ………..7.7V Typ.
Input Filter……………………………………………………Capacitive
Positive remove on /off control:
Module On …………………………Open circuit or =Vin
Over temperature protection ………………….………….. 120 ºC Typ.
Operating Temperature Range…………………………-40ºC ~ +85ºC
Power derating curve …………………………………….. see fig. 1,2.
Storage Temperature Range……………………..…..-55 ºC ~ +125ºC
Dimensions:
SIP package: 2.0” x 0.512” x 0.327“ (50.8 x 13.0 x 8.3 mm)
Module Off …………………………………….. < 0.4Vdc
Output Specifications:
Voltage Accuracy…………….. ………………………….+/- 1.5 % max.
Transient response : 25% step load change ……………< 200 u sec.
Ripple & Noise, 20 MHz BW (note3)………………….50 mV p-p max.
5Vo ………………………………...75 mV p-p max.
Temperature Coeffcient………………………… +/- 0.03 % / ºC max.
Short Circuit Protection………………………………..……Continuous
Line Regulation (note1) ………………………….……..+/- 0.2 % max.
Load Regulation (note2) …… …………….…….….….+/- 0.5 % max.
Capacitive load, low ESR…………………………………8000uF max.
General Specifications:
SMT package: 1.3” x 0.53” x 0.366” (33.0 x 12.46 x 9.3 mm)
Structure …………………………..Non-potted with open frame type
Note:
1.
Measured from high line to low line;
2.
Measured from full load to zero load;
3.
Measured with 10uF tantalum capacitor and 1 uF ceramic
capacitor across output
4.
The input terminal recommend to parallel with 100uF
capacitor ESR < 20 mohm
5.
Suffix “N” to the model number with Negative logic remote
Model On: Open circuit or < 0.4Vdc
Model Off: > +2.8Vdc to Vin
Efficiency………………………………………………..……...see table
Isolation Resistance………………………………………Non-isolation
Switching Frequency……………………………………..300 KHz, Typ.
Outline Information and Pin-out
SMT Outline information
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP10-12 Rev1 10-26-04
BSIP10-12 Series
10A SIP&SMT 12Vi DC-DC Converters
BTCPower
SIP Outline Inforamtion
Dimensions are in Inches (millimeters)
Tolerances: .XX ± 0.2” (.X ±0.5), unless otherwise noted
.XXX ±0.01” (.XX ±0.25)
PIN CONNECTION
Pin
Function
1
+ Output
2
+ Output
3
+ Sense
4
+ Output
5
Common
6
Common
7
+ V Input
8
+ V Input
9
No Pin
10
Trim
11
On / Off Control
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP10-12 Rev1 10-26-04
TM
BSIP10-12 Series
BTCPower
10A SIP&SMT 12Vi DC-DC Converters
TM
Product Brief
Temperature Typical Derating Curve
Fig 1.: Typical Derating Curve of BSIP10-12 series
Fig 2.: Typical Derating Curve of BSMT10-12 series
Trim Resistor Values
Vo (set) (V)
Rtrim (Kohm)
0.75
Open
1.2
22.33
1.5
13
1.8
9
2
7.4
2.5
5
3.3
3.12
3.63
1.47
Fig 3.: Simplified Schematic
The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are
subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines.
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840• www.btcpower.com • Email: [email protected] DS BSIP10-12 Rev1 10-26-04
Similar pages