Power Inductors - Shielded CTFP3 Series SPECIFICATIONS Parts numbers indicate tolerance available. M = ±20%, N = ±30% CTFP3F Please specify “F” for RoHS compliant. *Irate DC current rating at 40°C temperature rise(typical) **Imax DC current rating at 80°C temperatre rise(typical) From .10 µH to 1.3 µH Not shown at actual size. RoHS ctparts.com Part Number Inductance (µH) *Irate (A) ∆L/L0 @Irate **Imax (A) DCR Max. Ω) (mΩ Height C (mm) CTFP3_-R10N CTFP3_-R22N CTFP3_-R39N CTFP3_-R62M .10 .22 .39 .62 25.5 22.0 19.0 11.0 ≤20% ≤25% ≤30% ≤25% 32 28 23 15 1.5 2.0 23 9.7 3.4±0.3 3.5±0.3 3.5±0.3 3.2±0.3 CTFP3_-1R0M CTFP3_-1R3M 1.0 1.3 10.5 9.5 ≤30% ≤30% 13.5 12 11.0 12.2 3.3±0.3 3.3±0.3 Compliant Available PHYSICAL DIMENSIONS Size A mm inches 7.4±0.3 6.7±0.3 See 1.27±0.15 3.0±0.5 0.291±0.01 0.264±0.01 Ordering Info 0.05±0.006 0.118±0.02 Inductance Code CHARACTERISTICS Description: SMD low profile high current inductors Applications: Excellent for power line DC/DC conversion applications used in notebook computers and other handheld equipment. Operating Temperature: -25°C to +125°C Inductance Tolerance: ±20%, ±30% Testing: Inductance and Q tested on an HP4285A at 100kHz, 250mV. Packaging: Tape & Reel Miscellaneous: RoHS Compliant available. Marking: Parts are marked with inductance code & date code Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. B B C D C A D XXX yyww E Date Code Epoxy PAD LAYOUT Unit: mm 2.5 4.0 2.5 3.8 Technologies 08.23.05 CENTRAL E Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice