Bulletin PD -2.601 rev. A 11/00 HFA08TA60C HEXFRED Ultrafast, Soft Recovery Diode TM 2 Features • • • • • VR = 600V Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Benefits • Reduced RFI and EMI • Reduced Power Loss in Diode and Switching Transistor • Higher Frequency Operation • Reduced Snubbing • Reduced Parts Count VF = 1.8V Qrr * = 40nC 1 di(rec)M/dt * = 280A/µs * 125°C 3 Description International Rectifier's HFA08TA60C is a state of the art center tap ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 4 amps per Leg continuous current, the HFA08TA60C is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA08TA60C is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. TO-220AB Absolute Maximum Ratings Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max Units 600 4.0 25 16 25 10 V - 55 to +150 C A W 1 HFA08TA60C Bulletin PD-2.601 rev. A 11/00 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameter VBR Cathode Anode Breakdown Voltage VFM Max Forward Voltage IRM Max Reverse Leakage Current CT Junction Capacitance LS Series Inductance Min Typ Max Units 600 V 1.5 1.8 1.4 0.17 44 4.0 1.8 2.2 1.7 3.0 300 8.0 V µA pF 8.0 nH Test Conditions IR = 100µA IF = 4.0A See Fig. 1 IF = 8.0A IF = 4.0A, TJ = 125°C See Fig. 2 VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD Rated VR = 200V See Fig. 3 Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameter trr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5, 6 & 16 Peak Recovery Current See Fig. 7& 8 Reverse Recovery Charge See Fig. 9 & 10 Peak Rate of Fall of Recovery Current During tb See Fig. 11 & 12 Min Typ Max Units 17 28 38 2.9 3.7 40 70 280 235 42 57 5.2 6.7 60 105 ns A nC A/µs Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V TJ = 25°C TJ = 125°C IF = 4.0A TJ = 25°C TJ = 125°C VR = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics Parameter Tlead! RthJC RthJA " RthCS# Lead Temperature Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Wt Weight T Mounting Torque ! " # 2 Min Typ Max Units 300 5.0 80 °C K/W 12 10 g (oz) Kg-cm lbf•in 0.5 2.0 0.07 6.0 5.0 0.063 in. from Case (1.6mm) for 10 sec Typical Socket Mount Mounting Surface, Flat, Smooth and Greased www.irf.com HFA08TA60C Bulletin PD-2.601 rev. A 11/00 1000 Reverse Current - IR (µA) TJ = 150°C 10 TJ = 125°C T = 25°C TJ = 150°C 100 10 TJ = 125°C 1 0.1 TJ = 25°C 0.01 0.001 J 0 100 200 300 400 500 Reverse Voltage - V R (V) Fig. 2 - Typical Reverse Current vs. Reverse Voltage 1 100 0.1 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Forward Voltage Drop - V Forward VFMFM((V) V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, Junction Capacitance -CT (pF) Instantaneous Forward Current - IF (A) 100 A TJ = 25°C 10 1 1 10 100 1000 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Thermal Response (Z thJC ) 10 D = 0.50 1 0.20 0.10 0.05 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) P DM 0.1 0.01 0.00001 t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics www.irf.com 3 HFA08TA60C Bulletin PD-2.601 rev. A 11/00 50 14 I F = 8.0A 45 12 I F = 4.0A 10 I F = 8.0A I F = 4.0A Irr- ( A) trr- (nC) 40 VR = 200V TJ = 125°C TJ = 25°C 35 8 6 30 4 25 2 VR = 200V TJ = 125°C TJ = 25°C 20 100 di f /dt - (A/µs) 0 100 1000 di f /dt - (A/µs) 1000 Fig. 6 - Typical Recovery Current vs. dif/dt Fig. 5 - Typical Reverse Recovery vs. dif/dt 1000 200 VR = 200V TJ = 125°C TJ = 25°C VR = 200V TJ = 125°C TJ = 25°C 160 I F = 8.0A I F = 4.0A Qrr- (nC) 120 di (rec) M/dt- (A /µs) I F = 8.0A 80 I F = 4.0A 40 0 100 di f /dt - (A/µs) Fig. 7 - Typical Stored Charge vs. dif/dt 4 1000 100 100 A di f /dt - (A/µs) 1000 Fig. 8 - Typical di(rec)M/dt vs. dif/dt, www.irf.com HFA08TA60C Bulletin PD-2.601 rev. A 11/00 3 t rr IF REVERSE RECOVERY CIRCUIT tb ta 0 Q rr VR = 200V 2 I RRM 4 0.5 I RRM di(rec)M/dt 0.01 Ω L = 70µH D.U.T. dif/dt ADJUST D G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test Circuit www.irf.com 5 0.75 I RRM 1 di f /dt 1. dif/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 3. trr - Reverse recovery time measured 5. di(rec)M/dt - Peak rate of change of from zero crossing point of negative current during tb portion of trr going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Fig. 10 - Reverse Recovery Waveform and Definitions 5 HFA08TA60C Bulletin PD-2.601 rev. A 11/00 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 1.32 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1.22 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2° 1 2 3 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 0.10 (0.004) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 2.64 (0.10) 0.94 (0.04) 0.69 (0.03) 1 2 3 4.57 (0.18) 0.61 (0.02) MAX. 4.32 (0.17) 5.08 (0.20) REF. Conforms to JEDEC Outline TO-220AB Dimensions in millimeters and inches WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. IR CANADA: 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. IR ITALY: Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. IR TAIWAN: 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. http://www.irf.com 6 Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. www.irf.com