Surface Mount ADP-2-20-75+ ADP-2-20-75 Power Splitter/Combiner 2 Way-0° 75Ω 5 to 2000 MHz Maximum Ratings Operating Temperature Storage Temperature Features -55°C to 100°C Power Input (as a splitter) Internal Dissipation 0.5W max. 0.25W max. Permanent damage may occur if any of these limits are exceeded. Pin Connections SUM PORT 1 PORT 1 3 PORT 2 4 GROUND 6 NOT USED CASE STYLE: CD542 • wide bandwidth, 5 to 2000 MHz • low insertion loss, 0.5 dB typ. • excellent amplitude unbalance, 0.05 dB typ. • excellent phase unbalance, 0.5 deg. typ. • aqueous washable • protected under U.S. Patent 6,133,525 -40°C to 85°C +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Reel Size 7” 13” Applications • instrumentation • PCS/cellular Electrical Specifications FREQ. RANGE (MHz) 2,5 Outline Drawing fL-fU 5-2000 L = 5-50 MHz ISOLATION (dB) INSERTION LOSS (dB) ABOVE 3.0 dB L M U Typ. Min Typ. Min Typ. Min 16 e and Reel Available Tapra cost at no ext Devices/Reel 10, 20, 50, 100, 200, 500 500, 1000 12 16 13 M = 50-1000 MHz 28 L 15 M PHASE UNBALANCE (Degrees) U Typ. Max. Typ. Max. Typ. Max. 0.4 0.9 0.5 1.2 0.6 AMPLITUDE UNBALANCE (dB) L M U L M U Max. Max. Max. Max. Max. Max. 1.0 4.0 5.0 0.15 0.3 0.6 1.4 U = 1000-2000 MHz Typical Performance Data Frequency (MHz) D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .112 2.84 F .055 1.40 G .100 2.54 VSWR S VSWR 1 VSWR 2 S-1 S-2 3.52 3.53 3.52 3.51 3.55 0.01 0.00 0.00 0.01 0.01 16.13 16.92 16.83 17.01 18.26 0.06 0.05 0.09 0.35 0.77 1.98 1.98 1.97 1.95 1.97 1.48 1.49 1.48 1.51 1.62 1.48 1.49 1.48 1.51 1.61 600.00 750.00 850.00 1000.00 1200.00 3.56 3.52 3.56 3.55 3.56 3.56 3.53 3.57 3.56 3.56 0.01 0.01 0.02 0.02 0.01 19.16 21.42 24.14 32.31 27.75 0.88 1.04 1.13 1.20 1.30 2.00 2.05 2.06 2.05 1.87 1.64 1.68 1.69 1.72 1.75 1.65 1.67 1.69 1.71 1.78 1300.00 1500.00 1700.00 1800.00 2000.00 3.57 3.62 3.68 3.72 3.79 3.58 3.61 3.66 3.69 3.73 0.01 0.01 0.03 0.03 0.06 23.96 21.15 22.76 25.81 21.22 1.24 1.24 1.07 0.93 0.36 1.74 1.48 1.18 1.05 1.29 1.77 1.84 1.82 1.77 1.64 1.81 1.84 1.84 1.81 1.62 1. Total Loss = Insertion Loss + 3dB splitter loss. wt grams 0.20 Demo Board MCL P/N: TB-243 Suggested PCB Layout (PL-141) Phase Unbalance (deg.) ADP-2-20-75 TOTAL LOSS 4.0 S-1(dB) 3.8 S-2(dB) 3.6 3.4 3.2 3.0 0 500 1000 ADP-2-20-75 ISOLATION 35 ISOLATION (dB) C .220 5.59 TOTAL LOSS (dB) B .310 7.87 Isolation (dB) 3.53 3.53 3.52 3.50 3.54 Suggested Layout, Tolerance to be within ± � .002 Outline Dimensions ( inch mm ) Amplitude Unbalance (dB) 5.00 10.00 50.00 200.00 500.00 PCB Land Pattern A .272 6.91 Total Loss1 (dB) 1500 2000 30 25 20 15 10 0 500 FREQUENCY (MHz) ADP-2-20-75 VSWR 2.6 2.4 #S-VSWR #1-VSWR 1000 1500 2000 FREQUENCY (MHz) electrical schematic #2-VSWR 2.2 VSWR 2.0 1.8 1.6 1.4 1.2 1.0 0 500 1000 1500 2000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. E M151107 ED-7971/1 ADP-2-20-75 HY/TD/CP/AM 150522