Surface Mount Bandpass Filter 50Ω CBP-1555C+ 1525 to 1585 MHz The Big Deal • • • • Narrow bandwidth Excellent Rejection High power handling Miniature shielded package CASE STYLE: MP1766 Product Overview CBP-1555C+ is a ceramic-coaxial-resonator based bandpass filter in a shielded package fabricated using SMT technology. This filter offers outstanding close in rejection, low insertion loss and high power handling for use in aeronautical and satellite applications Key Features Feature Advantages High Selectivity The CBP-1555C+ filter incorporates High-Q ceramic resonators that enables sharp rejection near passband. Low Passband VSWR This filter maintains typical VSWR over passband frequency range making this filter easier to integrate into receiver and transmitter RF chains with less concerns for in band frequency ripple. Rugged construction The CBP-1555C+ has been qualified over wide range of thermal, mechanical and environmental conditions including withstanding the stress of extensive solder reflow cycles. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 3 Surface Mount Bandpass Filter 50Ω CBP-1555C+ 1525 to 1585 MHz CASE STYLE: MP1766 Features • • • • • Narrow bandwidth Excellent rejection High selectivity High power handling Miniature shielded package Electrical Specifications at 25°C Parameter Pass Band Applications Stop Band, Lower • • • • Stop Band, Upper Aviation / Aeronautical Mobile satellite Differential GPS Maritime Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR F# Frequency (MHz) Min. Typ. Max. Unit — F1-F2 F1-F2 — 1525-1585 1525-1585 — — — 1555 1.10 1.43 — 2.50 2.32 MHz dB :1 DC-F3 DC-F3 DC-1415 DC-1415 20 — 29 20 — — dB :1 F4-F5 F4-F5 1700-3600 1700-3600 20 — 27 20 — — dB :1 Maximum Ratings Functional Schematic RF IN Operating Temperature Storage Temperature RF Power Input -40°C to 85°C -55°C to 100°C 10W Permanent damage may occur if any of these limits are exceeded. RF OUT Typical Performance Data at 25°C Frequency (MHz) Typical Frequency Response FREQUENCY (MHz) F3 F1 F2 F4 F5 INSERTION LOSS (dB) Group Delay (nsec) CBP-1555C+ INSERTION LOSS (Pass band) CBP-1555C+ INSERTION LOSS (Full band) 0 INSERTION LOSS (dB) INSERTION LOSS (dB) +RoHS Compliant Frequency (MHz) 1 99.52 289.53 1525 6.79 550 90.84 347.44 1528 6.68 1150 69.10 108.58 1530 6.62 1415 29.55 36.97 1532 6.56 1437 20.92 26.33 1534 6.52 1456 12.06 13.29 1536 6.47 1468 6.18 5.65 1538 6.43 1475 3.48 3.03 1540 6.40 1525 0.98 1.19 1542 6.38 1555 0.93 1.17 1544 6.36 1585 0.96 1.03 1550 6.34 1600 1.33 1.46 1553 6.36 1615 3.57 3.73 1555 6.37 1625 6.55 7.73 1558 6.40 1640 11.70 18.90 1560 6.42 1670 20.64 46.96 1565 6.48 1700 27.54 66.82 1570 6.58 1715 30.46 75.53 1575 6.71 2000 78.98 91.43 1580 6.90 3600 40.03 57.91 1585 7.18 0 The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications VSWR (:1) 25 50 75 100 0 600 1200 1800 2400 FREQUENCY (MHz) 3000 3600 0.85 0.95 20 1.05 1400 CBP-1555C+ VSWR 1000 VSWR (:1) 10 1525 30 100 1.3 1.1 10 0.9 1525 1 0 600 1450 1545 1200 1800 2400 FREQUENCY (MHz) 1565 1585 3000 3600 1545 1565 1585 1500 1550 1600 FREQUENCY (MHz) 1700 1575 1585 7.1 6.8 6.5 6.2 1525 1535 1545 1555 1565 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits 1650 CBP-1555C+ GROUP DELAY 7.4 GROUP DELAY (ns) DC Insertion Loss (dB) ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV.A M151121 CBP-1555C+ EDU1823 URJ 161012 Page 2 of 3 CBP-1555C+ Bandpass Filter Pad Connections Outline Drawing INPUT 1 OUTPUT GROUND 10 2,3,4,5,6,7,8,9,11,12,13 Demo Board MCL P/N: TB-684+ Suggested PCB Layout (PL-373) Outline Dimensions ( inch mm ) A .750 19.05 B .750 19.05 C .210 5.33 D .139 3.53 E .157 3.99 F .215 5.46 G .160 4.06 H .218 5.54 J .157 3.99 K .100 2.54 L .060 1.52 P .790 20.07 Q .541 13.74 R .790 20.07 S .499 12.67 T .384 9.75 U .203 5.16 V .080 2.03 W .069 1.75 X .630 16.00 Y .630 16.00 Z .145 3.68 M .069 1.75 N .149 3.78 wt, grams 4.6 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3