Fairchild FOD3120SV High noise immunity, 2.5a output current, gate drive optocoupler Datasheet

FOD3120
High Noise Immunity, 2.5A Output Current,
Gate Drive Optocoupler
Features
Description
■ High noise immunity characterized by 35kV/µs
The FOD3120 is a 2.5A Output Current Gate Drive
Optocoupler, capable of driving most 1200V/20A
IGBT/MOSFET. It is ideally suited for fast switching
driving of power IGBT and MOSFETs used in motor
control inverter applications, and high performance
power system.
■
■
■
■
■
■
■
■
■
■
minimum common mode rejection
2.5A peak output current driving capability for most
1200V/20A IGBT
Use of P-channel MOSFETs at output stage enables
output voltage swing close to the supply rail
Wide supply voltage range from 15V to 30V
Fast switching speed
– 400ns max. propagation delay
– 100ns max. pulse width distortion
Under Voltage LockOut (UVLO) with hysteresis
Extended industrial temperate range, -40°C to 100°C
temperature range
Safety and regulatory approved
– UL1577, 5000 VRMS for 1 min.
– IEC60747-5-2
RDS(ON) of 1Ω (typ.) offers lower power
dissipation
>8.0mm clearance and creepage distance
(option ‘T’ or ‘TS’)
1,414V Peak Working Insulation Voltage (VIORM)
It utilizes Fairchild’s proprietary coplanar packaging
technology, Optoplanar®, and optimized IC design to
achieve high noise immunity, characterized by high
common mode rejection.
It consists of a gallium aluminum arsenide (AlGaAs) light
emitting diode optically coupled to an integrated circuit
with a high-speed driver for push-pull MOSFET output
stage.
Related Resources
■ FOD3150, 1A Output Current, Gate Drive
Optocoupler Datasheet
■ www.fairchildsemi.com/products/opto/
Applications
■
■
■
■
Industrial inverter
Uninterruptible power supply
Induction heating
Isolated IGBT/Power MOSFET gate drive
Functional Block Diagram
Package Outlines
NC 1
8 VCC
ANODE 2
7 VO2
8
8
1
1
CATHODE 3
6 VO1
NC 4
5 VEE
8
8
1
Note:
A 0.1µF bypass capacitor must be connected between pins 5 and 8.
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
1
www.fairchildsemi.com
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
October 2009
LED
VCC – VEE “Positive Going”
(Turn-on)
VCC – VEE “Negative Going”
(Turn-off)
VO
Off
0V to 30V
0V to 30V
Low
On
0V to 11.5V
0V to 10V
Low
On
11.5V to 13.5V
10V to 12V
Transition
On
13.5V to 30V
12V to 30V
High
Pin Definitions
Pin #
Name
Description
1
NC
2
Anode
3
Cathode
4
NC
Not Connected
5
VEE
Negative Supply Voltage
6
VO2
Output Voltage 2 (internally connected to VO1)
7
VO1
Output Voltage 1
8
VCC
Positive Supply Voltage
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
Not Connected
LED Anode
LED Cathode
www.fairchildsemi.com
2
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Truth Table
As per IEC 60747-5-2. This optocoupler is suitable for “safe electrical insulation” only within the safety limit data.
Compliance with the safety ratings shall be ensured by means of protective circuits.
Symbol
Parameter
Min.
Typ.
Max.
Unit
Installation Classifications per DIN VDE 0110/1.89 Table 1
For Rated Mains Voltage < 150Vrms
I–IV
For Rated Mains Voltage < 300Vrms
I–IV
For Rated Mains Voltage < 450Vrms
I–III
For Rated Mains Voltage < 600Vrms
I–III
For Rated Mains Voltage < 1000Vrms (Option T, TS)
I–III
Climatic Classification
40/100/21
Pollution Degree (DIN VDE 0110/1.89)
2
CTI
Comparative Tracking Index
175
VPR
Input to Output Test Voltage, Method b,
VIORM x 1.875 = VPR, 100% Production Test with
tm = 1 sec., Partial Discharge < 5pC
2651
Input to Output Test Voltage, Method a,
VIORM x 1.5 = VPR, Type and Sample Test with
tm = 60 sec.,Partial Discharge < 5 pC
2121
VIORM
Max Working Insulation Voltage
1,414
Vpeak
VIOTM
Highest Allowable Over Voltage
6000
Vpeak
External Creepage
8
mm
External Clearance
7.4
mm
10.16
mm
0.5
mm
Case Temperature
150
°C
Input Current
25
mA
Output Power (Duty Factor ≤ 2.7%)
250
mW
109
Ω
External Clearance (for Option T or TS - 0.4” Lead Spacing)
Insulation Thickness
Safety Limit Values – Maximum Values Allowed in the
Event of a Failure
TCase
IS,INPUT
PS,OUTPUT
RIO
Insulation Resistance at TS, VIO = 500V
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
3
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Safety and Insulation Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Value
Units
TSTG
Storage Temperature
Parameter
-55 to +125
ºC
TOPR
Operating Temperature
-40 to +100
ºC
Junction Temperature
-40 to +125
ºC
260 for 10sec
ºC
25
mA
1
A
50
kHz
5
V
3.0
A
TJ
TSOL
Lead Wave Solder Temperature
(refer to page 21 for reflow solder profile)
IF(AVG)
Average Input Current
Peak Transient Forward
IF(PEAK)
f
Operating
VR
Current(10)
Frequency(11)
Reverse Input Voltage
Current(1)
Peak Output
IO(PEAK)
VCC – VEE
Supply Voltage
0 to 35
TA ≥ 90°C
Peak Output Voltage
VO(PEAK)
tR(IN), tF(IN)
PDI
V
500
ns
45
mW
250
mW
Dissipation(2)(4)
Output Power
PDO
0 to VCC
Input Signal Rise and Fall Time
Input Power
V
0 to 30
Dissipation(3)(4)
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
Parameter
TA
Ambient Operating Temperature
VCC – VEE
Value
Units
-40 to +100
°C
Power Supply
15 to 30
V
IF(ON)
Input Current (ON)
7 to 16
mA
VF(OFF)
Input Voltage (OFF)
0 to 0.8
V
Isolation Characteristics
Apply over all recommended conditions, typical value is measured at TA = 25ºC
Symbol
Parameter
Conditions
VISO
Input-Output Isolation
Voltage
TA = 25ºC, R.H.< 50%, t = 1.0min,
II-O ≤ 10µA, 50Hz(5)(6)
RISO
Isolation Resistance
VI-O = 500V(5)
CISO
Isolation Capacitance
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
VI-O = 0V, Freq =
1.0MHz(5)
Min.
Typ.
5000
Max.
Units
VRMS
1011
Ω
1
pF
www.fairchildsemi.com
4
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Absolute Maximum Ratings (TA = 25ºC unless otherwise specified)
Apply over all recommended conditions, typical value is measured at VCC = 30V, VEE = Ground, TA = 25°C
unless otherwise specified.
Symbol
VF
Parameter
Input Forward Voltage
Conditions
IF = 10mA
Min.
1.2
∆(VF / TA) Temperature Coefficient of
Forward Voltage
Input Reverse Breakdown
Voltage
IR = 10µA
CIN
Input Capacitance
f = 1MHz, VF = 0V
IOH
High Level Output
Max.
1.5
1.8
mV/ºC
5
V
60
VO = VCC – 3V
-1
VO = VCC – 6V
-2.0
1
-2.0
pF
-2.5
A
-2.5
IOL
Low Level Output Current(1)
VO = VEE + 3V
VOH
High Level Output Voltage
IF = 10mA, IO = -2.5A
VCC – 6.25V
VCC – 2.5V
IF = 10mA, IO = -100mA
VCC – 0.25V
VCC – 0.1V
VOL
Low Level Output Voltage
ICCH
High Level Supply Current
VO = Open, IF = 7 to 16mA
ICCL
Low Level Supply Current
IFLH
VO = VEE + 6V
Units
V
-1.8
BVR
Current(1)
Typ.
2.0
2.0
2.5
A
2.5
V
IF = 0mA, IO = 2.5A
VEE + 2.5V
VEE + 6.25V
IF = 0mA, IO = 100mA
VEE + 0.1V
VEE + 0.25V
2.8
3.8
mA
VO = Open, VF = 0 to 0.8V
2.8
3.8
mA
Threshold Input Current
Low to High
IO = 0mA, VO > 5V
2.3
5.0
mA
VFHL
Threshold Input Voltage
High to Low
IO = 0mA, VO < 5V
0.8
VUVLO+
Under Voltage Lockout
Threshold
IF = 10mA, VO > 5V
11.5
12.7
13.5
V
IF = 10mA, VO < 5V
10.0
11.2
12.0
V
VUVLO–
UVLOHYS Under Voltage Lockout
Threshold Hysteresis
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
V
V
1.5
V
www.fairchildsemi.com
5
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Electrical Characteristics
Apply over all recommended conditions, typical value is measured at VCC = 30V, VEE = Ground, TA = 25°C
unless otherwise specified.
Symbol
tPHL
tPLH
Parameter
Conditions
Propagation Delay Time to Logic IF = 7mA to 16mA,
Low Output
Rg = 10Ω, Cg =10nF,
Propagation Delay Time to Logic f = 10kHz, Duty Cycle = 50%
Min.
Typ.
Max.
Units
150
275
400
ns
150
255
400
ns
20
100
ns
250
ns
High Output
PWD
PDD
(Skew)
Pulse Width Distortion,
| tPHL – tPLH |
-250
Propagation Delay Difference
Between Any Two Parts or
Channels, (tPHL – tPLH)(7)
tr
Output Rise Time (10% – 90%)
tf
Output Fall Time (90% – 10%)
60
ns
60
ns
tUVLO ON
UVLO Turn On Delay
IF = 10mA , VO > 5V
1.6
µs
tUVLO OFF
UVLO Turn Off Delay
IF = 10mA , VO < 5V
0.4
µs
| CMH |
Common Mode Transient
Immunity at Output High
TA = 25°C, VCC = 30V,
IF = 7 to 16mA, VCM = 2000V(8)
35
50
kV/µs
| CML |
Common Mode Transient
Immunity at Output Low
TA = 25°C, VCC = 30V, VF = 0V,
VCM = 2000V(9)
35
50
kV/µs
Notes:
1. Maximum pulse width = 10µs, maximum duty cycle = 1.1%
2. Derate linearly above 87°C, free air temperature at a rate of 0.77mW/°C
3. No derating required across temperature range.
4. Functional operation under these conditions is not implied. Permanent damage may occur if the device is
subjected to conditions outside these ratings.
5. Device is considered a two terminal device: Pins 2 and 3 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
6. 5,000 VRMS for 1 minute duration is equivalent to 6,000 VACRMS for 1 second duration.
7. The difference between tPHL and tPLH between any two FOD3120 parts under same test conditions.
8. Common mode transient immunity at output high is the maximum tolerable negative dVcm/dt on the trailing edge of
the common mode impulse signal, Vcm, to assure that the output will remain high (i.e. VO > 15.0V).
9. Common mode transient immunity at output low is the maximum tolerable positive dVcm/dt on the leading edge of
the common pulse signal, Vcm, to assure that the output will remain low (i.e. VO < 1.0V).
10. Pulse Width, PW ≤ 1µs, 300pps
11. Exponential Waveform, IO(PEAK) ≤ | 2.5A | (≤ 0.3µs)
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
6
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Switching Characteristics
(VOH - VCC) - OUTPUT HIGH VOLTAGE DROP (V)
0.5
Frequency = 250Hz
Duty C ycle = 0.1%
IF = 7 to 16mA
VC C = 1 5 to 30V
VE E = 0V
0.0
-0.5
TA = -40°C
-1.0
-1.5
T A = 25°C
TA = 100 °C
-2.0
-2.5
-3.0
0. 0
0.5
1.0
1.5
2.0
2.5
(VOH- VCC) - HIGH OUTPUT VOLTAGE DROP (V)
Fig. 2 Output High Voltage Drop vs. Ambient Temperature
Fig. 1 Output High Voltage Drop vs. Output High Current
0.00
VC C = 15V to 30V
VEE = 0V
IF = 7mA to 16mA
IO = -100mA
-0.05
-0.10
-0.15
-0.20
-0.25
-0.30
-40
-20
0
IOH - OUTPUT HIGH CURRENT (A)
Fig. 3 Output High Current vs. Ambient Temperature
R g = 5Ω to GND
6
VCC = 30V
4
VCC = 15V
2
0
-4 0
-2 0
0
20
40
60
80
4
3
2
VCC = 15V
1
0
-4 0
10 0
-20
20
40
60
80
100
Fig. 6 Output Low Voltage vs. Ambient Temperature
V OL - OUTPUT LOW VOLTAGE (V)
V OL - OUTPUT LOW VOLTAGE (V)
0
TA – AMBIENT TEMPERATURE (°C)
Frequency = 250Hz
Duty Cycle = 99.9%
V F( OFF) = -3.0V to 0.8V
V CC = 15V to 30V
V EE = 0V
T A = 100°C
TA = 25°C
2
0
0.0
100
VCC = 30V
0.25
TA = -40°C
1
80
R g = 10Ω to GND
Fig. 5 Output Low Voltage vs. Output Low Current
3
60
f = 10 0 Hz
DUTY CYCLE = 0.5%
IF = 7 t o 16mA
TA – AMBIENT TEMPERATURE (°C)
4
40
Fig. 4 Output High Current vs. Ambient Temperature
5
f = 200 Hz
DUTY CYCLE = 0.2%
IF = 7 to 16mA
I OH – OUTPUT HIGH CURRENT (A)
IOH – OUTPUT HIGH CURRENT (A)
8
20
T A - AMBIENT TEMPERATURE (°C)
V CC = 15V to 30V
V EE = 0V
VF(OFF) = -3V to 0.8V
I O = 100mA
0.20
0.15
0.10
0.05
0.00
0.5
1.0
1.5
2.0
-40
2.5
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
-20
0
20
40
60
80
100
TA - AMBIENT TEMPERATURE (°C)
IO L - OUTPUT LOW CURRENT (A)
www.fairchildsemi.com
7
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Typical Performance Curves
Fig. 8 Output Low Current vs. Ambient Temperature
Fig. 7 Output Low Current vs. Ambient Temperature
5
f = 200 Hz
D UTY CYCLE = 99.8%
IF = 7 to 16mA
IOL – OUTPUT LOW CURRENT (A)
IO L – OUTPUT LOW CU RRENT (A)
8
R g = 5Ω to V CC
6
V CC = 30V
4
V CC = 15V
2
0
-40
f = 10 0 Hz
DUTY CYCLE = 99.5 %
IF = 7 t o 16mA
R g = 10Ω to VCC
4
3
VCC = 30V
2
VCC = 15V
1
0
-4 0
-20
0
20
40
60
80
-20
0
100
20
40
60
80
100
TA – AMBIENT TEMPERATURE (°C)
T – AMBIENT TEMPERATURE (°C)
Fig. 9 Supply Current vs. Ambient Temperature
3.6
ICC - SUPPLY CURR ENT (mA)
3.4
ICC - SUPPLY CURR ENT (mA)
Fig. 10 Supply Current vs. Supply Voltage
3.6
VCC = 30V
VEE = 0V
I F = 0m A (for I CCL)
I F = 10mA (for ICCH)
3.2
3.0
ICCH
2.8
I CCL
2.6
I F = 10mA (for ICCH)
I F = 0m A (for I CCL)
VEE = 0 , TA =25°C
3.2
2.8
I CCH
I CCL
2.4
2.4
2.0
2.2
-40
-20
0
20
40
60
80
100
15
20
Fig. 11 Low to High Input Current Threshold vs.
Ambient Temperature
V CC = 15V to 30V
V EE = 0V
Output = Open
3.0
2.5
P
2.0
1.5
-20
0
20
40
60
80
100
Rg = 1 0Ω, Cg = 10 nF
DUTY CYCLE = 50%
f = 10 kHz
300
tP HL
250
tPLH
200
150
18
21
24
27
30
VC C – SUPPLY VOLTAGE (V)
T A - AMBIENT TE MPERATURE (°C)
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
350
IF = 10mA
T A = 25 °C
100
15
1.0
-40
30
Fig. 12 Propagation Delay vs. Supply Voltage
400
4.0
3.5
25
V - SUPPLY VOLTAGE (V)
t - PROPAGATOIN DELAY (ns)
IFLH - LOW TO HIGH CURRENT THRESHOLD (mA)
T A - AMBIENT TEMPEATURE (°C)
www.fairchildsemi.com
8
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Typical Performance Curves (Continued)
Fig. 14 Propagation Delay vs. Ambient Temperature
Fig. 13 Propagation Delay vs. LED Forward Current
500
IF = 10mA
VCC = 30V , VEE = 0V
VCC = 30 V, VEE = 0V
Rg = 10Ω, Cg = 1 0nF
T A = 25°C
DUTY CYCLE = 50%
f = 10 kHz
400
300
t –PROPOGATION DELAY (ns)
t –PROPOGATION DELAY (ns)
500
tPHL
tPLH
300
tPH L
tPLH
200
P
P
200
Rg = 10Ω, Cg = 1 0nF
DUTY CYCLE = 50%
f = 10 kHz
400
100
-4 0
100
6
8
10
12
14
16
-2 0
I F – FORWARD LED CURRENT (mA)
Fig. 15 Propagation Delay vs. Sereies Load Resistance
t –PROPOGATION DELAY (ns)
Cg = 10nF
T A = 25°C
DUTY CYCLE = 50%
f = 10 kHz
400
20
40
60
80
1 00
Fig. 16 Propagation Delay vs. Load Capacitance
500
IF = 10mA
VCC = 30V , VEE = 0V
300
tPHL
tPLH
IF = 10mA
VCC = 30 V, VEE = 0V
Rg = 10Ω
T A = 25°C
400
DUTY CYCLE = 50%
f = 10 kHz
300
tPHL
tPLH
200
P
200
P
t –PROPOGATION DELAY (ns)
500
0
TA – AMBIENT TEMPERATURE (°C)
100
0
10
20
30
40
100
50
0
20
Fig. 17 Transfer Characteristics
35
40
60
80
100
C g - L OAD CA PACITA NCE (n F)
R g - SE RIES LO AD RESISTANCE (Ω)
Fig. 18 Input Forward Current vs. Forward Voltage
100
T = 25°C
A
V
CC
= 30V
IF - F ORWARD CURRENT (mA)
O
V – OUTPUT VOLTAGE (V)
30
25
20
15
10
10
TA = 100°C
1
TA = -40°C
0.1
TA = 25°C
0. 01
5
0.001
0.6
0
0
1
2
3
4
5
1.0
1.2
1.4
1.6
1.8
V F - FORWARD VOLTAGE (V)
IF – FOR WA RD LE D CURR EN T ( mA )
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
0.8
www.fairchildsemi.com
9
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Typical Performance Curves (Continued)
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Typical Performance Curves (Continued)
Fig. 19 Under Voltage Lockout
14
(12.7 5, 12.80)
12
VO – OUTPUTVOLTAGE (V)
(11.25, 11.30)
10
8
6
4
2
(11.20 , 0 .00)
(12.70, 0.00)
0
0
5
10
15
20
(VC C - VEE) – SU PPLY VOLTAGE (V)
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
10
Power Supply
+
+
C1
0.1µF
VCC = 15V to 30V
C2
47µF
Pulse Generator
PW = 4.99ms
Period = 5ms
ROUT = 50Ω
1
8
2
7
3
6
Pulse-In
Iol
R2
100Ω
D1
VOL
LED-IFmon
Power Supply
+
+
C3
0.1µF
V = 6V
C4
47µF
5
4
R1
100Ω
To Scope
Test Conditions:
Frequency = 200Hz
Duty Cycle = 99.8%
VCC = 15V to 30V
VEE = 0V
VF(OFF) = -3.0V to 0.8V
Figure 20. IOL Test Circuit
Power Supply
+
+
C1
0.1µF
VCC = 15V to 30V
C2
47µF
Pulse Generator
PW = 10µs
Period = 5ms
ROUT = 50Ω
1
8
2
7
Pulse-In
+
+
C3
0.1µF
Ioh
R2
100Ω
3
6
4
5
Power Supply
V = 6V
–
VOH
LED-IFmon
C4
47µF
D1
Current
Probe
To Scope
R1
100Ω
Test Conditions:
Frequency = 200Hz
Duty Cycle = 0.2%
VCC = 15V to 30V
VEE = 0V
IF = 7mA to 16mA
Figure 21. IOH Test Circuit
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
11
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Test Circuit
1
8
2
7
0.1µF
+
–
IF = 7 to 16mA
VO
6
3
VCC = 15 to 30V
100mA
4
5
Figure 22. VOH Test Circuit
1
8
2
7
100mA
+
–
0.1µF
3
6
4
5
VCC = 15 to 30V
VO
Figure 23. VOL Test Circuit
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
12
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Test Circuit (Continued)
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Test Circuit (Continued)
1
8
2
7
0.1µF
IF = 7 to 16mA
3
6
4
5
+
–
VCC = 30V
+
–
VCC = 30V
VO
Figure 24. ICCH Test Circuit
+
–
1
8
2
7
0.1µF
VF = -0.3 to 0.8V
3
6
4
5
VO
Figure 25. ICCL Test Circuit
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
13
IF
1
8
2
7
3
6
4
5
0.1µF
+
–
VCC = 15 to 30V
+
–
VCC = 15 to 30V
VO > 5V
Figure 26. IFLH Test Circuit
+
–
1
8
2
7
0.1µF
VF = –0.3 to 0.8V
3
6
4
5
VO
Figure 27. VFHL Test Circuit
1
8
2
7
0.1µF
+
–
IF = 10mA
3
6
4
5
VO = 5V
15V or 30V
VCC Ramp
Figure 28. UVLO Test Circuit
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
14
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Test Circuit (Continued)
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Test Circuit (Continued)
1
8
0.1µF
2
+
–
Probe
F = 10kHz
DC = 50%
7
3
6
4
5
VO
+
–
VCC = 15 to 30V
Rg = 10Ω
Cg = 10nF
50Ω
IF
tr
tf
90%
50%
VOUT
10%
tPLH
tPHL
Figure 29. tPHL, tPLH, tR and tF Test Circuit and Waveforms
IF
1
8
2
7
A
0.1µF
+
–
B
5V
+
–
3
6
4
5
VCC = 30V
VO
+–
VCM = 2,000V
VCM
0V
∆t
VO
VOH
Switch at A: IF = 10mA
VO
VOL
Switch at B: IF = 0mA
Figure 30. CMR Test Circuit and Waveforms
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
15
Through Hole
0.4" Lead Spacing (Option T)
PIN 1
ID.
4
3
2
PIN 1
ID.
1
4
3
2
1
0.270 (6.86)
0.250 (6.35)
5
6
7
0.270 (6.86)
0.250 (6.35)
8
5
0.070 (1.78)
0.045 (1.14)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
7
8
0.390 (9.91)
0.370 (9.40)
0.020 (0.51)
MIN
0.200 (5.08)
MAX
6
0.156 (3.94)
0.144 (3.68)
SEATING PLANE
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.156 (3.94)
0.070 (1.78)
0.144 (3.68)
0.045 (1.14)
0.020 (0.51)
MIN
0.200 (5.08)
MAX
15° MAX
0.016 (0.40)
0.008 (0.20)
0.154 (3.90)
0.120 (3.05)
0.300 (7.62)
TYP
0.100 (2.54) TYP
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0.031 (0.78)
Surface Mount – 0.3" Lead Spacing (Option S)
0° to 15°
0.400 (10.16)
TYP
8-Pin Surface Mount DIP – Land Pattern
(Option S)
0.390 (9.91)
0.370 (9.40)
4
3
2
0.070 (1.78)
PIN 1
ID.
1
0.060 (1.52)
0.270 (6.86)
0.250 (6.35)
5
6
7
0.100 (2.54)
8
0.295 (7.49)
0.156 (3.94)
0.144 (3.68)
0.070 (1.78)
0.045 (1.14)
0.020 (0.51)
MIN
0.200 (5.08)
MAX
0.022 (0.56)
0.016 (0.41)
0.100 (2.54)
TYP
0.415 (10.54)
0.300 (7.62)
TYP
0.030 (0.76)
0.016 (0.40)
0.008 (0.20)
0.015 (0.40) MIN
Both Sides
0.315 (8.00)
MIN
0.405 (10.30)
MAX.
Note:
All dimensions are in inches (millimeters)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
16
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Package Dimensions
Surface Mount – 0.4" Lead Spacing (Option TS)
8-Pin Surface Mount DIP – Land Pattern
(Option TS)
0.390 (9.91)
0.370 (9.40)
4
3
2
1
0.070 (1.78)
PIN 1
ID.
0.060 (1.52)
0.270 (6.86)
0.250 (6.35)
5
6
7
0.100 (2.54)
8
0.392 (9.96)
0.156 (3.94)
0.144 (3.68)
0.020 (0.51)
MIN
0.200 (5.08)
MAX
0.511 (13.0)
0.300 (7.62)
TYP
0.070 (1.78)
0.045 (1.14)
0.031 (0.775)
0.022 (0.56)
0.016 (0.41)
0.100 (2.54)
TYP
0.030 (0.76)
0.016 (0.40)
0.008 (0.20)
0.015 (0.40) MIN
Both Sides
0.400 (10.16)
0.497 (12.6)
MAX.
Note:
All dimensions are in inches (millimeters)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
17
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Package Dimensions (Continued)
Part Number
Package
Packing Method
FOD3120
DIP 8-Pin
Tube (50 units per tube)
FOD3120S
SMT 8-Pin (Lead Bend)
Tube (50 units per tube)
FOD3120SD
SMT 8-Pin (Lead Bend)
Tape and Reel (1,000 units per reel)
FOD3120V
DIP 8-Pin, IEC60747-5-2 option
Tube (50 units per tube)
FOD3120SV
SMT 8-Pin (Lead Bend), IEC60747-5-2 option
Tube (50 units per tube)
FOD3120SDV
SMT 8-Pin (Lead Bend), IEC60747-5-2 option
Tape and Reel (1,000 units per reel)
FOD3120T
DIP 8-Pin, 0.4” Lead Spacing
Tube (50 units per tube)
FOD3120TV
DIP 8-Pin, 0.4” Lead Spacing, IEC60747-5-2 option
Tube (50 units per tube)
FOD3120TS
SMT 8-Pin, 0.4” Lead Spacing
Tube (50 units per tube)
FOD3120TSV
SMT 8-Pin, 0.4” Lead Spacing, IEC60747-5-2 option
Tube (50 units per tube)
FOD3120TSR2
SMT 8-Pin, 0.4” Lead Spacing
Tape and Reel (700 units per reel)
FOD3120TSR2V
SMT 8-Pin, 0.4” Lead Spacing, IEC60747-5-2 option
Tape and Reel (700 units per reel)
Marking Information
1
3120
V XX YY B
3
2
6
5
4
Definitions
1
Fairchild logo
2
Device number
3
IEC60747-5-2 Option (only appears on component ordered
with this option) (Pending approval)
4
Two digit year code, e.g., ‘08’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
18
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Ordering Information
D0
P0
t
K0
P2
E
F
A0
W1
d
t
P
User Direction of Feed
Symbol
W
W
B0
Description
D1
Dimension in mm
Tape Width
16.0 ± 0.3
Tape Thickness
0.30 ± 0.05
P0
Sprocket Hole Pitch
4.0 ± 0.1
D0
Sprocket Hole Diameter
1.55 ± 0.05
E
Sprocket Hole Location
1.75 ± 0.10
F
Pocket Location
7.5 ± 0.1
2.0 ± 0.1
P2
P
Pocket Pitch
A0
Pocket Dimensions
12.0 ± 0.1
10.30 ±0.20
B0
10.30 ±0.20
K0
4.90 ±0.20
W1
d
R
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
Cover Tape Width
13.2 ± 0.2
Cover Tape Thickness
0.1 max
Max. Component Rotation or Tilt
10°
Min. Bending Radius
30
www.fairchildsemi.com
19
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Carrier Tape Specifications (Option SD)
D0
P0
t
K0
P2
E
F
A0
W1
d
P
User Direction of Feed
Symbol
W
W
B0
Description
D1
Dimension in mm
Tape Width
24.0 ± 0.3
Tape Thickness
0.40 ± 0.1
P0
Sprocket Hole Pitch
4.0 ± 0.1
D0
Sprocket Hole Diameter
1.55 ± 0.05
E
Sprocket Hole Location
1.75 ± 0.10
F
Pocket Location
11.5 ± 0.1
t
2.0 ± 0.1
P2
P
Pocket Pitch
A0
Pocket Dimensions
16.0 ± 0.1
12.80 ± 0.1
B0
10.35 ± 0.1
K0
5.7 ±0.1
W1
d
R
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
Cover Tape Width
21.0 ± 0.1
Cover Tape Thickness
0.1 max
Max. Component Rotation or Tilt
10°
Min. Bending Radius
30
www.fairchildsemi.com
20
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Carrier Tape Specifications (Option TSR2)
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
Reflow Profile
Temperature (°C)
TP
260
240
TL
220
200
180
160
140
120
100
80
60
40
20
0
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
tP
Tsmax
tL
Preheat Area
Tsmin
ts
120
240
360
Time 25°C to Peak
Time (seconds)
Profile Freature
Pb-Free Assembly Profile
Temperature Min. (Tsmin)
150°C
Temperature Max. (Tsmax)
200°C
Time (tS) from (Tsmin to Tsmax)
60–120 seconds
Ramp-up Rate (tL to tP)
3°C/second max.
Liquidous Temperature (TL)
217°C
Time (tL) Maintained Above (TL)
60–150 seconds
Peak Body Package Temperature
260°C +0°C / –5°C
Time (tP) within 5°C of 260°C
30 seconds
Ramp-down Rate (TP to TL)
6°C/second max.
Time 25°C to Peak Temperature
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
8 minutes max.
www.fairchildsemi.com
21
Auto-SPM™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™*
™*
®
®
Fairchild
®
Fairchild Semiconductor
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FETBench™
FlashWriter®*
FPS™
F-PFS™
FRFET®
SM
Global Power Resource
Green FPS™
Green FPS™ e-Series™
Gmax™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
Sync-Lock™
®
*
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TriFault Detect™
TRUECURRENT™*
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I40
©2003 Fairchild Semiconductor Corporation
FOD3120 Rev. 1.17.0
www.fairchildsemi.com
22
FOD3120 — High Noise Immunity, 2.5A Output Current, Gate Drive Optocoupler
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.