#A915AY-1R1M=P3 < List of part num bers with package codes > #A915AY-1R1M=P3 Shape Notes Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20℃) Rated current (Itemp) is specified when temperature of the inductor is raised 40℃ by DC current. (The ambient reference temperature is 20℃) References Packaging code L size 5.2 mm W size 5.2 mm T size 3.0 mm Size code in inch (mm) 2020 (5252) =P3 Specifications φ330mm Embossed taping Minimum quantity 2000 Mass (Typ.) 1 piece 0.223g Specifications Inductance 1.1µH ±20% Inductance test frequency 0.1MHz Rated current (Isat) (Based on Inductance change) 3870mA Rated current (Itemp) (Based on Temperature rise) 3460mA Max. of DC resistance 0.020Ω Operating temperature range (Self-temperature rise is included) -40～85℃ Class of magnetic shield Ferrite Core 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 20 17/0 2/0 6 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Inductance-Current characteristics (Typ.) Temperature rise characteristics (Typ.) 2 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Last updated: 20 17/0 2/0 6