Signal Relays AXICOM IM - B Relay n n n n n n n Minimum board-space 60mm2 Slim line 10x6mm (0.39x0.24”) and low profile 5.65mm (0.222”) Switching power 60W/62.5VA Switching voltage 220VDC/250VAC Switching current 2A Bifurcated contacts High mechanical shock resistance IM_AB Typical applications Telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and Test equipment, industrial control, medical equipment U Approvals UL 508 File No. E 111441 Technical data of approved types on request AXICOMÊSignalÊRelays Contact Data 108-98001 Rev. M Mechanical endurance IM Relay 110VDC, 0.3A, 33W 220VDC, 0.27A, 60W 125VAC, 0.5A, 62.5W 250VAC, 0.25A, 62.5W 108 operations Contact arrangement 1 form A (1 NO) Max. switching voltage 220VDC, 250VAC Contact Data Rated current 2A Limiting continuous current 2A IM-B IM-C IM-D IM-E Switching power 60W,IM-A 62.5VA Number of contacts and type 1ÊPoleÊbreak 1ÊPoleÊmake 1ÊPoleÊÊ 2ÊPoleÊbreak 2ÊPoleÊmake Contact material PdRu Coil Data changeover Au covered Magnetic system monostable, bistable Contact assembly BifurcatedÊcontacts Contact style twin contacts Coil voltage range 1.5 to 24VDC Contact material Palladium-ruthenium,Êgold-covered Minimum switching 100µV 125°C Limiting voltage continuous current 2ÊA 2ÊA 4ÊA Max. coil temperature 2ÊA 2ÊA at max. ambient temperature Initial contact resistance <100mΩ at 10mA/30mV Thermal resistance <150K/W switching current 2ÊA 2ÊA 3ÊA 2ÊA 2ÊA ThermoelectricMaximum potential <10µV Maximum swichting voltage 220ÊVdc Operate time typ. 1ms, max. 3ms Coil versions, standard version, monostable, 1 coil 250ÊVac Release time Maximum switching capacity Coil Rated Operate Release Coil Rated coil 60ÊW,Ê62.5ÊVA without diode in parallel typ. 1ms, max. 3ms code voltage voltage voltage resistance power Thermoelectric potential <Ê10ʵV with diode in parallel typ. 3ms, max. 5ms VDC VDC VDC Ω±10% mW Minimum switching voltage 100ʵV Bounce time max. typ. 1ms, 5ms 01 0.30 64 140 Initial contact resistance / < 100 max. mΩ < 100 mΩ NO < 100 mΩ < 50 mΩ 3.0 < 50 mΩ 2.25 measuring condition: 10 mA / 20 mV Electrical endurance 02 4.5 3.38 0.45 145 140 Electrical Contact category 0 at contact application 0 CC0 03 5.0 3.75 0.50 178 140 endurance (≤ 30 mV / ≥ 10 mA) min.Ê2.5ÊxÊ106Êoperations (≤ 30mV / ≤ 10mA) 06 12.0 9.00 1.20 1029 140 cable load open end min. 2.5x106 operations min.Ê2.0ÊxÊ106Êoperations All figures are given for coil without pre-energization, at ambient temperature +23°C cable load open end min. 2.0x106 operations Resistive load at 125 Vdc / 0.24 A - 30 W 5 Êoperations min.Ê5ÊxÊ10 resistive, 125VDC / 0.24A - 30W 5x105 operations at 220 Vdc / 0.27 A - 60min. W min.Ê1ÊxÊ105Êoperations at 250 Vac / 0.25 A - 62.5 resistive, 220 VDC / 0.27A - 60W min. 1x105 operations Insulation C* min.Ê1ÊxÊ105Êoperations VA 5 min.Ê5ÊxÊ105Êoperations resistive, 250VAC / 0.25A - 62.5VA min. 1x10 operations at 30 Vdc / 1 A - 30 W min.Ê1ÊxÊ105Êoperations 5 resistive, 30VDC / 1A - 30W at 30 Vdc / 2 A - 60 W min. 5x10 operations Mechanical endurance typ.Ê108Êoperations resistive, 30VDC / 2A - 60W min. 1x105 operations Coil operating range UL contact ratings Contact data (continued) UL contact rating 30VDC, 2A, 60W, NO only 220 Vdc / 0.24 A - 60 W 125 Vdc / 0.24 A - 30 W 250 Vac / 0.25 A - 62.5 VA 125 Vac / 0.5 A - 62.5 VA 30 Vdc / 2 A - 60 W high Max. DC Load Breaking Capacity Max. DC load breaking capacity DC Voltage [Vdc] resistive load DC current [A] All specifications subject to change. Consult Tyco Electronics for latest specifications. 01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 21 of 28 Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Signal Relays AXICOM Assignment IM - B RelayTerminal (Continued) Relay – top view Non-Latching Type Latching Type, 1 Coil dielectric version Terminal assignment not energized condition Initial dielectric strength TOP view on relay between open contacts 2500Vrms between contact and coil 3500Vrms IM-B, 1 form A (NO) Initial surge withstand voltage between open contacts 3500V between contact and coil 4900V Terminal Assignment Initial insulation resistance Relay – topinsulated view between elements >109Ω Capacitance Non-Latching Type Latching Type, 1 Coil between open contacts max. 1pF notbetween energized condition reset condition contact and coil max. 2pF between adjacent contacts max. 2pF reset condition Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use. *this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength enhancement, SF6 is hermetically sealed in relay without leaks to air during normal application as recommended per the applicable product specification. It is clarified that the usage of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer for further information and detailed material declaration. All specifications subject to change. Consult Tyco Electronics for latest specifications. RF Data Isolation at 100MHz/900MHz Insertion loss at 100MHz/900MHz Voltage standing wave ratio (VSWR) at 100MHz/900MHz 37.0dB/18.8dB 0.03dB/0.33dB 1.06/1.49 Dimensions Other Data 0.4 5.4±0.15 3.2 3.2 0.4 5.4±0.15 5.08±0.1 H T T1 T2 D1 D2 Tw S 5.65ÊÐÊ0.20 3.2 N/A 5.08ʱÊ0.10 3.20ʱÊ0.15 5.08±0.1 2.20ʱÊ0.15 0.40 0.75 H T T1 T2 D1 D2 Tw S 5.65ÊÐÊ0.20 0.222ÊÐÊ0.008 3.2 0.125 N/A N/A 5.08ʱÊ0.10 0.200ʱÊ0.004 3.20ʱÊ0.15 0.126ʱÊ0.006 2.20ʱÊ0.15 0.087ʱÊ0.006 0.40 0.015 0.75 0.029 Holelayout Layout Mounting HoleMounting LayoutPCB 0.222ÊÐÊ0.008 ÊÊ5.65ÊÐÊ0.20 0.125 N/A N/A 7.50ʱÊ0.30 0.200ʱÊ0.004 5.08ʱÊ0.10 0.126ʱÊ0.006 3.20ʱÊ0.15 0.087ʱÊ0.006 2.20ʱÊ0.15 0.015 0.4 0.029 N/A ÊÊ5.65ÊÐÊ0.20 0.222ÊÐÊ0.008 N/A 7.50ʱÊ0.30 0.295ʱÊ0.011 5.08ʱÊ0.10 0.200ʱÊ0.004 3.20ʱÊ0.15 0.126ʱÊ0.006 2.20ʱÊ0.15 0.087ʱÊ0.006 0.4 0.015 N/A 0.222ÊÐÊ0.008 N/A 0.295ʱÊ0.011 0.4 0.200ʱÊ0.004 5.4±0.15 0.126ʱÊ0.006 Coplanarity ≤0.1mm 0.087ʱÊ0.006 0.015 N/A 0.4 5.08±0.1 5.65-0.2 0.75 5.65-0.2 0.75 5.65-0.2 All specifications subjectEU to change. Consult TycoRoHS, Electronics for latest specifications. Material compliance: RoHS/ELV, China REACH, Halogen content THT version Standard version 12 of 28 refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40°C to +85°C Thermal resistance < 150K/W Category of environmental protection IEC 61810 RT V - hermetically sealed Degree of protection IEC 60529 IP 67, immersion cleanable Vibration resistance (functional) 20g, 10 to 500Hz 108-98001 R 108-98001 Rev. M AXICOMÊSignalÊRelays AXICOMÊSignalÊRelays Shock resistance (functional), half sinus 11ms 50g Shock resistance (destructive), half sinus 0.5ms 500g IM-A Relay 1 Pole / 1/ Form / SPST NC IM-A Relay 1 Pole Break / 1 Break Form B SPST B NC Weight max. 0.75g Resistance to soldering heat THT SMT version Gull wings IM-A Dimensions in mm DimensionsDimensions IM-A Dimensions in mm IEC 60068-2-20 265°C/10s Resistance to soldering heat SMT IEC 60068-2-58 265°C/10s THT VersionTHT Version SMT VersionSMT Version Moisture sensitive level, JEDEC J-Std-020D MSL3 Standard Version Standard Version Ultrasonic cleaning not recommended IMÊTHT IMÊSMT IMÊTHT IMÊSMT Packaging/unit Standard GullÊWings Standard GullÊWings mm inch mm inch mm inch mm inch THT version tube/50pcs., box/1000 pcs. 10.0±0.08 10.0±0.08 6.0±0.08 6.0±0.0 10.0±0.08 10.0±0.08 6.0±0.08 6.0±0.08 10.00ʱÊ0.08 0.393ʱÊ0.003 10.00ʱÊ0.08 0.393ʱÊ0.003 L 10.00ʱÊ0.08 L 0.393ʱÊ0.003 10.00ʱÊ0.08 0.393ʱÊ0.003 SMT version reel/1000 pcs., box/1000 or 5000 pcs. 6.00ʱÊ0.08 0.236ʱÊ0.003 ÊÊ6.00ʱÊ0.08 0.236ʱÊ0.003 W 6.00ʱÊ0.08 W 0.236ʱÊ0.003 ÊÊ6.00ʱÊ0.08 0.236ʱÊ0.003 5.4±0.15 7.5±0.3 Coplanarity ≤0.1mm 5.08±0. 7.5±0. Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm Solder Pad Layout Solder Pad Layout TOP view on component side of PCB View onto the component the PCB (top view) View onto the component the PCB (top view View onto the component side of the PCBside (topofview) View onto the component side of the PCBside (topofview) THT mounting holes 2 01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company SMT - solder pads Terminal Assignment Terminal Assignment Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secRelay –terms top view according to IEC 61810-1 andRelay to be– used of the disclaimer and all chapters of tion, application notes and all specifications top view only together with the ‘Definitions’ section. Non-Latching the ‘Definitions’ are subject to change. Type section, available at Non-Latching Type Latching Type,Latching 1 Coil Type, 1 Coil http://relays.te.com/definitions not energized condition not energized condition reset conditionreset condition Dottedline: processlimits Temperature °C Temperature °C 240°C 180°C Packing 130°C 180°C 100°C 130°C Dimensions in forced cooling forced Signal Relays AXICOM cooling 100°C AXICOMÊSignalÊRelays Vapor Phase Soldering: Temperature/Time Profile IM - B Relay (Continued) (Lead and Housing Peak AXICOMÊSignalÊRelays Temperature) IM Relay Time (s) IM Relay Vapor Phase Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Processing Recommended soldering Time (s) conditions Packing Packing Packing Recommended Reflow Soldering Profile Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020D Tube for THT version 50 relays per tube, 1000 relays per box Recommended Reflow Soldering Profile Temperature °C Temperature °C Tube for THT version 50 relays per tube 1,000 relays per box Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Time (s) Time (s) Resistance to Soldering Heat - Reflow Infrared Profile Soldering: temperature/ Resistance to soldering heat - Reflow profile time profile (lead and housing peak temperature) 1,00 Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Tape and reel for SMT version 1000 relays per reel, 1000 or 5000 relays per box Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box Resistance to Soldering Heat - Reflow Profile Temperature °C Temperature °C Tube fo Tub 50 relay 50re r 1,000 Reel Dimension Tape an 1,000 re Tap 1,000 o Infrared Soldering: Temperature/Time Profile Reel Dimension (Lead and Housing Peak Temperature) Infrared Soldering: Temperature/Time Profile Reel dimensions (Lead and Housing Peak Temperature) Time (s) Time (s) Recommended reflow soldering profile 1,00 1,00 Reel Dimension Reel Dimension All specifications subject to change. Consult Tyco Electronics for latest specifications. 25 of 28 All specifications subject to change. Consult Tyco Electronics for latest specifications. All specifications subject to change. Consult Tyco Electronics for latest specifications. 25 of 28 All specifications subject to change. Consult Tyco Electronics for latest specifications. Vapor Phase Soldering: temperature/time profile (lead and housing peak temperature) All specifications subject to change. Consult Tyco Electronics for latest specifications. All specifications subject to change. Consult Tyco Electronics for latest specifications. 01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3 Signal Relays AXICOM IM - B Relay (Continued) Product code structure IM Typical product code B 03 G R Type IM Signal Relays IM Series IMA/IMB Contact arrangement B 1 form A, 1 NO Coil Coil code: please refer to coil versions table Performance type Blank Standard version Terminals T THT - standard Packing S Tube Product code IMB01CGR IMB01CTS IMB02CGR IMB02CTS IMB03CGR IMB03CTS IMB04CGR IMB06CGR IMB06CTS IMB07CGR IMB07CTS IMB42CGR IMB42CTS 4 Arrangement 1 form A, 1 NO contact C High Dielectric Version G SMT-gull wing R Reel Perf. type High dielectric Coil 3VDC Coil type Monostable 4.5VDC 5VDC 6VDC 12VDC 24VDC 4.5VDC Bistable Terminals SMT gull wing THT standard SMT gull wing THT standard SMT gull wing THT standard SMT gull wing THT standard SMT gull wing THT standard SMT gull wing THT standard Part number 1462041-1 1462041-4 1462041-2 1462041-5 1462041-7 1462041-8 1462041-9 1462041-3 1462041-6 1-1462041-3 1-1462041-4 1-1462041-6 1-1462041-5 01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.