ILLUMINATION LUXEON 3535L Line High efficacy in a 3535 package with full range of CCTs and CRIs The LUXEON 3535L Line delivers optimized performance in combination with the Quality of Light needed for distributed light source applications. In addition to offering specified correlated color temperature and color rendering combinations, LUXEON 3535L Line is available in three performance levels. These LEDs boast the efficacy and reliability required by the indoor and outdoor illumination markets. FEATURES AND BENEFITS PRIMARY APPLICATIONS Supports ENERGY STAR lumen maintenance certification requirements Architectural Maximum drive current of 200mA delivers superior lumens for reduced LED count Downlights 1/7th ANSI color binning delivers tight color control High Bay & Low Bay Enables Ts points of 105°C which allows for higher board temperature Indoor Area Lighting Full range of CCTs and CRI configurations for design flexibility Lamps UL-recognized component [E352519] Specialty Lighting Spotlights DS203-L LUXEON 3535L (Legacy) Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved. No. E352519 Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Efficacy Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON 3535L Line LEDs are tested and binned with a 20ms monopulse of 100mA at a junction temperature, Tj, of 25°C. Part Number Nomenclature Part numbers for LUXEON 3535L Line follow the convention below: M X A B - P W C C - D E E E Where: B – designates minimum CRI (7=70CRI, 8=80CRI and 9=85CRI or 90CRI) C C – designates nominal ANSI CCT (30=3000K and 40=4000K) D – designates product family in standard parts (0 or 9=LUXEON 3535L, S=LUXEON 3535LS) E E E – designates options for detailed product specification Therefore, the following part number is used for a LUXEON 3535L 3000K 80CRI: M X A 8 - P W 3 0 - 0 0 0 1 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3535L Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON 3535L Line at 100mA and 65mA, Tj=25ºC. TYPICAL LUMINOUS EFFICACY (lm/W) TYPICAL LUMINOUS FLUX (lm) 44 147 30 158 MXA7-PW40-S001 38 44 147 30 158 MXA7-PW50-S001 70 38 44 147 30 158 MXA7-PW57-S001 70 38 46 154 31 166 MXA7-PW65-S001 2200K 80 26 30 100 20 108 MXA8-PW22-S001 2500K 80 26 32 107 22 116 MXA8-PW25-S001 2700K 80 30 38 127 26 137 MXA8-PW27-S001 3000K 80 30 39 130 26 141 MXA8-PW30-S001 3500K 80 30 41 137 28 148 MXA8-PW35-S001 4000K 80 34 43 144 29 155 MXA8-PW40-S001 5000K 80 34 43 144 29 155 MXA8-PW50-S001 5700K 80 30 42 140 28 151 MXA8-PW57-S001 6500K 80 30 42 140 28 151 MXA8-PW65-S001 2700K 85 30 33 110 22 119 MXA9-PW27-S111 4000K 85 24 32 107 22 116 MXA9-PW40-S111 2700K 90 26 32 107 22 116 MXA9-PW27-S001 3000K 90 26 32 107 22 116 MXA9-PW30-S001 4000K 70 40 49 161 33 176 MXA7-PW40-0000 5000K 70 40 49 161 33 176 MXA7-PW50-0000 5700K 70 40 49 161 33 176 MXA7-PW57-0000 6500K 70 40 47 155 32 168 MXA7-PW65-0000 2200K 80 28 33 109 22 117 MXA8-PW22-0000 2500K 80 28 34 112 23 121 MXA8-PW25-0000 2700K 80 36 44 145 30 156 MXA8-PW27-0000 3000K 80 34 44 145 30 156 MXA8-PW30-0000 3500K 80 34 44 145 30 156 MXA8-PW35-0000 4000K 80 36 46 151 31 163 MXA8-PW40-0000 5000K 80 36 47 155 32 167 MXA8-PW50-0000 5700K 80 36 45 148 30 160 MXA8-PW57-0000 6500K 80 36 45 148 30 160 MXA8-PW65-0000 2700K 85 32 36 119 24 128 MXA9-PW27-0000 4000K 85 34 40 132 27 142 MXA9-PW40-0000 2700K 90 31 36 119 24 128 MXA9-PW27-9000 3000K 90 31 36 119 24 128 MXA9-PW30-0000 LUMINOUS FLUX [3] (lm) NOMINAL MINIMUM PRODUCT CCT [1] CRI [2] MINIMUM 4000K 70 38 5000K 70 5700K 6500K TYPICAL 100mA LUXEON 3535LS LUXEON 3535L TYPICAL LUMINOUS EFFICACY (lm/W) PART NUMBER 65mA Notes for Table 1: 1. Correlated color temperature is based upton mounted die on highly reflective surface at Tj=25°C. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 3. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 3 Optical Characteristics Table 2. Optical characteristics for LUXEON 3535L Line at 100mA, Tj=25ºC. PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2] MXAx-xxxx-xxxx 140° 115° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON 3535L Line at 100mA, Tj=25ºC. FORWARD VOLTAGE [1] (Vf) MINIMUM TYPICAL MAXIMUM TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE (mV/°C) [2] MXAx-PWxx-S001 2.8 3.0 3.4 -2.0 to -4.0 22 MXAx-PWxx-0000 2.8 3.0 3.4 -2.0 to -4.0 18 PART NUMBER TYPICAL THERMAL RESISTANCE — JUNCTION TO SOLDER PAD (°C/W) Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C and 110°C. Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON 3535L Line. PARAMETER MAXIMUM PERFORMANCE DC Forward Current [1,2] Peak Pulsed Forward Current LED Junction Temperature [1] 200mA [1,3] (DC & Pulse) 240mA 125°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2 Operating Case Temperature [1] -40°C to 105°C LED Storage Temperature -40°C to 105°C Soldering Temperature JEDEC 020D 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) [4,5] -5V Notes for Table 4: 1. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current 2. At 10% duty cycle with pulse width of 10ms. 3. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 4. LUXEON 3535L LEDs are not designed to be driven in reverse bias. 5. At maximum reverse current of 10µA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 4 Characteristic Curves Spectral Power Distribution Characteristics Figure 1a. Typical normalized power vs. wavelength for LUXEON 3535L 70CRI White at 100mA, Tj=25ºC. Figure 1b. Typical normalized power vs. wavelength for LUXEON 3535L 80CRI White at 100mA, Tj=25ºC. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 5 Figure 1c. Typical normalized power vs. wavelength for LUXEON 3535L 90CRI White at 100mA, Tj=25ºC. Light Output Characteristics Figure 2. Typical normalized light output vs. junction temperature for MXAx-PWxx, Tj=25ºC. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 6 Figure 3. Typical normalized light output vs. forward current for MXAx-PWxx, Tj=25ºC. Forward Current Characteristics Figure 4. Typical forward current vs. forward voltage for MXAx-PWxx, Tj=25ºC. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 7 Radiation Pattern Characteristics Figure 5. Typical radiation pattern for LUXEON 3535L at 100mA, Tj=25ºC. Figure 6. Typical polar radiation pattern for LUXEON 3535L at 100mA, Tj=25ºC. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 8 Efficacy Characteristics Figure 7. Typical normalized efficacy vs. forward current for MXAx-PWxx at 100mA, Tj=25ºC. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 9 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON 3535L Line LEDs are labeled using a 4 or 5-digit alphanumeric CAT code following the format below: Where: A B C D or A x B C D A – designates luminous flux bin (example: M=36 to 40 lumens, R=48 to 52 lumens) x – designates internal Lumileds code B C – designates color bin (example: 7Z, 71, 72, 73, 74, 75, 76) for 3000K parts D designates forward voltage bin (example: S=2.70 to 2.80V, T=2.80 to 2.90V) – Therefore, a LUXEON 3535L with a lumen range of 48 to 52, color bin of 7Z and a forward voltage range of 2.70 to 2.80V has the following CAT code: R7ZS Luminous Flux Bins Table 5 lists the standard photometric luminous flux bins for LUXEON 3535L Line emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON 3535L Line. BIN LUMINOUS FLUX [1] (lm) MINIMUM MAXIMUM J 24 28 K 28 32 L 32 36 M 36 40 P 40 44 Q 44 48 R 48 52 S 52 56 T 56 60 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 10 Color Bin Definitions 0.4400 0.4300 A3 A5 A1 0.4200 y 0.4100 A2 A4 A6 0.4000 0.3900 0.4800 0.4850 0.4900 0.4950 0.5000 0.5050 0.5100 0.5150 0.5200 0.5250 0.5300 x Figure 8. 3-step MacAdam ellipse illustration for Table 6. Figure 9a. Color bin structure for LUXEON 3535L Line 2200K. Table 6a. Color bin definitions for LUXEON 3535L Line for MXAx-PW22-xxxx. BIN A1 A2 A3 x y 0.5178 0.4362 0.4996 0.4158 0.5262 0.4381 0.5075 0.4176 0.5154 0.4194 0.4972 0.3990 0.5075 0.4176 0.4897 0.3974 0.5075 0.4176 0.5010 0.4323 0.5154 0.4194 0.5046 0.4007 BIN A4 A5 x y 0.5094 0.4343 0.4996 0.4158 0.4972 0.3990 0.4917 0.4140 0.5094 0.4343 0.4917 0.4140 0.5178 0.4362 0.4996 0.4158 0.5075 0.4176 0.4996 0.4158 A6 0.4897 0.3974 0.4823 0.3957 Notes for Table 6a: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and If=100mA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 11 0.4350 0.4300 0.4250 93 95 91 0.4200 0.4150 y 0.4100 96 0.4050 94 92 0.4000 0.3950 0.3900 0.4550 0.4600 0.4650 0.4700 0.4750 0.4800 0.4850 0.4900 0.4950 0.5000 0.5050 x Figure 9b. Color bin structure for LUXEON 3535L Line 2500K. Table 6b. Color bin definitions for LUXEON 3535L Line for MXAx-PW25-xxxx. BIN 91 92 93 x y 0.4944 0.4322 0.5010 0.4323 BIN 94 x y 0.4774 0.4134 0.4845 0.4137 0.4917 0.4140 0.4746 0.3952 0.4845 0.4137 0.4670 0.3948 0.4845 0.4137 0.4813 0.4319 0.4917 0.4140 0.4879 0.4320 0.4823 0.3957 0.4774 0.4134 95 0.4746 0.3952 0.4703 0.4132 0.4879 0.4320 0.4703 0.4132 0.4944 0.4322 0.4845 0.4137 0.4774 0.4134 96 0.4774 0.4134 0.4670 0.3948 0.4593 0.3944 Notes for Table 6b: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and If=100mA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 12 0.4450 0.4350 0.4250 81 83 85 0.4150 8Z y 0.4050 82 84 86 0.3950 2580K 2870K 0.3850 0.3750 0.4300 0.4350 0.4400 0.4450 0.4500 0.4550 0.4600 0.4650 0.4700 0.4750 0.4800 0.4850 0.4900 x Figure 9c. Color bin structure for LUXEON 3535L Line 2700K. Table 6c-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW27-xxxx. BIN 81 82 83 x y BIN 0.4625 0.4113 0.4729 0.4299 0.4813 0.4319 0.4625 0.4113 0.4703 0.4132 0.4520 0.3927 0.4520 0.3927 0. 4468 0.4077 0.4625 0.4113 0. 4562 0.4260 0.4703 0.4132 0.4646 0.4280 84 85 x y 0.4446 0.3910 0.4546 0.4095 0.4593 0.3944 0.4546 0.4095 0.4546 0.4095 0.4373 0.3893 0.4646 0.4280 0.4729 0.4299 0.4625 0.4113 86 0.4468 0.4077 0.4546 0.4095 0.4446 0.3910 Table 6c-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW27-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 8Z (0.4578, 0.4101) 0.0081 0.0042 53.70º Notes for Tables 6c-1 and 6c-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and If=100mA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 13 0.4400 0.4300 0.4200 71 73 0.4100 75 y 7Z 0.4000 76 72 74 0.3900 2870K 3200K 0.3800 0.3700 0.4050 0.4100 0.4150 0.4200 0.4250 0.4300 0.4350 0.4400 0.4450 0.4500 0.4550 0.4600 0.4650 x Figure 9d. Color bin structure for LUXEON 3535L Line 3000K. Table 6d-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW30-xxxx. BIN 71 72 73 x y x y 0.4386 0.4474 0.4048 0.4222 0.3840 0.4228 0.4305 0.4019 0.4562 0.4260 0.4386 0.4048 0.4468 0.4077 0.4298 0.3867 0.4298 0.3867 0.4223 0.3990 0.4386 0.4048 0.4468 0.4077 BIN 74 75 0.4299 0.4165 0.4387 0.4197 0.4373 0.3893 0.4305 0.4019 0.4305 0.4019 0.4147 0.3814 0.4387 0.4197 0.4223 0.3990 0.4305 0.4019 0.4222 0.3840 0.4474 0.4228 0.4386 0.4048 76 Table 6d-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW30-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 7Z (0.4338, 0.403) 0.00834 0.00408 53.22º Notes for Tables 6d-1 and 6d-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and If=100mA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 14 0.4300 0.4200 0.4100 61 63 0.4000 65 y 6Z 0.3900 62 64 0.3800 3250K 66 0.3700 3750K 0.3600 0.3800 0.3850 0.3900 0.3950 0.4000 0.4050 0.4100 0.4150 0.4200 0.4250 0.4300 0.4350 0.4400 x Figure 9e. Color bin structure for LUXEON 3535L Line 3500K. Table 6e-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW35-xxxx. BIN 61 62 63 x y 0.4130 0.3944 0.4198 0.4115 0.4299 0.4165 BIN 64 x y 0.3975 0.3731 0.4036 0.3898 0.4130 0.3944 0.4223 0.3990 0.4061 0.3773 0.4061 0.3773 0.3943 0.3853 0.4130 0.3944 0.3996 0.4015 65 0.4223 0.3990 0.4097 0.4065 0.4147 0.3814 0.4036 0.3898 0.4036 0.3898 0.3889 0.3690 0.4097 0.4065 0.3943 0.3853 0.4198 0.4115 0.4036 0.3898 0.4130 0.3944 0.3975 0.3731 66 Table 6e-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW35-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 6Z (0.4073, 0.3917) 0.00927 0.00414 54.00º Notes for Tables 6e-1 and 6e-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and If=100mA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 15 0.4200 0.4100 0.4000 51 53 0.3900 y 55 5Z 0.3800 52 54 0.3700 3750K 56 0.3600 4250K 0.3500 0.3600 0.3650 0.3700 0.3750 0.3800 0.3850 0.3900 0.3950 0.4000 0.4050 x Figure 9f. Color bin structure for LUXEON 3535L Line 4000K. Table 6f-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW40-xxxx. BIN 51 52 53 x y 0.3869 0.3829 0.3916 0.3987 0.4006 0.4044 BIN 54 x y 0.3746 0.3624 0.3786 0.3777 0.3869 0.3829 0.3952 0.3880 0.3822 0.3670 0.3822 0.3670 0.3703 0.3726 0.3869 0.3829 0.3736 0.3874 0.3952 0.3880 0.3826 0.3931 0.3898 0.3716 0.3786 0.3777 0.3786 0.3777 0.3670 0.3578 0.3826 0.3931 0.3703 0.3726 0.3916 0.3987 0.3786 0.3777 0.3869 0.3829 0.3746 0.3624 55 56 Table 6f-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW40-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 5Z (0.3818, 0.3797) 0.00939 0.00402 53.72º Notes for Tables 6f-1 and 6f-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and If=100mA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 16 0.3900 0.3800 0.3700 31 33 y 0.3600 35 3Z 0.3500 32 34 4750K 36 0.3400 5250K 0.3300 0.3300 0.3350 0.3400 0.3450 0.3500 0.3550 0.3600 x Figure 9g. Color bin structure for LUXEON 3535L Line 5000K. Table 6g-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW50-xxxx. BIN 31 32 33 x y 0.3479 0.3580 0.3493 0.3712 0.3551 0.3760 BIN 34 x y 0.3416 0.3408 0.3425 0.3536 0.3479 0.3580 0.3533 0.3624 0.3465 0.3448 0.3465 0.3448 0.3371 0.3493 0.3479 0.3580 0.3376 0.3616 0.3533 0.3624 0.3434 0.3664 0.3515 0.3487 0.3425 0.3536 0.3425 0.3536 0.3366 0.3369 0.3434 0.3664 0.3371 0.3493 0.3493 0.3712 0.3425 0.3536 0.3479 0.3580 0.3416 0.3408 35 36 Table 6g-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW50-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 3Z (0.3447, 0.3553) 0.00822 0.00354 59.62º Notes for Tables 6g-1 and 6g-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and If=100mA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 17 0.3700 0.3600 21 23 0.3500 25 y 2Z 22 0.3400 5250K 24 26 0.3300 6000K 0.3200 0.3100 0.3150 0.3200 0.3250 0.3300 0.3350 0.3400 0.3450 x Figure 9h. Color bin structure for LUXEON 3535L Line 5700K. Table 6h-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW57-xxxx. BIN 21 22 23 x y 0.3319 0.3446 0.3320 0.3565 0.3376 0.3616 0.3371 BIN x y 0.3270 0.3285 0.3267 0.3399 0.3319 0.3446 0.3493 0.3318 0.3327 0.3318 0.3327 0.3215 0.3353 0.3319 0.3446 0.3207 0.3462 0.3371 0.3493 0.3263 0.3513 0.3366 0.3369 0.3267 0.3399 0.3267 0.3399 0.3222 0.3243 0.3263 0.3513 0.3320 0.3565 0.3319 0.3446 24 25 26 0.3215 0.3353 0.3267 0.3399 0.3270 0.3285 Table 6h-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW57-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 2Z (0.3287, 0.3417) 0.00746 0.0032 59.09° Notes for Tables 6h-1 and 6h-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and If=100mA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 18 0.3650 0.3550 0.3450 11 13 0.3350 12 1Z 15 y 0.3250 6000K 14 16 0.3150 7000K 0.3050 0.2950 0.2950 0.3000 0.3050 0.3100 0.3150 0.3200 0.3250 0.3300 x Figure 9i. Color bin structure for LUXEON 3535L Line 6500K. Table 6i-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW65-xxxx. BIN 11 12 13 x y 0.3158 0.3317 0.3146 0.3422 0.3206 0.3481 BIN 14 x y 0.3119 0.3162 0.3103 0.3263 0.3158 0.3317 0.3213 0.3371 0.3170 0.3212 0.3170 0.3212 0.3048 0.3209 0.3158 0.3317 0.3028 0.3304 0.3213 0.3371 0.3087 0.3363 0.3221 0.3261 0.3103 0.3263 0.3103 0.3263 0.3068 0.3113 0.3087 0.3363 0.3048 0.3209 0.3146 0.3422 0.3103 0.3263 0.3158 0.3317 0.3119 0.3162 15 16 Table 6i-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW65-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 1Z (0.3123, 0.3282) 0.00669 0.00285 58.57° Notes for Tables 6i-1 and 6i-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and If=100mA. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 19 Forward Voltage Bins Table 7. Forward voltage bin definitions for LUXEON 3535L Line. FORWARD VOLTAGE [1] (Vf) BIN MINIMUM MAXIMUM S 2.70 2.80 T 2.80 2.90 V 2.90 3.00 W 3.00 3.10 X 3.10 3.20 Y 3.20 3.30 Notes for Table 7: 1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements. 2. Tested and binned at 25ºC and If=100mA. Mechanical Dimensions Figure 10. Mechanical dimensions for LUXEON 3535L. Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 20 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25ºC to Peak JEDEC J-STD-020D Time Figure 11. Visualization of the acceptable reflow temperature profile as specified in Table 8. Table 8. Reflow profile characteristics for LUXEON 3535L Line. PROFILE FEATURE LEAD-FREE ASSEMBLY Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 to 120 seconds Ramp-Up Rate (TL to Tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 9. Moisture sensitivity levels for LUXEON 3535L Line. LEVEL 2 FLOOR LIFE SOAK REQUIREMENTS STANDARD TIME CONDITIONS TIME CONDITIONS 1 Year ≤30°C / 60% RH 168 Hours +5 / -0 85°C / 60% RH DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 21 Solder Pad Design 2.60 2.40 0.82 1.02 Solder mask 0.25 0.65 0.30 Stencil Top copper Package geometric center 1.93 1.80 Package and pad outlines 2.13 0.50 0.50 Figure 12. Recommended PCB solder pad layout for LUXEON 3535L Line. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Packaging Information 3,95±0,1 5,5±0,05 1,2±0,1 12+0,3 -0,1 2±0,05 ,1 +0 5 -0 1, 4±0,1 1,75±0,1 Pocket Tape Dimensions 3,8±0,1 ,25 +0 0 1,5 - 8±0,1 0,28±0,02 Figure 13. Pocket tape dimensions for LUXEON 3535L Line. Notes for Figure 13: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 22 Reel Dimensions 329 100 +/-0.5 13,1 +0,5 -0,2 18.4 (max, measure at hub) 1.5 n mi +2 12,4-0 Figure 14. Reel dimensions for LUXEON 3535L Line. Notes for Figure 14: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved. 23 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com. ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.