Plastic Film Capacitors Metallized Polyester Film Capacitor Type: ECQUG[Class X1] In accordance with UL/CSA and European safety regulation class X1 Features Equipped with a safety mechanism • •Flame-retardant plastic case and non combustible resin •RoHS directive compliant Recommended Applications Interference suppressors • Explanation of Part Numbers 1 2 3 4 5 6 E C Q U 3 A Product code Dielectric & construction Rated vol. 7 8 Capacitance 9 10 11 M G 12 Cap. Tol. Suffix M ±20 % Blank A Applicable Standard UL CSA Europe International Approval UL60384-14 CAN/CSA E60384-14 EN60384-14 IEC60384-14 Class Class X1 Class X1 Class X1 Class X1 Suffix Straight Cut lead Certification organization UL CSA NEMKO ❈ When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUG, 0.1 µF. ❈ Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No.. ❈ European standards marking are NEMKO only. But, there are no problem using this capacitor in a device which will get approvals from certification bodies in Europe, VDE, FIMKO, SEMKO, DEMKO, and SEV etc. except VDE and FIMKO. Specifications Category temp. range -40 ˚C to +100 ˚C Rated voltage 300 VAC Capacitance range Capacitance tolerance 0.010 µF to 1.0 µF (E6) ±20 % (M) Dissipation factor (tan ) tan < =1.0 % (20 ˚C, 1 kHz) Withstand voltage Between terminals : 575 VAC, 1768 VDC, 60 s Between terminals to enclosure : 2100 VAC, 60 s Insulation resistance (IR) >15000 MΩ (20 ˚C, 100 VDC, 60 s) C< =0.33 µF : IR= > C>0.33 µF : IR=5000 MΩ · µF (20 ˚C, 100 VDC, 60 s) >2000 MΩ (20 ˚C, 500 VDC, 60 s) IR= ❈ Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave). Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. − FC80 − Plastic Film Capacitors ■Dimensions in mm (not to scale) A B Note Date Code. ■Rating & Dimensions ● Capacitance tolerance : ±20 %(M) Q 0±0.5 1.3 5.0 11.5 12.5 0.60 0±0.5 1.3 15.0 5.0 11.5 12.5 0.60 0±0.5 1.3 ECQU3A333MG( ) 0.033 ECQU3A473MG( ) 0.047 15.0 6.0 13.0 12.5 0.60 0±0.5 1.3 15.0 6.0 13.0 12.5 0.60 0±0.5 1.3 ECQU3A683MG( ) 0.068 ECQU3A104MG( ) 0.10 15.0 8.0 15.0 12.5 0.60 0±0.5 1.3 15.0 8.0 15.0 12.5 0.60 0±0.5 1.3 ECQU3A154MG( ) 0.15 ECQU3A224MG( ) 0.22 ECQU3A334MG( ) 0.33 18.0 8.0 16.5 15.0 0.80 0±0.5 1.3 18.0 9.0 17.5 15.0 0.80 0±0.5 1.3 26.0 9.0 18.5 22.5 0.80 0±0.5 1.5 ECQU3A474MG( ) 0.47 ECQU3A684MG( ) 0.68 ECQU3A105MG( ) 1.0 26.0 10.5 20.0 22.5 0.80 0±0.75 1.5 26.0 12.5 22.0 22.5 0.80 0±0.75 1.5 27.0 16.5 25.5 22.5 0.80 0±0.75 2.2 Cap. (µF) L T ECQU3A103MG( ) 0.010 ECQU3A153MG( ) 0.015 ECQU3A223MG( ) 0.022 15.0 15.0 ↑ ↑ H Suffix for lead form Cap. tol. code Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. − FC81 − Min. order Q'ty 500 Interference Suppressor P 5.0 Dimensions (mm) F φd 0.60 12.5 11.5 Part No.