Document 587-1 Shielded Power Inductors – LPS6235 Series • Low DCR; high current; shielded construction • Perfect for backlight applications Designer’s Kit C345 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 460 – 480 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 350/7″reel; 1500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.68 mm pocket depth Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm PCB washing Only pure water or alcohol recommended Isat (A) DCR SRF Inductance2 max3 typ4 10% 20% 30% ±20% (µH) (Ohms) (MHz) drop drop drop 5 Part number1 LPS6235-682ML_ LPS6235-822ML_ LPS6235-103ML_ LPS6235-123ML_ LPS6235-153ML_ LPS6235-183ML_ LPS6235-223ML_ LPS6235-333ML_ LPS6235-473ML_ LPS6235-563ML_ LPS6235-683ML_ LPS6235-823ML_ LPS6235-104ML_ LPS6235-124ML_ LPS6235-154ML_ LPS6235-224ML_ LPS6235-334ML_ LPS6235-474ML_ LPS6235-564ML_ LPS6235-684ML_ LPS6235-824ML_ LPS6235-105ML_ LPS6235-155ML_ LPS6235-185ML_ LPS6235-225ML_ LPS6235-335ML_ LPS6235-475ML_ LPS6235-565ML_ LPS6235-685ML_ LPS6235-825ML_ LPS6235-106ML_ 6.8 8.2 10.0 12.0 15.0 18.0 22.0 33.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 220.0 330.0 470.0 560.0 680.0 820.0 1000.0 1500.0 1800.0 2200.0 3300.0 4700.0 5600.0 6800.0 8200.0 10000.0 0.075 0.095 0.100 0.110 0.125 0.140 0.145 0.180 0.245 0.280 0.345 0.315 0.375 0.435 0.535 0.720 1.02 1.58 1.75 1.97 2.70 3.20 4.60 5.42 6.40 8.90 14.0 16.4 21.4 24.0 29.0 55 48 37 29 25 24 24 16 13 12 10.8 10.0 9.0 8.3 7.3 5.6 4.4 3.6 3.1 2.8 2.5 2.2 1.9 1.7 1.5 1.1 0.94 0.86 0.80 0.70 0.61 2.6 2.5 2.3 1.9 1.9 1.7 1.6 1.3 1.1 1.0 0.90 0.46 0.46 0.44 0.37 0.31 0.26 0.22 0.20 0.17 0.16 0.14 0.12 0.11 0.090 0.080 0.070 0.070 0.070 0.062 0.059 2.7 2.6 2.4 2.2 2.0 1.8 1.7 1.4 1.2 1.0 0.94 0.52 0.52 0.48 0.43 0.36 0.29 0.25 0.22 0.19 0.18 0.17 0.13 0.12 0.11 0.090 0.077 0.080 0.075 0.070 0.067 2.8 2.7 2.5 2.3 2.0 1.9 1.7 1.5 1.2 1.1 0.96 0.55 0.54 0.51 0.45 0.37 0.30 0.26 0.23 0.21 0.19 0.18 0.14 0.13 0.11 0.10 0.084 0.085 0.080 0.078 0.074 Irms (A)6 20°C 40°C rise rise 1.30 1.30 1.28 1.25 1.22 1.20 1.10 1.00 0.80 0.75 0.73 0.72 0.70 0.60 0.53 0.45 0.40 0.36 0.33 0.28 0.26 0.24 0.19 0.18 0.16 0.14 0.12 0.10 0.090 0.085 0.075 1.90 1.85 1.80 1.75 1.70 1.65 1.60 1.30 1.15 1.07 1.00 0.95 0.90 0.80 0.73 0.64 0.55 0.50 0.46 0.40 0.33 0.30 0.26 0.23 0.22 0.180 0.150 0.130 0.120 0.115 0.095 1. Please specify termination and packaging codes: LPS6235-106MLC Termination: L= RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C= 7″ machine-ready reel. EIA-481 embossed plastic tape (350 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Document 587-1 Revised 10/17/08 Document 587-2 Shielded SMT Power Inductors – LPS6235 Series Typical L vs Current Typical L vs Frequency 10000 10000 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 330 µH 100 µH 100 33 µH 10 µH 10 1 0.01 1000 µH 1000 Inductance (µH) 1000 Inductance (µH) 3300 µH 1 0.1 10 1 0.01 1 0.1 Current (A) 10 Frequency (MHz) Typical Current Derating 0.236 ±0.003* 6,00 ±0,076 0.236 ±0.003* 6,00 ±0,076 100 XXX X 90 80 70 Dash number 60 Winding direction Internal code 50 40 30 20 Isat Irms 10 0 -40 -20 0 0.138 max 3,50 25°C Percent of rated current 120 110 20 Recommended Land Pattern 40 60 80 100 120 140 0.079 2,00 0.165 4,20 Ambient temperature (°C) 0.039 typ 1,00 0.260 0.167 6,60 4,25 0.039 typ 1,00 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. Dimensions are in 0.071 1,80 0.079 2,00 0.167 4,25 0.260 6,60 inches mm Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 0.165 4,20 Document 587-2 Revised 10/17/08