EC600/EC601 SERIES ECLIPSE MINI - LED 6” POST-TOP/WALL TYPE: QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE WATTAGE VOLTAGE FINISH 1- Heavy cast aluminum top cover with integral LED heat dissipating pad. 2- One piece .090” (2.3) thick hard aluminum top shade. Underside surface is painted white enamel to optimize light performance (EC601 only). 3- Set of 4 X 1/2” (13) solid aluminum struts. 4- Cast aluminum upper electrical housing. 5- Cast aluminum lower electrical chamber housing. 1 2 3 4 OPTION OPTION OPTION OPTION EC600 EC600-EC6WS EC601 EC601-EC6W 5 MATERIALS CERTIFICATION Eclipse Mini is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. The lower cast aluminum housing fits with a 4” or 5” (102 or 127) pole and contains all electrical controls on a removable tray. Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request. Rated IP65. ELECTRICAL LED DRIVER LED Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), optional 347V on request, minimum operating temperature of -30ºC/-22ºF, output over voltage protection, output over current protection, output short circuit protection with auto-recovery, and over temperature protection (110ºC). Type III & V light distribution via high performance optical lenses. Standard 4000K /80CRI. Optional 2700K, 3000K and 3500K. Removable modular LED platform. Optional Amber LED for turtle sensitive areas. Wavelengths: 584.5nm to 597nm. 20” (508) 8.7” (221) 22.2” (564) 22.2” (564) EC600 EPA: 0.63 LIFE EC601 EPA: 0.68 60,000hrs L86B50 (based on IESNA TM-21 Test Method and LM-80 data). 139,000hrs L70B50 (calculated projection from LM-80 data). FINISH Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. MOUNTING LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. June 2017 Rev 0 Maximum weight: 9.11lbs (4.1kg) Standard luminaire mounts on a 4” or 5” (102 or 127) pole. Alternate wall and pole attachments are proposed with high quality components to meet multiple installation conditions. LUMINIS.COM 1 EC600/EC601 SERIES ECLIPSE MINI - LED TYPICAL PHOTOMETRY SUMMARY Descriptive Information Descriptive Information EC600-L1W48r0-R3 EC601-L1W48r0-R3 EC600-L1W48r0-R5 EC601-L1W48r0-R5 Total Lms: 4684 Lumens Total Input Watts: 49.3 W Source: LED Efficacy: 95.0 Lumens/Watt BUG: B2-U0-G2 CCT/CRI: 4000K/80 Maximum Candela: 2668 @ 75ºH/65ºV Total Lms: 4646 Lumens Total Input Watts: 50.1 W Source: LED Efficacy: 92.7 Lumens/Watt BUG: B3-U0-G3 CCT/CRI: 4000K/80 Maximum Candela: 2083 @ 65ºV Please visit our web site www.luminis.com for complete I.E.S. formatted download data. LUMINAIRE SELECTION LED LIGHT SELECTION (4000K/80CRI) MODEL# INPUT DELIVERED WATTS LUMENS VOLTAGE FINISH STANDARD COLORS MODEL Type III 19W 34W 49W 1869 3294 4684 EC600-L1W18r1-R3 EC600-L1W30r1-R3 EC600-L1W48r0-R3 EC601-L1W18r1-R3 EC601-L1W30r1-R3 EC601-L1W48r0-R3 Type V 19W 34W 50W 1830 3221 4646 EC600-L1W18r1-R5 EC600-L1W30r1-R5 EC600-L1W48r0-R5 EC601-L1W18r1-R5 EC601-L1W30r1-R5 EC601-L1W48r0-R5 EC600 1 120V 277V Optional 347V WHT BKT BZT MST GRT DGT CHT Snow white Jet black Bronze Matte silver Titanium gray Gun metal Champagne OPTIONAL COLORS AMBER LED LIGHT SELECTION INPUT DELIVERED WATTS LUMENS EC601 17W 388 CS Custom color RAL RAL# color MODEL EC600-L1W18K2A (Refer to color chart) EC601-L1W18K2A OPTIONS MOUNTING FS PH 347L Fuse2 Photocell2 347V input power driver AW6 EC6P 2EC6P LIGHT Alternate CCT ºK LED (LCF: Lumen conversion factor) K27 K3 K35 AC6 2AC6 2700K CCT 80 CRI (LCF: 0.91) 3000K CCT 80 CRI (LCF: 0.94) 3500K CCT 80 CRI (LCF: 0.98) NOTE: Other CCT & higher CRI available, please consult factory. EC6W EC6PS 2EC6PS EC6WS TN3 PR6 ACCESSORIES Pole mount attachment with 45º support Double pole mount attachments with 45º support at 180º Wall mount attachment with 45º support Pole mount attachment with arm Double pole mount attachment with arms at 180º Wall mount attachment with arm Pole mount attachment with short arm (EC600 only) Double pole mount attachment with short arms at 180º (EC600 only) Wall mount attachment with short arm (EC600 only) 3” Tenon pole adaptor3 Pedestal mount adaptor BLC Back light control4 NOTES 1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.) 3- 3” tenon pole adaptor only required for 3” O.D. poles by others. 4- BLC: Back Light Control - Type II Distribution. LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 2 June 2017 Rev 0 ELECTRICAL EC600/EC601 SERIES ECLIPSE MINI - LED POLE MOUNT 20.5” (521) 9.5” (241) 13” (330) 11” 30” (762) (279) 22.2” (564) 22.2” (564) Power feed Power feed EC6P (Applicable for EC600 and EC601) 1” X 2” (25x51) extruded aluminum side pole straight mounting. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.97) EC6PS (Applicable for EC600 only) 1” X 2” (25x51) extruded aluminum side pole straight mounting. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.72) Power feed AC6 1” X 2” (25x51) extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5” dia. poles. 1/2” dia. X 45º standard natural stainless steel rod support. (EPA: 0.7) 2AC6 Double pole mount attachments with 45º support at 180º 22.2” (564) 2EC6P Double pole mount attachment with arms at 180º NOTE: 2EC6PS Double pole mount attachment with short arms at 180º (EC600 only) PST pole with AC6 or 2AC6 attachment requires a 30” (762) tenon extension over pole nominal height. EC6P, 2EC6P, EC6PS and 2EC6PS require an 18” tenon extension. Factory installed. 6” Dia. (152) base 4.7” (119) dia. Bolt circle 26.7” (680) 6” (152) dia. Base PR6 6” Dia. X 26.7” H. extruded aluminum stand designed for short walls or pier mount. MATCHING POLE SELECTION Tapered Pole Ø 4” Height PAA410 PAA510 PST10 ------- PSB10 10 Ft. (3 M) PAA412 PAA512 PST12 ------- PSB12 12 Ft. (3,6 M) PAA414 PAA514 PST14 ------- PSB14 14 Ft. (4,2 M) PAA416 PAA516 PST16 PTA16 PSB16 16 Ft. (4,8 M) PAA418 PAA518 ------- PTA18 PSB18 18 Ft. (5,5 M) PAA420 PAA520 ------- PTA20 PSB20 20 Ft. (6,0 M) ------- ------- ------- PTA25 ------- 25 Ft. (7,6 M) For additional pole details, please refer to separate pole specification sheet. Ø 4”= 102mm Ø5”= 127mm PSB Pole series LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. PST Pole series PAA Pole series PTA Pole series LUMINIS.COM 3 June 2017 Rev 0 Ø 4” Ø 5” Ø 4” EC600/EC601 SERIES ECLIPSE MINI - LED WALL MOUNT 13” (330) 20.5” (521) 9.5” (241) 22.2” (564) 11” (279) 22.2” (564) 22.2” (564) Power feed Power feed Power feed AW6 1” X 2” (25X51) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia. X 45º standard natural stainless steel rod support. EC6W (Applicable for EC600 and EC601) 1” X 2” (25X51) extruded aluminum wall mount arm with cast aluminum wall plate. Mounting EC6WS (Applicable for EC600 only) 1” X 2” (25X51) extruded aluminum wall mount arm with cast aluminum wall plate. Mounting 3” (76) 4.625” (118) 11” (279) Mounting 3” (76) 3” (76) 4.625” (118) 4.625” (118) Power feed Power feed LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 4 June 2017 Rev 0 Power feed