Chokes for Power Lines B82614 Sine-Wave Chokes Rated voltage 250 Vac Rated current 0,8 to 2,7 A Rated inductance 0,5 to 3,0 mH Construction ■ ■ ■ ■ Choke consisting of rectangular ferrite core with air gap Closed polycarbonate coil former with 4 sections Without encapsulation One winding Features ■ Coil former flame-retardant as per UL 94 V-0 ■ Recycleable owing to omission of encapsulation and glue Applications ■ Switch-mode power supplies with current pump ■ Reduced harmonics input current Terminals ■ Pins 0,7 × 0,7 mm ■ Lead spacing 15 × 12,5 mm Marking Manufacturer, ordering code, rated current, rated inductance, rated current 12,5±0,2 Dimensional drawing and pin configuration 15±0,2 21 max. 8,1 max. 3+0,5 31 max. 23,3 max. 32,5 max. 0,7 SSB1389-V 330 04/00 Chokes for Power Lines B82614 Sine-Wave Chokes General technical data Rated inductance LR Measured with HP 4275 A or HP 4284 A; Measuring frequency: L ≤ 1 mH = 100 kHz L > 1 mH = 10 kHz Inductance tolerance ± 30 % DC resistance Rtyp Typical values, measured at 20°C Rated voltage VR 250 Vac / 350 Vdc Climatic category In accordance with IEC 60068-1 40/125/56 (– 40 °C/+ 125 °C/56 days damp heat test) Standards The chokes comply with EN 60938-2 und VDE 0565-2 Weight Approx. 30 g Current derating Iop/IR versus ambient temperature TA SSB1102-8 1,4 IΙop B IΙRR 1,2 1,0 0,8 0,6 0,4 0,2 0 0 20 40 60 80 100 C 140 TA Characteristics and ordering codes IR A LR mH Rtyp Ω Ordering code 0,8 1,0 1,7 2,0 2,4 2,7 3,0 2,0 1,5 1,0 0,75 0,5 2,0 1,3 0,62 0,42 0,29 0,23 B82614-R2801-A30 B82614-R2102-A30 B82614-R2172-A30 B82614-R2202-A30 B82614-R2242-A30 B82614-R2272-A30 331 04/00