FR201 THRU FR207 2.0AMP. Fast Recovery Rectifiers VOLTAGE:50 TO 1000V CURRENT:2.0A AXIAL LEAD DO-15 Specification Features: Case: Epoxy, Molded Weight: 0.4Gram (Approximately) DEVICE MARKING DIAGRAM High current capability, Low leakage current FR20X KEL High surge current capability Finish: All External Surfaces Corrosion Resistant And Terminal Leads Are Readily Solderable Lead And Mounting Surface Temperature For Soldering Purposed: 260℃ Max. For 10 Seconds 1/16 Inch From Case FR20X : Device Name FR201~ FR207 KEL RoHS Compliant Cathode Indicated By Polarity Band Absolute Maximum Ratings Parameter Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectifier Current. (0.375” Lead Length @ TA=75℃) Non-repetitive Peak Forward Surge Current. (8.3mS Single Half Sine-wave) Operating Junction and Storage Temperature Range Thermal Resistance (Junction to Ambient) (Note 1) Electrical Characteristics TA = 25°C unless otherwise noted FR FR FR Symbol 201 202 203 : KEL Logo FR 204 FR 205 FR 206 FR 207 Units VRRM 50 100 200 400 600 800 1000 V VR 50 100 200 400 600 800 1000 V IF(AV) 2.0 A IFSM 60 A TJ, TSTG -65 to +150 °C RθJA 50 °C/W TA = 25°C unless otherwise noted Parameter Symbol FR 201 FR 202 FR 203 FR 204 FR 205 FR 206 FR 207 Units Reverse Current @VR IR 5 uA Forward Voltage @2A VF 1.3 V Maximum Reverse Recovery Time (Note 2) TRR Total Capacitance @VR=4V, f=1MHz CT 150 250 25 500 nS pF Apr. 2008 Release / Orig Page 1 FR201 through FR207 Series P re lim in ary Da t a S he et P re lim in ary Da t a S he et NOTE: (1) Thermal resistance from junction to ambient at 0.375” lead length, vertical P.C. board mounted (2) Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Package Outline Package Case Outline D C A B DO-15 DO-15 DIM Millimeters Inches Min Max Min Max A 0.70 0.90 0.028 0.034 B 5.80 7.60 0.230 0.300 C 25.40 --- 1.000 --- D 2.60 3.60 0.104 0.140 Apr. 2008 Release / Orig Page 2