PRODUCT DATASHEET Angelette series last update 20/12/2016 DETAILS Product Number FCN15104_ANGELETTE-M-RZ-CXA15-18 Family Angelette Type RefPack Color metal Diameter 110 mm Height 57,3 mm Style round Optic Material PC Holder Material Fastening Status production ready ROHS Comliant Yes Date Updated 20/12/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector CXA/B 15xx 50 deg Medium 85 % 1.100 - CXA/B 1816 & CXA/B 1820 & CXA 1850 51 deg Medium 85 % 1.100 - May 23rd 2017 8:27 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H 4 NOTE: Customer may add additional light modifying parts to Angelette family(excluding the plain versions): Minumum height of additional part is 1.5mm and maximum is 2.2mm. Diameter is 105.9mm 0.3 4 ANGELETTE-M 10 6 57.26 + Basepart 1 1 0 3 Additional part: F15176_ANGELETTE-LENS F15412_ANGELETTE-DL 3 Section view A-A 2 2 6.5 Additional part: F13671_ANGE-RZ-LENS Front view Top view ANGELETTE-M-PLAIN Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE Datasheet_ANGELETTE-M SIZE A3 SCALE H G PART NUMBER 1 ANGELETTE-M ANGELETTE-M-PLAIN 1:1 WEIGHT SHEET B A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.