Designed and Manufactured in Germany Specification Oscillator type: Rev.: 2 Date: 2014-07-09 AXIOM10-23 High Stability SMD OCXO with HCMOS Output Parameter min. Nominal frequency Frequency stability Initial tolerance @ +25°C vs. operating temperature range operating temperature range vs. supply voltage variation vs. load change Long term (aging) per day Long term (aging) per year Frequency adjustment range Electronic Frequency Control (EFC) EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Phase noise Short-term stability (Allan Deviation) Warm-up time Reference voltage VREF output Supply voltage VS Current consumption (steady state) Current consumption (warm-up) Operable temperature range Storage temperature range Enclosure (see drawing) (LxWxH) Weight Packing ESD Sensitivity Handling and Testing Processing typ. max. 40.000 Condition MHz -40 ±0.5 0 Unit 2.5 Positive ±100 ±50 +85 ±3 ±3 ±1 ±100 ppb ppb °C ppb ppb ppb ppb 5.0 ppm V 100 @ VC = 2.5 V steady state VS ±5% Load ±5% after 30 days operation after 30 days operation kΩ HCMOS 10 kΩ || 15 pF 10 60 -100 -125 -135 -140 -11 5·10 3 40 11.4 5.0 12.0 -45 -55 12.6 120 250 +90 +105 ns % dBc/Hz dBc/Hz dBc/Hz dBc/Hz min V V mA mA °C °C 25.6x22.2x14 max. mm 10 g Tape & Reel 1500 V In accordance with AXAN-011 In accordance with AXAN-012 @ VS/2 @ 10 Hz @ 100 Hz @ 1 kHz @ 10 kHz τ = 1 sec ∆ffinal/f0 < ±0.1 ppm @ +25°C IEC 61837 CO 28 IEC 60286-3 HBM as in IEC 61000-4-2 www.axtal.com www.axtal.com Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Ordering Code: Model (Specification) AXIOM10-23 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Revision Rev.2 Frequency [MHz] 40.000 AXIOM10-23 Rev.2 Drawing D2 Page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing: Pin connections Pin # 1 2 3 4 5 6 7 Symbol VC VREF VS RF OUT N.C. N.C. GND Function Control Voltage (EFC) Reference Voltage Supply Voltage RF Output No Connection No Connection Ground Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 2-20 2-58 4.6.3 2-27 4.6.8 Test conditions Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Revision History Rev. Drawing Date [dd.mm.yyyy] 2 2 2 D0 D1 D2 31.10.2012 23.11.2012 09.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Current consumption changed, new package drawing Marking added Editorial changes, customer marking deleted AXIOM10-23 Rev.2 Drawing D2 Page 2(2) Author Checked BN BN HH BN BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]