Hirose MDF12A-1822PCF Crimp contact for direct joining thick wire pcb Datasheet

Crimp Contact for Direct Joining Thick Wire PCB
Thick Wire Crimp Contact for Direct Soldering to PCB
MDF12/27 Series
Features
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
1. Allows for direct soldering of wires to the PCB
The MDF12 and MDF27 eliminates the traditional
crimp housing/receptacle combination by crimping
the contact on to the wire and then directly soldering
it to the PCB. This improves assembly times and
connection reliability.
Has temporary PCB hold retention ability which allows
for easier soldering and helps to reduces labor costs.
The contact crimps both around the center
conductor and the jacket. The jacket crimp prevents
breakage or damage to the center conductor at the
solder joint by transferring stress to the jacket
portion of the terminated wire.
2. Vertical and right angle versions
The MDF12 contact is designed for when a vertical
connection to the PCB is needed. Please use the
MDF27 contact for applications that require a right
angle orientation.
3. Supports larger gauge wires and higher
current ratings
The MDF12 and MDF27 can be used with wire diameters
ranging from 22 to 14 AWG and provides for a current
capacity of up to 15 A when using 14 AWG.
Contacts are suitable for use with readily available
UL1007 and UL1015 wire types.
Product specifications
Rated current
(Note 1)
Rated value
Rated voltage
Items
14 AWG : 15A
16 AWG : 10A
18 AWG : 9A
20 AWG : 5A
22 AWG : 5A
300V AC
Operating temperature range
-35 to 85 ç (Note 2)
Operating humidity range
20 to 80 %
Storage temperature range
-10 to 60 ç (Note 3)
Storage humidity range
40 to 70 % (Note 3)
Specifications
1. Crimp Contact
resistance
2. Vibration
resistance
3. Moisture
resistance
15 mø min.
Conditions
Measured at 100 mA
No damaged or loosened parts.
No damaged or loosened parts.
Frequency: 10 to 55 Hz; half amplitude: 0.75 mm,
in 3 directions for 2 hours
Left for 96 hours at a temperature of 40 ç ±2 ç and with
humidity of 90 to 95 %
4. Temperature
cycle
No damaged or loosened parts.
(-55 ç for 30 minutes→ 5 to 35 ç for 10 minutes→ 85 ç
for 30 minutes→ 5 to 35 ç for 10 minutes) in 5 cycles
for 5 cycles
5. Solder heat
resistance
No loosening affecting the performance.
Flow: 250 ç for
10 seconds
Hand soldering: soldering iron
temperature 300 ç for 3 seconds
Note 1: The rated current differs depending on the wire size used.
Note 2: Includes the temperature rise when energized.
Note 3: Storage described here indicates the long-term-storage of unused items before they are mounted on PCB.
Operating humidity range applies to the non-energized state after the items are mounted on PCB.
Material
Product
Component
Material
Finish
Crimping contact
Contact
Brass
Tin plating
Note: Our tin plating process helps prevent whiskering.
2015.4
1
MDF12/27 Series●Crimp Contact for Direct Joining Thick Wire PCB Thick Wire Crimp Contact for Direct Soldering to PCB
Product Number Structure
Contact
MDF 12 A - 1822 PCF
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Series Name: MDF
Series No.
12: Right angle type
27: Coplanar type
Jacket outer diameter type
None: For jacket diameters from 1.5 to 2.2 mm
(UL1007-equivalent)
A
: For jacket diameters from 2.1 to 2.9 mm
(UL1015-equivalent)
Applicable wire size
1822: 18 to 22 AWG
1416: 14 to 16 AWG
State type/packaging type
PCF: plug contact/reel
PC : plug contact/loose pieces
MDF12 Series
Part No.
HRS No.
MDF12-1822PCF
MDF12-1822PC
MDF12A-1822PCF
MDF12A-1822PC
MDF12-1416PCF
MDF12-1416PC
MDF12A-1416PCF
MDF12A-1416PC
Note: Dimensions for the 14 to 16
AWG MDF12 contact is shown above.
Applicable wire
Jacket outer
AWG
diameter
547-0196-9
547-0221-4 18 to 22
547-0208-6 AWG
547-0222-7
547-0209-9
----------14 to 16
547-0210-8 AWG
547-0224-2
Type
5,000 pcs/reel
100 pcs/pack
3,500 pcs/reel
100 pcs/pack
2,500 pcs/reel
100 pcs/pack
2,500 pcs/reel
100 pcs/pack
1.5mm to
2.2mm
2.1mm to
2.9mm
2.4mm to
2.7mm
2.6mm to
3.6mm
A
B
dimension dimension
9.4
3.2
11.2
3.6
+0.1
0
●Recommended through-hole diameter on PCB 1.8
●Applicable thickness of the PCB 1.6
MDF27 Series
Part No.
HRS No.
Applicable wire
Jacket outer
AWG
diameter
MDF27-1822PCF 547-0286-0
MDF27-1822PC
----------18 to 22
AWG
MDF27A-1822PCF ----------MDF27A-1822PC
----------MDF27-1416PCF
----------MDF27-1416PC
----------14 to 16
MDF27A-1416PCF 547-0296-3 AWG
MDF27A-1416PC
-----------
1.5mm to
2.2mm
2.1mm to
2.9mm
2.4mm to
2.7mm
2.6mm to
3.6mm
Type
5,000 pcs/reel
100 pcs/pack
3,500 pcs/reel
100 pcs/pack
2,500 pcs/reel
100 pcs/pack
2,500 pcs/reel
100 pcs/pack
●Applicable thickness of the PCB is 1.6 mm
Recommended through-hole diameter
on PCB 1.8 +0.1
0
[I] side
[II] side
Applicable wire size
(tin-plated annealed copper wires)
Wire strip length
3.3 to 4.2 mm
Conductor size (construction)
14 AWG (41/0.25 mm)
16 AWG (26/0.254mm)
18 AWG (34/0.18mm)
20 AWG (21/0.18mm)
22 AWG (17/0.16mm)
Note: Please contact our Sales Dept. when using
wires other than those noted above.
2
MDF12/27 Series●Crimp Contact for Direct Joining Thick Wire PCB Thick Wire Crimp Contact for Direct Soldering to PCB
Applicable crimping tools
Type
Part No.
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Press body
901-4514-0
MDF12-1822PCF
AP105-MDF12A-1822P
901-4515-2
MDF12A-1822PCF
AP105-MDF12A-1416P
––––––––––––
901-4533-4
MDF12-1416PCF
MDF12A-1416PCF
AP105-MDF27-1822P
––––––––––––
MDF27-1822PCF
AP105-MDF27A-1822P
––––––––––––
MDF27A-1822PCF
AP105-MDF27-1416P
––––––––––––
MDF27-1416PCF
AP105-MDF27A-1416P
––––––––––––
MDF27A-1416PCF
CM-105
901-0005-4
––––––––––––
MDF12-TA1822HC
550-0238-0
MDF12-1822PC
MDF12A-TA1822HC
550-0239-2
MDF12A-1822PC
MDF12-TA1416HC
Manual crimping tools
Applicable contacts
AP105-MDF12-1822P
AP105-MDF12-1416P
Applicator
HRS No.
––––––––––––
MDF12-1416PC
MDF12A-TA1416HC
550-0237-7
MDF12A-1416PC
HT104/MDF27-1822P
––––––––––––
MDF27-1822PC
MDF27A-TA1822HC
––––––––––––
MDF27A-1822PC
MDF27-TA1416HC
––––––––––––
MDF27-1416PC
MDF27A-TA1416HC
––––––––––––
MDF27A-1416PC
Note 1: Issues caused by use of tools other than the ones designed or recommended by Hirose are not covered by warranty.
Note 2: Please contact our Sales Dept. When you are placing an order for products listed above that show no HRS Part Number.
Usage recommendations
1. Recommended soldering conditions
2. Cleaning conditions
3. Wire connecting conditions
■Flow conditions using an automatic soldering device: Soldering temperature:
250 ±5ç; soldering time: within 3 seconds
■Hand soldering conditions: Soldering iron temperature: 290 ±10ç; soldering
time: within 3 seconds
■After soldering, be sure not to disturb the connectors before they have
returned to their normal temperature because the coating presser part is likely
to be loosened when a load is applied on the cables while the connectors and
the cables are still heated.
Please refer to the "Handbook on the Use of Nylon Connectors".
Do not use solvents which will impair the cable jacket, such as trichloroethane.
Additionally, avoid heating cleaning using solvents.
Additionally, avoid using heated cleaning solvents.
Please refer to the "Handbook on the Use of Nylon Connectors".
3
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
MDF12/27 Series●Crimp Contact for Direct Joining Thick Wire PCB Thick Wire Crimp Contact for Direct Soldering to PCB
Powered by TCPDF (www.tcpdf.org)
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE
3255 Scott Boulevard, Building 7, Suite 101
Santa Clara, CA 95054
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE
580 Waters Edge Lane, Suite 205 Lombard IL
60148
Phone : +1-630-282-6701
Mail : [email protected]
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
17197 N. Laurel Park Drive, Suite 253, Livonia,
MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE
Muggenhofer Str. 136 90429 Nuernberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
Bayernstr. 3, Haus C 30855 Langenhagen, Germany
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
FRANCE:
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
Regus La Garenne Colombes,Place de La Belgique,
71 Boulevard National La Garenne Colombes, 92250, France
Phone : +33 (0) 1 7082 3170
Fax : +33 (1) 7082 3101
http://www.hirose.com/eu/
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose.com/cn/
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/cn/
CHINA:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose.com/cn/
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose.com/hk/
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose.com/tw/
KOREA:
HIROSE KOREA CO., LTD.
250, Huimanggongwon-ro, Siheung-si,
Gyeonggi-do, Korea, 429-849
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr/
SINGAPORE:
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
HIROSE ELECTRIC SINGAPORE PTE. LTD.
10 Anson Road #26-16, International Plaza Office NO.519, Regus-Green Boulevard, Level5, Tower C,
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
079903, Singapore
Phone : +91-12-660-8018
Phone : +65-6324-6113
Fax : +91-120-4804949
Fax : +65-6324-6123
http://www.hirose.com/sg/
http://www.hirose.com/sg/
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
MALAYSIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
1-10-07, Suntech @ Penang Cybercity (1164),Lintang
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.
Phone : +604-619-2564
Fax : +604-619-2574
http://www.hirose.com/sg/
®
4
THAILAND:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
Fax : +66-2-686-3433
http://www.hirose.com/sg/
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 04/2015. Contents are subject to change without notice for the purpose of improvements.
Similar pages