CM1263-06DE Low Capacitance ESD Protection for High-Speed Serial Interfaces Features • • • • • http://onsemi.com 6 Channels of ESD Protection 1 pF Loading Capacitance per Channel Typical ±8 kV ESD Protection (IEC 61000−4−2, Contact Discharge) ±15 kV ESD Protection (IEC 61000−4−2, Air Discharge) These Devices are Pb−Free and are RoHS Compliant UDFN12 DE SUFFIX CASE 517BD Applications • LCD and Camera Data Lines in Wireless Handsets that Use • • • • High−Speed Serial Interfaces such as MDDI, MIPI, MVI and MPL I/O Port Protection for Mobile Handsets, Notebook Computers, PDAs, etc. Wireless Handsets Handheld PCs/PDAs LCD and Camera Modules BLOCK DIAGRAM CH6 VP1 CH5 CH1 VN VN CH4 VP2 CH3 CH2 VN VN MARKING DIAGRAM JK12 MG G 1 JK12 M G = Specific Device Code = Month Code = Pb−Free Package (*Note: Microdot may be in either location) *Date Code orientation and/or position may vary depending upon manufacturing location. ORDERING INFORMATION Device Package Shipping† CM1263−06DE UDFN (Pb−Free) 3000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2013 September, 2013 − Rev. 5 1 Publication Order Number: CM1263−06DE/D CM1263−06DE PACKAGE / PINOUT DIAGRAM Table 1. PIN DESCRIPTIONS Pin Description 1 VN* 2 (CH1) ESD Channel #1 3 VN* 4 VN* 5 (CH2) ESD Channel #2 6 VN* 7 (CH3) ESD Channel #3 8 VP2 for Channels 2, 3, and 4 9 (CH4) ESD Channel #4 10 (CH5) ESD Channel #5 11 VP1 for Channels1, 5, and 6 12 (CH6) ESD Channel #6 DAP* Backside, GND Pad, VN* Top View (Pins Down View) 12 11 10 9 8 7 Pin 1 Marking JK12 1 2 3 4 5 6 Bottom View (Pins Up View) 1 2 3 4 5 6 GND PAD 12 11 10 9 8 7 12−Lead UDFN Package http://onsemi.com 2 CM1263−06DE SPECIFICATIONS Table 2. ABSOLUTE MAXIMUM RATINGS Parameter Rating Units 6.0 V Operating Temperature Range −40 to +85 °C Storage Temperature Range −65 to +150 °C (VN − 0.5) to (VP + 0.5) V Operating Supply Voltage (VP − VN) DC Voltage at any channel input Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Table 3. ELECTRICAL OPERATING CHARACTERISTICS (Note 1) Symbol Parameter Conditions Min Typ Max Units 3.3 5.5 V 8.0 mA VP Operating Supply Voltage (VP−VN) IP Operating Supply Current VP = 3.3 V, VN = 0 V (per VP pin) VF Diode Forward Voltage Top Diode Bottom Diode TA = 25°C, IF = 8 mA, VP = 3.3 V, VN = 0 V Channel Leakage Current TA = 25°C; VP = 3.3 V, VN = 0 V (Channel 1) 250 nA VP = 3.3 V, VN = 0 V (Channels 1−6) 1000 nA 1000 nA 1.2 pF ILEAK 0.60 0.60 0.80 0.80 0.95 0.95 V IR Reverse (Leakage Current) VP = floating; VN = 0 V (per channel) CIN Channel Input Capacitance At 1 MHz, VP = 3.3 V, VN = 0 V, VIN = 0 V 0.88 Channel Input Capacitance Matching At 1 MHz, VP = 3.3 V, VN = 0 V, VIN = 0 V 0.02 pF Mutual Capacitance between signal pin and adjacent signal pin At 1 MHz, VP = 3.3 V, VN = 0 V, VIN = 0 V 0.11 pF DCIN CMUTUAL VESD VCL RDYN ESD Protection Peak Discharge Voltage at any channel input, in system a) Contact discharge per IEC 61000−4−2 standard b) Air discharge per IEC 61000−4−2 standard kV TA = 25°C (Notes 2 and 3) ±8 ±15 Channel Clamp Voltage Positive Transients Negative Transients TA = 25°C, IPP = 1 A, tP = 8/20 mS (Note 3) Dynamic Resistance Positive Transients Negative Transients TA = 25°C, IPP = 1 A, tP = 8/20 mS Any I/O pin to Ground (Note 3) 1. All parameters specified at TA = –40°C to +85°C unless otherwise noted. 2. Standard IEC 61000−4−2 with CDischarge = 150 pF, RDischarge = 330 W, VP = 3.3 V, VN grounded. 3. These measurements performed with no external capacitor on VP (VP floating). http://onsemi.com 3 +9.96 –1.6 0.96 0.5 V W CM1263−06DE PACKAGE DIMENSIONS UDFN12, 2.5x1.35, 0.4P CASE 517BD ISSUE O A B D 2X 0.10 C PIN ONE REFERENCE 2X L1 ÉÉÉ ÉÉÉ 0.10 C DETAIL A E OPTIONAL CONSTRUCTIONS TOP VIEW DETAIL B (A3) A1 0.05 C NOTE 4 12X A1 SIDE VIEW 6 1 K 12 C SEATING PLANE DIM A A1 A3 b D D2 E E2 e K L L1 MOLD CMPD A3 DETAIL B OPTIONAL CONSTRUCTION MILLIMETERS MIN MAX 0.45 0.55 0.00 0.05 0.13 REF 0.15 0.25 2.50 BSC 1.90 2.10 1.35 BSC 0.30 0.50 0.40 BSC 0.15 −−− 0.20 0.30 −−− 0.05 DETAIL A D2 L ÇÇ ÇÇ ÉÉ EXPOSED Cu A 0.05 C 12X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.25 mm FROM THE TERMINAL TIP. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. L L 7 e RECOMMENDED SOLDERING FOOTPRINT* E2 12X PACKAGE OUTLINE b BOTTOM VIEW 2.20 12X 0.40 0.10 C A B 0.05 C NOTE 3 1.55 0.50 12X 0.40 PITCH 0.25 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative CM1263−06DE/D