Click on Series name for product info on aimtec.com Series AMLD-IZ Up to 2000mA | LED Driver FEATURES: High Power LED Driver Wide (7:1) Input Voltage Range Remote Control Function 24 Pin DIP Package or 2x1 Inch Package Types • • • • Models Single output Model Input Voltage (Vdc) Output Voltage (Vdc) 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 AMLD-3630IZ AMLD-3635IZ AMLD-3650IZ AMLD-3660IZ AMLD-3670IZ AMLD-3680IZ AMLD-3690IZ AMLD-36100IZ AMLD-36110IZ AMLD-36120IZ AMLD-36130IZ AMLD-36140IZ AMLD-36150IZ AMLD-36160IZ AMLD-36180IZ AMLD-36200IZ • • • • Constant Output Current High Efficiency (Up to 96%) PWM Digital Dimming Function (10 – 90%) Analogue Dimming Function (0 – 100%) ① Maximum Rated Current (mA) Efficiency Max (%) 300 350 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1800 2000 96 96 96 96 96 96 96 96 96 96 95 95 95 95 95 95 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless ①otherwise specified. Analogue dimming is not supported on 1.6A, 1.8A, 2.0A models Input Specifications Parameters Voltage range On/Off Control (Analog Control) Input voltage range (0-12Vdc) (Leave open if not used) Dimming Control (Digital Control) Dimming Control (Analog Control) Input voltage range (0-12Vdc)* (Leave open if not used) For models with 1.5A and below Nominal Typical 24 5-36 Maximum Units 36 VDC ON: Open or 0V> V <0.6V OFF: 0.6V> V <5V (1mA Max) Max PWM Frequency (10%~90%) 200Hz / 20KHz for all models 0-4.5V (1mA max) Analog Voltage (0%~100%) models: AMLD-3630IZ, AMLD-3635IZ, AMLD-3650IZ 0-6.5V (1mA max) Analog Voltage (0%~100%) models: AMLD-3660IZ, AMLD-3670IZ, AMLD-3680IZ, AMLD-3690IZ, AMLD-36100IZ, AMLD-36110IZ, AMLD-36120IZ NOTE: Exceeding 12Vdc on Dimming Control pin will damage the converter. Output Specifications Parameters Current accuracy Short Circuit protection Output Open Protection Max load capacitance Ripple & Noise General Specifications Parameters Switching frequency Operating temperature Storage temperature www.aimtec.com F 051e R12.Q Conditions 20MHz Bandwidth Conditions 100% load Typical Maximum Units ±2 Regulated at the rated current for each model No Load 100 300 Typical 260 Maximum % µF mV p-p 1.5MHz for 1.6A, 1.8A, 2.0A models -40 to +85 -40 to +70 (1.2A, 1.3A, & 1.5A, 1.6A, 1.8A, 2.0A models) -40 to +125 Tel: +1 514 620 2722 1 of 12 Units KHz o C o C Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver General Specifications (continued) Parameters Conditions Max Case temperature Cooling Thermal Impedance Humidity Case material Potting material Weight Typical Maximum Free Air Convection Units o 100 C o C/W % RH 95 Non-Conductive Black Plastic, Nickel-Coated Copper 1.3A, 1.4A & 1.5A models) Epoxy (Flammability UL94V-0) 12 g 1.25 × 0.80 × 0.40 inches / 31.80 × 20.30 × 10.20 mm 1.25 × 0.80 × 0.45 inches / 31.80 × 20.30 × 11.30 mm (1.3A, 1.4A, & 1.5A models) 1.99 x 0.99 x 0.37 inches / 50.70 x 25.30 x 9.55 mm (1.6A, 1.8A, 2.0A models) 13.17 Dimensions (L x W x H) Safety Specifications Parameters Agency approvals Standards CE EN 55022, class B EN55024 IEC 61000-4-2 (Perf. Criteria B) IEC 61000-4-3 (Perf. Criteria A) IEC 61000-4-6 (Perf. Criteria A) IEC 61000-4-8 (Perf. Criteria A) Pin Out Specifications Dimensions (0.3A to 1.2A models) Pin Single 1 Remote On/Off 2 -Vin 3 -Vin 9 NC 11 NC 14 LED + 16 LED 22 +Vin 23 +Vin 24 DIM NC: Not Connected Mechanical Tolerances Case tolerance ± 0.25mm or ± 0.01 inches Pin tolerance ± 0.05 or ± 0.002 www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 2 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Dimensions (1.3A, 1.4A, & 1.5A models) 31.80 (1.25) 1 2 3 11 9 20.30 (0.80) 15.24 (0.60) Bottom View 24 0.50 (0.02) 23 22 14 16 2.54 (0.1) 5.08 (0.2) 11.30 (0.45) 3.80 (0.15) 25.30 (0.99) Dimensions (1.6A, 1.8A, & 2.0A models) 50.70 (1.99) 2 1 2 3 4 5 5.60 (0.22) 9.55 (0.375) Pin 5 3 15.19 (0.60) Φ 1.00 (0.04) Bottom View 20.32 (0.80) 2.49 (0.098) 1 20.32 (0.80) 4 7.62 (0.30) 25.30 (0.99) 10.11 (0.40) 50.70 (1.99) Notes: All dimensions are typical in millimeters (inches). Pin Pitch Tolerance ±0.05 (±0.002) Case Tolerance ±0.25 (±0.01) Single +Vin -Vin Remote On/Off & PWM Dimming LED + LED - www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 3 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Efficiency versus Input Voltage Efficiency (%) 100 80 60 40 20 0 0 5 10 15 20 25 30 Input Voltage (V) Derating Free Air Convection Output Power (%) 100 AMLD-36130IZ AMLD-36140IZ AMLD-36150IZ AMLD-36160IZ AMLD-36180IZ AMLD-36200IZ 80 60 Safe Operating Area AMLD-3630IZ AMLD-3635IZ AMLD-3650IZ AMLD-3660IZ AMLD-3670IZ AMLD-3680IZ AMLD-3690IZ AMLD-36100IZ AMLD-36110IZ AMLD-36120IZ 40 20 0 - 40 - 20 0 20 40 60 70 Ambient Temperature www.aimtec.com F 051e R12.Q 85 80 100 ºC Tel: +1 514 620 2722 4 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Application Circuit + Vin 1st LED Dimming C1 0.01uF Dim If analogue DIM is not used C1 must be installed + Vin AMLD-IZ ON/OFF ON/OFF LED + LED - GND Leave Open if not used Last LED GND Note: The relation between input and output voltage for AMLD-IZ LED Driver step-down converter series is: Vin – 4V ≧ Vout ≧ Total LED voltage Vout / LED voltage = LED quantity Output Current versus Dimming Voltage Output Current vs VADJ AMLD-3630IZ ILED (mA) 350 300 301 250 221 200 150 147 100 76 50 2 0 0V 1V 2V 3V 4V 0 5V VADJ (V) www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 5 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Output Current versus Dimming Voltage (continued) Output Current vs VADJ AMLD-3635IZ ILED (mA) 400 365 350 300 284 250 210 200 150 138 100 61 50 0 5V 0 0V 1V 2V 3V 4V VADJ (V) Output Current vs VADJ AMLD-3650IZ ILED (mA) 600 500 520 407 400 300 287 200 181 100 68 0 0V 1V 2V 3V 4V 0 5V VADJ (V) www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 6 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Output Current versus Dimming Voltage (continued) Output Current vs VADJ AMLD-3660IZ ILED (mA) 700 629 600 500 485 400 348 300 220 200 100 87 0 0V 1V 2V 3V 0 5V 4V VADJ (V) Output Current vs VADJ AMLD-3670IZ ILED (mA) 800 700 711 600 570 500 432 400 300 297 200 163 100 23 0 0V 1V 2V 3V 4V 5V 0 6V VADJ (V) www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 7 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Output Current versus Dimming Voltage (continued) Output Current vs VADJ AMLD-3680IZ ILED (mA) 900 815 800 728 700 600 558 500 400 383 300 218 200 100 73 0 0V 1V 2V 3V 4V 5V 0 6V VADJ (V) Output Current vs VADJ ILED (mA) AMLD-3690IZ 1000 920 900 800 730 700 600 550 500 400 360 300 200 185 100 86 0 0V 1V 2V 3V 4V 5V 0 6V VADJ (V) www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 8 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Output Current versus Dimming Voltage (continued) Output Current vs VADJ AMLD-36100IZ ILED (mA) 1200 1020 1000 814 800 633 600 453 400 278 200 92 0 0V 1V 2V 3V 4V 5V 0 6V VADJ (V) ILED (mA) 1200 1000 Output Current vs VADJ AMLD-36110IZ 1110 900 800 705 600 517 400 317 200 105 0 0V 1V 2V 3V 4V 5V 0 6V VADJ (V) www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 9 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Output Current versus Dimming Voltage (continued) Output Current vs VADJ AMLD-36120IZ ILED (mA) 1400 1216 1200 1000 986 800 797 600 591 400 385 200 118 0 0V 1V 2V 3V 4V 5V 0 6V VADJ (V) www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 10 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Output Current versus Dimming Voltage (continued) www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 11 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMLD-IZ Up to 2000mA | LED Driver Output Current versus Dimming Voltage (continued) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.Q Tel: +1 514 620 2722 12 of 12 Toll free: + 1 888 9 AIMTEC (924 6832) North America only