HD74HC4066 Quad Analog Switches/Quad Multiplexers Description This switch has low “on” resistance and low “off” leakage. It is a bidirectional switch, thus any analog input may be used as an output and vice-versa. Also the HD74HC4066 switch contains linearization circuitry which lowers the “on” resistance and increases switch linearity. The HD74HC4066 device allows control of up to 12 V (peak) analog signals with digital control signals of the same range. Each switch has its own control input which disables each switch when low. Features • High Speed Operation • Wide Operating Voltage • Low Quiescent Supply Current Function Table Control Switch L OFF H ON GND ≤ Vin ≤ VCC GND ≤ Vout ≤ VCC HD74HC4066 Pin Arrangement In 1 1 Out 1 2 Out 2 3 14 VCC In C 13 Control 1 Out 12 Control 4 In In 2 Out C 4 11 In 4 C Control 2 5 Control 3 6 GND 7 Out In C In 10 Out 4 9 Out 3 8 In 3 Out (Top view) Logic Diagram (1/4) In/Out Control 2 Out/In HD74HC4066 Absolute Maximum Ratings Item Symbol Rating Unit Supply voltage VCC –0.5 to +7.0 V Control input voltage VIN –0.5 to VCC + 0.5 V Switch I/O voltage VI/O –0.5 to VCC + 0.5 V (VCC) I CC +50 mA (GND) I GND –50 mA Switch I/O current (per pin) I I/O ±25 mA Control input diode current I IK ±20 mA Switch I/O diode current I IOK ±20 mA Power dissipation PT 500 mW Storage temperature range Tstg –65 to +150 °C Supply current 3 HD74HC4066 DC Characteristics Ta = –40 to +85°C Ta = 25°C VCC (V) Min Typ Max Min Max Unit 2.0 1.5 — — 1.5 — V 4.5 3.15 — — 3.15 — 6.0 4.2 — — 4.2 — 2.0 — — 0.5 — 0.5 4.5 — — 1.35 — 1.35 6.0 — — 1.8 — 1.8 2.0 — 2000 5000 — 6250 Ω VC = VIH 4.5 — 100 200 — 250 Vin = 0 to VCC 6.0 — 60 170 — 210 Iin/out = 1 mA 2.0 — 50 — — — between any two 4.5 — 3 — — — between any two channels 6.0 — 2 — — — channels Item Symbol Control input voltage VIH VIL “ON” resistance ∆ON resistance RON ∆RON Test Conditions V Ω VC = VIH, Iin/out = 1 mA OFF channel leakage current (switch off) I S (OFF) 6.0 — — ±0.1 — ±1.0 µA VC = VIL VIN = VCC, Vout = GND or, Vin = GND, Vout = VCC OFF channel leakage current (switch on) I S (ON) 6.0 — — ±0.1 — ±1.0 µA VC = VIH Vin = VCC or GND Control input current Iin 6.0 — — ±0.1 — ±1.0 µA Vin = VCC or GND Quiescent supply current 6.0 — — 1.0 — 10.0 µA Vin = VCC or GND 4 I CC HD74HC4066 AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Ta = –40 to +85°C Ta = 25°C Item Symbol VCC (V) Min Typ Max Min Max Unit Test Conditions Propagation delay t PLH 2.0 — — 50 — 65 ns RL = 10 kΩ time t PHT 4.5 — 4 10 — 13 6.0 — — 9 — 11 2.0 — — 115 — 145 ns RL = 1 kΩ 4.5 — 10 23 — 29 6.0 — — 20 — 25 ns RL = 1 kΩ Output enable t ZH time Output disable t LZ 2.0 — — 115 — 145 time t HZ 4.5 — 14 23 — 29 6.0 — — 20 — 25 Sine wave distortion 4.5 — 0.05 — — — % RL = 10 kΩ, C L = 50 pF, f IN = 1 kHz Band width (–3 dB) 4.5 — 30 — — — MHz RL = 600 Ω, CL = 50 pF, 20 log 10 Vout/Vin = –3dB Feedthrouth attenuation 4.5 — –50 — — — dB RL = 600 Ω, CL = 50 pF, f IN = 1 MHz Cross talk between 2.0 — 25 — — — mA RL = 600 Ω, CL = 50 pF, control input to 4.5 — 60 — — — signal I/O 6.0 — 75 — — — Cross talk between any two switches 4.5 — –50 — — — dB RL = 600 Ω, CL = 50 pF, f IN = 1 MHz Maximum control 2.0 — 20 — — — MHz RL = 1 kΩ, C L = 15 pF, frequency 4.5 — 30 — — — 6.0 — 30 — — — f IN = 1 MHz Vout = 1/2 (VCC) Control input capacitance Cin — 5 10 — 10 pF Switch I/O capacitance Cin/out — 6 — — — pF Feed through capacitance Cin/out — 0.5 — — — pF Power dissipation capacitance CPD — 13 — — — pF 5 Unit: mm 19.20 20.32 Max 8 6.30 7.40 Max 14 1.30 7 2.54 ± 0.25 0.48 ± 0.10 0.51 Min 2.39 Max 2.54 Min 5.06 Max 1 7.62 + 0.10 0.25 – 0.05 0° – 15° Hitachi Code JEDEC EIAJ Weight (reference value) DP-14 Conforms Conforms 0.97 g Unit: mm 10.06 10.5 Max 8 5.5 14 1 0.10 ± 0.10 1.42 Max 1.27 *0.42 ± 0.08 0.40 ± 0.06 *0.22 ± 0.05 0.20 ± 0.04 2.20 Max 7 + 0.20 7.80 – 0.30 1.15 0° – 8° 0.70 ± 0.20 0.15 0.12 M *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Weight (reference value) FP-14DA — Conforms 0.23 g Unit: mm 8.65 9.05 Max 8 1 7 *0.20 ± 0.05 0.635 Max 1.75 Max 3.95 14 + 0.10 6.10 – 0.30 1.08 *0.40 ± 0.06 0.11 0.14 +– 0.04 0° – 8° 1.27 0.67 0.60 +– 0.20 0.15 0.25 M *Pd plating Hitachi Code JEDEC EIAJ Weight (reference value) FP-14DN Conforms Conforms 0.13 g Unit: mm 4.40 5.00 5.30 Max 14 8 1 7 0.65 0.20 ± 0.06 1.0 0.13 M 6.40 ± 0.20 0.10 *Dimension including the plating thickness Base material dimension *0.17 ± 0.05 0.15 ± 0.04 1.10 Max 0.83 Max 0.07 +0.03 –0.04 *0.22+0.08 –0.07 0° – 8° 0.50 ± 0.10 Hitachi Code JEDEC EIAJ Weight (reference value) TTP-14D — — 0.05 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.