OTS-1LC CWDM Wideband Optical Link DATASHEET | DECEMBER 2012 SATCOM 50 MHz to 3000 MHz CWDM Wideband Optical Link Optiva Wideband fiber-optic links are optimized to perform in the 50 to 3000 MHz frequency range providing transparent signal transportation for satellite antenna applications. The unique features of the OTS-1LC series include simple push button peaking for optimum performance and our patent-pending SmartGain™ Control, which ensures consistent performance over varied signal conditions. As with all EMCORE optical products, the highest quality components and modern production techniques insure that intra-facility links provide the highest Features 50 to 3000 MHz Optimized for IF, L and S-Band Satellite Signals Supports 20 km Links 8-Channel CWDM performance as a cost-effective alternative to coaxial cable. They provide much longer transmission distances than copper cables, simplify network design, ease installation and even enhance immunity from EMI, RFI and lightning. These transmitters and receivers take the high RF performance and diverse features of EMCORE’s Ortel technology and combine them into a compact package compatible with the Optiva family of OT-CC and OT-DTCR enclosures. 30dB Adjustable Gain Range Provides Perfect Level Match for Signal Distribution Unique Peak Optimizer and SmartGain™ Control System Design Optiva is a completely modular hot-swappable platform. Both 19” rack mount and compact tabletop or wall-mountable enclosures are available. The 19” 50 & 75 Ohm BNC or 50 Ohm SMA Tx & Rx RF Power Monitors Via LED, SMA & Remote rack-mount enclosure (Model OT-CC-16F-XXX) can support up to 16 insert cards and provides a single power supply (Model PS-200), or a dual-redundant, hot-swappable power supply option. Compact enclosures are available with 1, 2 or 6 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2) enclosures both use an external power supply (PS-9012) and optionally have LNB Power SNMP Monitoring and Control High-Dynamic-Range, Optically-Isolated DFB Lasers Run Cooler and Require Less Power Fits in Optiva enclosures, which support Daisy Chain™ Video, Audio and Data Links a standard 2-pin DC power connector for more custom applications. Like the OT-CC-16F the six-slot 1 RU enclosure (OT-CC-6) has hot swap redundant power supply. The Optiva family’s existing wide range of video, audio and data transport products include a unique Daisy-Chain™ feature that multiplexes multiple electrical inputs onto a single fiber, thus resulting in an extremely capable, yet conveniently flexible, signal transport system. Hot Swap Redundant Power Supplies Virtually Eliminate Downtime 16, 6, 2, & 1 Slot Enclosures Available CE & CSA Certified, ROHS © 2012 EMCORE Corporation | REV 2012.12 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. OTS-1LC CWDM Wideband Optical Link DATASHEET | DECEMBER 2012 SATCOM Performance Highlights Parameter Link Min Typical Max Units Frequency Range 50 Ohm 75 Ohm 50 50 - 3000 2500 MHz MHz Fiber Distance 0 - 20 Km dBo Optical Loss 0 - 8 -10 - 50 ˚C - 0 to -35 - dBm TX Gain (TG) at max, 1 GHz2 0 8 - dB (W/A) TG Adjustment Range (reduction from max) 30 - - dB Noise Figure (TG at max, 2150 MHz, 1dBo loss) Noise Figure (TG at min, 2150 MHz, 1dBo loss) 19 40 13 35 --- dB Air Temperature TX Typical S21 1 RF Input within SGC range Input IP3 -5 Spur Free Dynamic Range (1dBo loss) 100 103-108 - dB/Hz²/³ Wavelengths (See center Wavelength table for specific channel center) 1470 - 1610 nm - 10 12 10 - dB LNB Voltage Current 16 - 17 - 19 350 V mA Optical Power 3 4 5 dBmo DC Power LNB Off - 12 - 350 V mA Input Return Loss 50 - 200 MHz 950 - 2150 MHz 50 MHz - 3000 MHz RX dBm - -8 to -25 - dBm RX Gain (RG), at max, 1 GHz2 RF Output (Tx at peak, 1 dBmo into Rx) 20 22 - dB (A/W) RG Adjustment Range (reduction from max) 30 - - dB Output IP3 (2150 MHz) 20 25 - dBm Output 1dB compression (2150 MHz) - 15 - dBm Receiver Sensitivity - -20 - dBmo 10 15 - dB -12 -6 - 10 10 dBmo dBmo Output Return Loss 50 - 200 MHz 950 - 2150 MHz 50 MHz - 3000 MHz Optical Input Optimal 3.0 GHz 2 dB per division .05 GHz 3.5 GHz OTS-1L (TX & RX) 5.06 in. 128 mm 3 RU TX RX Enclosure Options OT-CC-16F 1. Wider RF inputs are acceptable, but will set the RF amp gain to its limit. 2. Link RF GaindB = TG + RG – 2*FiberLossdBo (assumes Rin = Rout) 3. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB OT-CC-6 OT-DTCR-1 © 2012 EMCORE Corporation | REV 2012.12 626-293-3400 [email protected] OT-DTCR-2 www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. OTS-1LC CWDM Wideband Optical Link DATASHEET | DECEMBER 2012 SATCOM Center Wavelengths Channel nm 47 1470 49 1490 51 1510 53 1530 - Wavelength compatible with DWDM and can be passed thru an EDFA 55 1550 - Wavelength compatible with DWDM and can be passed thru an EDFA 57 1570 59 1590 61 1610 Ordering Information Product Code Specifications OTS-1LCT/S5-XX03-SA-IC Transmitter, 50-3000 MHz, SMA 50 ohm, CWDM Channel XX, 3dBm (min), SC/APC OTS-1LCT/B5-XX03-SA-IC Transmitter, 50-3000 MHz, BNC 50 ohm, CWDM Channel XX, 3dBm (min), SC/APC OTS-1LCT/B7-XX03-SA-IC Transmitter, 50-2500 MHz, BNC 75 ohm, CWDM Channel XX, 3dBm (min), SC/APC OTS-1LR/S5-SA-IC Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC OTS-1LR/B5-SA-IC Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC OTS-1LR/B7-SA-IC Receiver, 50-2500 MHz, BNC 75 ohm, SC/APC OPV-CTLR-IC NMS SNMP Controller Card & MIB for Optiva Family OTP-1ETR-A2/A2 Optical Tcvr, 1Ch, Ethernet, SM, Dual LC OT-CC-16F-XXX Chassis, Rack Mount, 16 Slot, 3RU -- See OT-CC-16F data sheet for exact models PS-200-XX Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz -- See PS-200F data sheet for exact models OT-CC-6-1U Chassis, Rack Mount, 6 Slot, 1RU -- See OT-CC-6 data sheet for exact models OT-DTCR-1 / OT-DTCR-2 Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot © 2012 EMCORE Corporation | REV 2012.12 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. OTS-1LC CWDM Wideband Optical Link DATASHEET | DECEMBER 2012 SATCOM Laser Safety This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser product. This device has been classified with the FDA/CDRH under accession number 0220191. All Versions of this laser are Class 1M laser product, tested according to IEC 60825-1:2007 / EN 60825-1:2007 An additional warning for Class 1M laser products. For diverging beams, this warning shall state that viewing the laser output with certain optical instruments (for example: eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard. For collimated beams, this warning shall state that viewing the laser output with certain instruments designed for use at a distance (for example: telescopes and binoculars) may pose an eye hazard. Wavelength = 1.3/1.5 μm. Maximum power = 30 mW. *Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. *IEC is a registered trademark of the International Electrotechnical Commision. © 2012 EMCORE Corporation | REV 2012.12 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.