RoHS MLPCH12 High Current Multilayer Inductor Dimensions: .079±.008 (2.0±0.2) Inches (mm) 0.039 MAX (1.0) .020±.012 (0.5±0.3) .063±.008 (1.6±0.2) Allied Part Number .095±.012 (2.4±0.3) 0.039±.008 (1.0±0.2) Inductance Tolerance (µH) (%) MLPCH12-R24M-RC MLPCH12-R47M-RC MLPCH12-R68M-RC MLPCH12-1R0M-RC MLPCH12-1R5M-RC MLPCH12-2R2M-RC .071±.008 (1.8±0.2) Recommended PCB Layout 0.24 0.47 0.68 1.0 1.5 2.2 Test Freq. (MHz) DCR (Ω ±25%) Isat (mA) Typ. (Max) Irms (mA) Typ. (Max) 3 3 3 3 3 3 .023 .037 .065 .068 .10 .21 3600(4000) 2500(2900) 2500(2800) 1500(1900) 1500(1800) 1000(1300) 3500(4200) 2600(3100) 2400(2800) 2200(2600) 1600(1900) 1500(1800) 20 20 20 20 20 20 All specifications subject to change without notice. Features • • • • • High Saturation current up to 4.0A Expanded operating temp range Low DC Resistance Multilayer Ferrite Construction Suitable for pick and place Inductance vs. Frequency Chaaracteristics 4 3.5 3 Electrical Inductance Range: .24µH to 2.2µH Tolerance: 20% Test Frequency: (L) 3MHz, 200mV Operating Temp: -55ºC to +125ºC (Including self-temperature rise) Isat: Based on Inductance drop 30% from initial value without current Irms: Based on 40°C temp rise above ambient 25°C. Under no condition should the temperature of part exceed 125°C. 2R2 L(µH) 2.5 2 1R5 1.5 1R0 1 R68 0 Resistance to Soldering Heat R24 1 2.5 (L): HP4287A RF Impedance Analyzer DCR: HP4338B 1R5 1.5 1R0 1 0 Packaging: 3000 pieces per 7 inch reel Marking: None 1000 2R2 R68 R47 R24 0.5 Physical 100 2 L(µH) Test Equipment 10 Frequency(MHz) Inductance vs. DC Current 3 Pre-heat: 150ºC, 1min Solder Composition: Sn/Ag3.0/Cu5.0 Solder Temperature: 260°C ± 5°C Immersion Time: 10Sec ± 1Sec 949-356-1780 R47 0.5 1 10 ALLIED COMPONENTS INTERNATIONAL 2/27/2017 100 DC Current(m A) 1000 10000 www.alliedcomponents.com