LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 REVISION HISTORY Revision Rev. 1.0 Rev. 1.1 Rev. 1.2 Rev. 1.3 Rev. 1.4 Description Initial Issue Deleted SL grade Revised FEATURES & ORDERING INFORMATION Lead free and green package available to Green package available Added packing type in ORDERING INFORMATION Deleted TSOLDER in ABSOLUTE MAXIMUN RATINGS Revised PACKAGE OUTLINE DIMENSION in page 11 Revised VIH to 0.7*Vcc Revised VDR to 1.5V Revised ORDERING INFORMATION in page 12 Revised typo in PRODUCT FAMILY page 1 Added SL Grade Deleted E Grade Revised ISB1/IDR Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 0 Issue Date Nov.19.2008 May.6.2010 Aug.30.2010 Oct.4.2010 Aug.9.2011 LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 FEATURES GENERAL DESCRIPTION Fast access time : 55/70ns Low power consumption: Operating current : 20/18mA (TYP.) Standby current : 1A (TYP.) Single 2.7V ~ 5.5V power supply All outputs TTL compatible Fully static operation Tri-state output Data byte control : LB# (DQ0 ~ DQ7) UB# (DQ8 ~ DQ15) Data retention voltage : 1.5V (MIN.) Green package available Package : 44-pin 400 mil TSOP-II 48-ball 6mm x 8mm TFBGA The LY62W6416 is a 1,048,576-bit low power CMOS static random access memory organized as 65,536 words by 16 bits. It is fabricated using very high performance, high reliability CMOS technology. Its standby current is stable within the range of operating temperature. The LY62W6416 is well designed for low power application, and particularly well suited for battery back-up nonvolatile memory application. The LY62W6416 operates from a single power supply of 2.7V ~ 5.5V and all inputs and outputs are fully TTL compatible PRODUCT FAMILY Product Family LY62W6416 LY62W6416(I) Operating Temperature 0 ~ 70℃ -40 ~ 85℃ Vcc Range Speed 2.7 ~ 5.5V 2.7 ~ 5.5V 55/70ns 55/70ns FUNCTIONAL BLOCK DIAGRAM PIN DESCRIPTION Vcc Vss A0-A15 DQ0-DQ7 Lower Byte DQ8-DQ15 Upper Byte CE# WE# OE# LB# UB# Power Dissipation Standby(ISB1,TYP.) Operating(Icc,TYP.) 1µA 20/18mA 1µA 20/18mA SYMBOL DESCRIPTION A0 - A15 Address Inputs DQ0 – DQ15 Data Inputs/Outputs DECODER I/O DATA CIRCUIT 64Kx16 MEMORY ARRAY CE# Chip Enable Input WE# Write Enable Input OE# Output Enable Input LB# Lower Byte Control UB# Upper Byte Control VCC Power Supply VSS Ground COLUMN I/O CONTROL CIRCUIT Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 1 LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 PIN CONFIGURATION A4 1 44 A5 A3 2 43 A6 A2 3 42 A7 A1 4 41 OE# 5 40 UB# 6 39 LB# DQ0 7 38 DQ15 DQ1 8 37 DQ14 DQ2 9 36 DQ13 DQ3 10 35 DQ12 Vcc 11 34 Vss Vss 12 33 Vcc DQ4 13 32 DQ11 DQ5 14 31 DQ10 DQ6 15 30 LY62W6416 A0 CE# A LB# OE# A0 A1 B DQ8 UB# A3 A4 CE# DQ0 DQ9 C DQ9 DQ10 A5 A6 DQ1 DQ2 D Vss DQ11 NC A7 DQ3 Vcc E Vcc DQ12 NC NC DQ4 Vss F DQ14 DQ13 A14 A15 DQ5 DQ6 DQ15 NC A12 A13 WE# DQ7 A10 DQ7 16 29 DQ8 WE# 17 28 NC A15 18 27 A8 A14 19 26 A9 A13 20 25 A10 G A12 21 24 A11 H NC 22 23 NC A2 NC A8 A9 1 2 3 4 5 TFBGA TSOP II A11 NC NC 6 ABSOLUTE MAXIMUN RATINGS* PARAMETER Voltage on VCC relative to VSS Voltage on any other pin relative to VSS Operating Temperature Storage Temperature Power Dissipation DC Output Current SYMBOL VT1 VT2 TA TSTG PD IOUT RATING -0.5 to 6.5 -0.5 to VCC+0.5 0 to 70(C grade) -40 to 85(I grade) -65 to 150 1 50 UNIT V V ℃ ℃ W mA *Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to the absolute maximum rating conditions for extended period may affect device reliability. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 2 LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 TRUTH TABLE MODE Standby Output Disable Read Write Note: CE# OE# H X L L L L L L L L X X H H L L L X X X WE# LB# X X H H H H H L L L X H L X L H L L H L UB# X H X L H L L H L L I/O OPERATION DQ0-DQ7 DQ8-DQ15 High – Z High – Z High – Z High – Z High – Z High – Z High – Z High – Z DOUT High – Z High – Z DOUT DOUT DOUT DIN High – Z High – Z DIN DIN DIN SUPPLY CURRENT ISB1 ICC,ICC1 ICC,ICC1 ICC,ICC1 H = VIH, L = VIL, X = Don't care. DC ELECTRICAL CHARACTERISTICS SYMBOL TEST CONDITION MIN. PARAMETER Supply Voltage VCC 2.7 *1 Input High Voltage VIH 0.7*VCC *2 Input Low Voltage VIL - 0.2 Input Leakage Current ILI VCC ≧ VIN ≧ VSS -1 Output Leakage VCC ≧ VOUT ≧ VSS, ILO -1 Current Output Disabled Output High Voltage VOH IOH = -1mA 2.4 Output Low Voltage VOL IOL = 2mA Cycle time = Min. - 55 ICC CE# = VIL , II/O = 0mA - 70 Other pins at VIL or VIH Average Operating Power supply Current Cycle time = 1µ s ICC1 CE# = 0.2V , II/O = 0mA Other pins at 0.2V or VCC - 0.2V LL/LLI *5 25℃ SL CE# ≧VCC - 0.2V Standby Power *5 SLI ISB1 Others at 0.2V or 40℃ Supply Current VCC - 0.2V SL SLI Notes: 1. VIH(max) = VCC + 3.0V for pulse width less than 10ns. 2. VIL(min) = VSS - 3.0V for pulse width less than 10ns. 3. Over/Undershoot specifications are characterized, not 100% tested. 4. Typical values are included for reference only and are not guaranteed or tested. Typical values are measured at VCC = VCC(TYP.) and TA = 25℃ 5. This parameter is measured at VCC = 3.0V Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 3 TYP. 3.0 - *4 MAX. 5.5 VCC+0.3 0.6 1 UNIT V V V µA - 1 µA 2.7 - 0.4 V V 20 60 mA 18 50 mA 4 10 mA 1 1 1 1 1 50 5 5 20 25 µA µA µA µA µA LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 CAPACITANCE (TA = 25℃, f = 1.0MHz) PARAMETER Input Capacitance Input/Output Capacitance SYMBOL CIN CI/O MIN. MAX 6 8 - UNIT pF pF Note : These parameters are guaranteed by device characterization, but not production tested. AC TEST CONDITIONS Input Pulse Levels Input Rise and Fall Times Input and Output Timing Reference Levels Output Load 0.2V to VCC - 0.2V 3ns 1.5V CL = 30pF + 1TTL, IOH/IOL = -2mA/4mA AC ELECTRICAL CHARACTERISTICS (1) READ CYCLE PARAMETER Read Cycle Time Address Access Time Chip Enable Access Time Output Enable Access Time Chip Enable to Output in Low-Z Output Enable to Output in Low-Z Chip Disable to Output in High-Z Output Disable to Output in High-Z Output Hold from Address Change LB#, UB# Access Time LB#, UB# to High-Z Output LB#, UB# to Low-Z Output (2) WRITE CYCLE PARAMETER Write Cycle Time Address Valid to End of Write Chip Enable to End of Write Address Set-up Time Write Pulse Width Write Recovery Time Data to Write Time Overlap Data Hold from End of Write Time Output Active from End of Write Write to Output in High-Z LB#, UB# Valid to End of Write SYM. tRC tAA tACE tOE tCLZ* tOLZ* tCHZ* tOHZ* tOH tBA tBHZ* tBLZ* SYM. tWC tAW tCW tAS tWP tWR tDW tDH tOW * tWHZ* tBW LY62W6416-55 MIN. MAX. 55 55 55 30 10 5 20 20 10 55 25 10 - LY62W6416-70 MIN. MAX. 70 70 70 35 10 5 25 25 10 70 30 10 - UNIT LY62W6416-55 MIN. MAX. 55 50 50 0 45 0 25 0 5 20 50 - LY62W6416-70 MIN. MAX. 70 60 60 0 55 0 30 0 5 25 60 - UNIT *These parameters are guaranteed by device characterization, but not production tested. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 4 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 TIMING WAVEFORMS READ CYCLE 1 (Address Controlled) (1,2) tRC Address tAA Dout tOH Previous Data Valid Data Valid READ CYCLE 2 (CE# and OE# Controlled) (1,3,4,5) tRC Address tAA CE# tACE LB#,UB# tBA OE# tOE tOH tOHZ tBHZ tCHZ tOLZ tBLZ tCLZ Dout High-Z Data Valid High-Z Notes : 1.WE#is high for read cycle. 2.Device is continuously selected OE# = low, CE# = low, LB# or UB# = low. 3.Address must be valid prior to or coincident with CE# = low, LB# or UB# = low transition; otherwise tAA is the limiting parameter. 4.tCLZ, tBLZ, tOLZ, tCHZ, tBHZ and tOHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state. 5.At any given temperature and voltage condition, tCHZ is less than tCLZ , tBHZ is less than tBLZ, tOHZ is less than tOLZ. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 5 LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 WRITE CYCLE 1 (WE# Controlled) (1,2,3,5,6) tWC Address tAW CE# tCW tBW LB#,UB# tAS tWP tWR WE# tWHZ Dout TOW High-Z (4) tDW Din (4) tDH Data Valid WRITE CYCLE 2 (CE# Controlled) (1,2,5,6) tWC Address tAW CE# tAS tWR tCW tBW LB#,UB# tWP WE# tWHZ Dout High-Z (4) tDW Din tDH Data Valid Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 6 LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 WRITE CYCLE 3 (LB#,UB# Controlled) (1,2,5,6) tWC Address tAW tWR CE# tAS tCW tBW LB#,UB# tWP WE# tWHZ Dout High-Z (4) tDW Din tDH Data Valid Notes : 1.WE#,CE#, LB#, UB# must be high during all address transitions. 2.A write occurs during the overlap of a low CE#, low WE#, LB# or UB# = low. 3.During a WE# controlled write cycle with OE# low, tWP must be greater than tWHZ + tDW to allow the drivers to turn off and data to be placed on the bus. 4.During this period, I/O pins are in the output state, and input signals must not be applied. 5.If the CE#, LB#, UB# low transition occurs simultaneously with or after WE# low transition, the outputs remain in a high impedance state. 6.tOW and tWHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 7 LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 DATA RETENTION CHARACTERISTICS PARAMETER VCC for Data Retention Data Retention Current Chip Disable to Data Retention Time Recovery Time tRC* = Read Cycle Time SYMBOL TEST CONDITION VDR CE# ≧ VCC - 0.2V LL/LLI VCC = 1.5V SL 25℃ IDR CE# ≧ VCC - 0.2V SLI 40℃ Others at 0.2V or VCC-0.2V SL/SLI See Data Retention tCDR Waveforms (below) tR MIN. 1.5 - TYP. 0.5 0.5 0.5 0.5 MAX. 5.5 20 4 4 15 UNIT V µA µA µA µA 0 - - ns tRC* - - ns DATA RETENTION WAVEFORM Low Vcc Data Retention Waveform (1) (CE# controlled) VDR ≧ 1.5V Vcc Vcc(min.) Vcc(min.) tCDR CE# VIH tR CE# ≧ Vcc-0.2V VIH Low Vcc Data Retention Waveform (2) (LB#, UB# controlled) VDR ≧ 1.5V Vcc Vcc(min.) Vcc(min.) tCDR LB#,UB# VIH tR LB#,UB# ≧ Vcc-0.2V VIH Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 8 LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 PACKAGE OUTLINE DIMENSION θ 44-pin 400mil TSOP-Ⅱ Package Outline Dimension SYMBOLS A A1 A2 b c D E E1 e L ZD y Θ DIMENSIONS IN MILLMETERS MIN. NOM. MAX. 1.20 0.05 0.10 0.15 0.95 1.00 1.05 0.30 0.45 0.12 0.21 18.212 18.415 18.618 11.506 11.760 12.014 9.957 10.160 10.363 0.800 0.40 0.50 0.60 0.805 0.076 o o o 0 3 6 DIMENSIONS IN MILS MIN. NOM. MAX. 47.2 2.0 3.9 5.9 37.4 39.4 41.3 11.8 17.7 4.7 8.3 717 725 733 453 463 473 392 400 408 31.5 15.7 19.7 23.6 31.7 3 o o o 0 3 6 Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 9 LY62W6416 Rev. 1.4 64K X 16 BIT LOW POWER CMOS SRAM 48-ball 6mm × 8mm TFBGA Package Outline Dimension Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 10 LY62W6416 64K X 16 BIT LOW POWER CMOS SRAM Rev. 1.4 ORDERING INFORMATION LY62W6416 U V - WW XX Y Z Z : Packing Type Blank : Tube or Tray Tray : 44-pin 400 mil TSOP-II 48-ball 6 mm x 8 mm TFBGA T : Tape Reel Y : Temperature Range Blank : (Commercial) 0°C ~ 70°C I : (Industrial) -40°C ~ +85°C XX : Power Type LL : Ultra Low Power SL : Special Ultra Low Power WW : Access Time(Speed) V : Lead Information L : Green Package U : Package Type M : 44-pin 400 mil TSOP-II G : 48-ball 6 mm x 8 mm TFBGA Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 11 LY62W6416 Rev. 1.4 64K X 16 BIT LOW POWER CMOS SRAM THIS PAGE IS LEFT BLANK INTENTIONALLY. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 12