Hirose DF4-30DP-2C 2mm pitch connector directly mounted on board Datasheet

2mm Pitch Connector Directly Mounted on Board
DF4 Series
■Features
1. Cost Saving for Header
Thanks to the insertion/extraction socket and the harness product at
the both connector edges, one of two headers necessary at both edge
sockets can be saved without losing the function to separate
individual boards.
2. Miniature and Multiple Contacts
The miniature connector has broad variations in contact number.
Board mounting height :
Maximum contact number :
4mm (Crimping )
32 contacts (Crimping )
3. Board Pre-fixed Mechanism
The insertion state to the board is a light crimping, which enables the
pre-fixed process to the board.
Height 4mm
■Applications
Note PC, Small business equipment
Board pre-fixed mechanism
B170
■Product Specifications
Current rating
Crimping
(Note 1)
Cable Size
Rating
Crimping
Item
: 3A
Operating Temperature Range
-30 to +85ç(Note 2)
AWG 26
: 2A
Operating Moisture Range
-40 to 80%
AWG 28
: 1A
Storage Temperature Range -10 to +60ç
AWG 26, 28 : 1A
Insulation Displacement Cable Size
Voltage rating
AWG 24
250V AC Insulation Displacement
100V AC
Storage Moisture Range
Specification
-40 to 70%
Condition
1. Insulation Resistance
1000M ohms Min
500V DC
2. Withstanding voltage
No flashover or insulation breakdown.
650V AC/1 minute
3. Crimping Area Resistance 30m ohms Max.
100mA
4. Vibration
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
No damage, cracks, or parts looseness.
5. Humidity (Steady state) Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min
6. Temperature Cycle
96 hours at temperature of 40ç and humidity of 90% to 95%
Contact resistance: 30m ohms Max Insulation resistance: 1000M ohms Min Flow: 250ç for 10 seconds
7. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Product
Part
Material
Crimping Plug
Insulator
Crimping Contact for Plug
Contact
Insulator Displacement Plug
Finish
Remarks
Polyamide
Black
UL94V-0
Brass
Tin plating
–––––––
Insulator
Polyamide
Black
UL94V-0
Contact
Phosphor copper
Tin plating
–––––––
■Ordering Information
●Connector
DF4
q
- * P - 2 C
w
e
r
t
q Series Name: DF4
r Contact Pitch: 2mm
w Number of Contact: 2 to 15, 4 to 32
t Connection Type
e Connector Type
C: Crimping socket
P: Single row plug
R26: Insulator displacement plug for AWG26
DP: Double row plug
R28: Insulator displacement plug for AWG28
●Contact
DF4
- 2428- PCE
q
q Applicable cable size
2428 : AWG24 to 28
w
w Packaging Type
PCF: Plug contact/Reel
PC: Plug contact/Bag
B171
■Single Row Crimping Plug
[Specific No.] – **, (**)
Blank: 1 bag: 100pcs.
(40): 500pcs. packaging
(41): 1000pcs. packaging
Photo: Contact insertion state.
●Applicable Through-hole Diameter : Ø0.8+0.1
+0
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
Part Number
CL No.
Number of Contacts
A
B
DF4- 2P-2C (**)
544-0003-4-**
2
04.5
DF4- 3P-2C (**)
544-0004-7-**
3
06.5
02.0
DF4- 9P-2C (**)
544-0010-0- **
09
18.5
16.0
04.0
DF4-10P-2C (**)
544-0011-2- **
10
20.5
18.0
DF4- 4P-2C (**)
544-0005-0-**
4
DF4- 5P-2C (**)
544-0006-2-**
5
08.5
06.0
DF4-11P-2C (**)
544-0012-5- **
11
22.5
20.0
10.5
08.0
DF4-12P-2C (**)
544-0013-8- **
12
24.5
22.0
DF4- 6P-2C (**)
544-0007-5-**
DF4- 7P-2C (**)
544-0008-8-**
6
12.5
10.0
DF4-13P-2C (**)
544-0014-0- **
13
26.5
24.0
7
14.5
12.0
DF4-14P-2C (**)
544-0015-3- **
14
28.5
26.0
DF4- 8P-2C (**)
544-0009-0-**
8
16.5
14.0
DF4-15P-2C (**)
544-0016-6- **
15
30.5
28.0
Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag.
■Crimping Contact
Part Number
CL No.
Packaging Type
Quantity
DF4-2428PCF
544-0020-3
Reel
10,000
Tin plating
DF4-2428PC
544-0021-6
Bag
100
Tin plating
Finish
●Applicable Cable (Tin plating Annealed copper wire)
Conductor Size
Recommended Cable
AWG24 (11 cores./0.16mm)
AWG 26 (7cores./0.16mm)
AWG 28 (7cores./0.127mm)
UL1061
Jacket Diameter
Ø0.75 to Ø1.2mm
UL1061/1007
Note:If other cables are used instead of the applicable cable, contact Hirose sales
department.
● Strip Length: 1.3 to 1.9mm
BApplicable Crimping Tool
Type
Applicator
Press Main Unit
Part Number
Applicable Contact
AP105-DF4-2428P
901-4539-0
DF4-2428PCF
CM-105
901-0005-4
–––––––
550-0173-6
DF4-2428PC
550-0179-2
DF4-2428PCF
Manual Crimping Tool DF4-TA2428HC
Extraction Tool
CL No.
DF-C-PO (B)
Note: If any trouble has occurred due to other tools, which are not designated by Hirose,
Hirose won't guarantee any products.
B172
■Double Row Crimping Plug
Photo: Contact insertion state
● Applicable Through-hole Diameter Ø0.9±0.05
Note:The dip side may be deviated according to the cable thickness and the crimping contact bent up/down.
Unit:mm
Part Number
CL No.
Number of Contacts
A
B
DF4-04DP-2C (**)
544-0078-3-**
04
04.8
02.0
DF4-06DP-2C (**)
544-0079-6-**
06
06.8
04.0
DF4-08DP-2C (**)
544-0080-5-**
08
08.8
06.0
DF4-10DP-2C (**)
544-0081-8-**
10
10.8
08.0
DF4-12DP-2C (**)
544-0082-0-**
12
12.8
10.0
DF4-14DP-2C (**)
544-0083-3-**
14
14.8
12.0
DF4-16DP-2C (**)
544-0084-6-**
16
16.8
14.0
DF4-18DP-2C (**)
544-0085-9-**
18
18.8
16.0
DF4-20DP-2C (**)
544-0086-1-**
20
20.8
18.0
20.0
DF4-22DP-2C (**)
544-0087-4-**
22
22.8
DF4-24DP-2C (**)
544-0088-7-**
24
24.8
22.0
DF4-26DP-2C (**)
544-0089-0-**
26
26.8
24.0
DF4-28DP-2C (**)
544-0090-9-**
28
28.8
26.0
DF4-30DP-2C (**)
544-0091-1-**
30
30.8
28.0
DF4-32DP-2C (**)
544-0092-4-**
32
32.8
30.0
[Specific No.] – **, (**)
Blank: 1 bag: 100pcs.
Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag.
B173
■Right Angle Type ID Plug
Photo: Contact insertion state.
●Applicable Through-hole Diameter : Ø0.8+0.1
+0
Note 1. The plug, which has the mark at the designated position, is for AWG26.
Note 2. The cleaning by heat and trichloroethylene an't be implemented.
●Applicable Cable (Tin plating Annealed copper wire)
Part Number
Applicable Cable
Jacket Diameter
DF4-*PA-2R26
UL1061 AWG26 (7/0.16)
Ø0.9 to 1mm
DF4-*PA-2R28
UL1061 AWG28 (7/0.127)
Ø0.9 to 1mm
●AWG26
Part Number
Unit:mm
CL No.
[Specific No.] – **, (**)
Blank: Tin plating, 1 pack: 100pcs.
●AWG28
Part Number
Unit:mm
Number of Contacts
A
B
Number of Contacts
A
B
DF4-02PA-2R26 (**) 544-0022-9-**
02
06.0
02.0
DF4- 2PA-2R28 (**) 544-0036-3-**
CL No.
02
06.0
02.0
DF4-03PA-2R26 (**) 544-0023-1-**
03
08.0
04.0
DF4- 3PA-2R28 (**) 544-0037-6-**
03
08.0
04.0
DF4-04PA-2R26 (**) 544-0024-4-**
04
10.0
06.0
DF4- 4PA-2R28 (**) 544-0038-9-**
04
10.0
06.0
DF4-05PA-2R26 (**) 544-0025-7-**
05
12.0
08.0
DF4- 5PA-2R28 (**) 544-0039-1-**
05
12.0
08.0
DF4-06PA-2R26 (**) 544-0026-0-**
06
14.0
10.0
DF4- 6PA-2R28 (**) 544-0040-0-**
06
14.0
10.0
DF4-07PA-2R26 (**) 544-0027-2-**
07
16.0
12.0
DF4- 7PA-2R28 (**) 544-0041-3-**
07
16.0
12.0
DF4-08PA-2R26 (**) 544-0028-5-**
08
18.0
14.0
DF4- 8PA-2R28 (**) 544-0042-6-**
08
18.0
14.0
DF4-09PA-2R26 (**) 544-0029-8-**
09
20.0
16.0
DF4- 9PA-2R28 (**) 544-0043-9-**
09
20.0
16.0
DF4-10PA-2R26 (**) 544-0030-7-**
10
22.0
18.0
DF4-10PA-2R28 (**) 544-0044-1-**
10
22.0
18.0
DF4-11PA-2R26 (**) 544-0031-0-**
11
24.0
20.0
DF4-11PA-2R28 (**) 544-0045-4-**
11
24.0
20.0
DF4-12PA-2R26 (**) 544-0032-2-**
12
26.0
22.0
DF4-12PA-2R28 (**) 544-0046-7-**
12
26.0
22.0
DF4-13PA-2R26 (**) 544-0033-5-**
13
28.0
24.0
DF4-13PA-2R28 (**) 544-0047-0-**
13
28.0
24.0
DF4-14PA-2R26 (**) 544-0034-8-**
14
30.0
26.0
DF4-14PA-2R28 (**) 544-0048-2-**
14
30.0
26.0
DF4-15PA-2R26 (**) 544-0035-0-**
15
32.0
28.0
DF4-15PA-2R28 (**) 544-0049-5-**
15
32.0
28.0
Note : A packaging quantity is delivered in the bag unit (100 pcs.). If needed, please order the product per bag.
B174
■Straight Type ID Plug
Photo: Contact insertion state.
●Applicable Through-hole Diameter : Ø0.8+0.1
+0
Note 1. The plug, which has the mark at the designated position, is for AWG26.
Note 2. The cleaning by heat and trichloroethylene can't be implemented.
●Applicable Cable (Tin plating Annealed copper wire)
Part Number
Applicable Cable
Jacket Diameter
DF4-*P-2R26
UL1061 AWG26 (7/0.16)
Ø0.9 to 1mm
DF4-*P-2R28
UL1061 AWG28 (7/0.127)
Ø0.9 to 1mm
●AWG26
Part Number
Unit:mm
CL No.
[Specific No.] – **, (**)
Blank: Tin plating, 1 pack: 100pcs.
●AWG28
Part Number
Unit:mm
Number of Contacts
A
B
Number of Contacts
A
B
DF4-02P-2R26 (**) 544-0050-4-**
02
06.0
02.0
DF4- 2P-2R28 (**) 544-0064-9-**
CL No.
02
06.0
02.0
DF4-03P-2R26 (**) 544-0051-7-**
03
08.0
04.0
DF4- 3P-2R28 (**) 544-0065-1-**
03
08.0
04.0
DF4-04P-2R26 (**) 544-0052-0-**
04
10.0
06.0
DF4- 4P-2R28 (**) 544-0066-4-**
04
10.0
06.0
DF4-05P-2R26 (**) 544-0053-2-**
05
12.0
08.0
DF4- 5P-2R28 (**) 544-0067-7-**
05
12.0
08.0
DF4-06P-2R26 (**) 544-0054-5-**
06
14.0
10.0
DF4- 6P-2R28 (**) 544-0068-0-**
06
14.0
10.0
DF4-07P-2R26 (**) 544-0055-8-**
07
16.0
12.0
DF4- 7P-2R28 (**) 544-0069-2-**
07
16.0
12.0
DF4-08P-2R26 (**) 544-0056-0-**
08
18.0
14.0
DF4- 8P-2R28 (**) 544-0070-1-**
08
18.0
14.0
DF4-09P-2R26 (**) 544-0057-3-**
09
20.0
16.0
DF4- 9P-2R28 (**) 544-0071-4-**
09
20.0
16.0
DF4-10P-2R26 (**) 544-0058-6-**
10
22.0
18.0
DF4-10P-2R28 (**) 544-0072-7-**
10
22.0
18.0
DF4-11P-2R26 (**) 544-0059-9-**
11
24.0
20.0
DF4-11P-2R28 (**) 544-0073-0-**
11
24.0
20.0
DF4-12P-2R26 (**) 544-0060-8-**
12
26.0
22.0
DF4-12P-2R28 (**) 544-0074-2-**
12
26.0
22.0
DF4-13P-2R26 (**) 544-0061-0-**
13
28.0
24.0
DF4-13P-2R28 (**) 544-0075-5-**
13
28.0
24.0
DF4-14P-2R26 (**) 544-0062-3-**
14
30.0
26.0
DF4-14P-2R28 (**) 544-0076-8-**
14
30.0
26.0
DF4-15P-2R26 (**) 544-0063-6-**
15
32.0
28.0
DF4-15P-2R28 (**) 544-0077-0-**
15
32.0
28.0
Note : A packaging quantity is delivered in the bag unit (100 pcs.). If needed, please order the product per bag.
B175
BID Tool
Type
Part Number
Objective Connector
DF3-DF4 Table Insulation
SA701/DF3
DF3-*S-2R**
Displacement Machine
903-4507-7
DF4-*P/PA-2R**
Remarks
Desk top machine
BPrecautions
1. Recommended
Flow: 250ç for 3 seconds
1. Soldering Condition
Manual soldering: 290ç for 2 seconds
■ If the cable neighboring the connector is bent and unstraightened, secure a large bending radius because the
Jacket will be broken by the solder heat and the contact wire will be exposed.The Jacket in this part will be tore.
■ After the soldering process. If a stress is applied to the cable in the state where the connector and the
cable has heat inside, the Jacket hold area will be loosen. Therefore, carry out the post-soldering
operation after the connector has returned to the room temperature..
2. Cleaning Condition
Refer to Nylon Connector Use Hand book.
Don't use a solvent such ass trichloroethylene which invades the cable Jacket. In addition, avoid heat
cleaning by a solvent.
3. Connection Condition
B176
Refer to the Nylon Connector Use Hand book.
Similar pages