MACOM MAAPGM0030 Amplifier, power, 1w 5.0-9.0 ghz Datasheet

Amplifier, Power, 1W
5.0-9.0 GHz
MAAPGM0030
903239 —
Preliminary Information
Features
♦ 1 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ MSAG™ Process
APGM0030
YWWLLLL
Primary Applications
♦ Multiple Band Point-to-Point Radio
♦ SatCom
♦ ISM Band
Description
The MAAPGM0030 is a packaged, single stage, 1W power
amplifier with on-chip bias networks in a bolt down ceramic
package, allowing easy assembly. This product is fully matched
to 50 ohms on both the input and output. It can be used as a
power amplifier stage or as a driver stage in high power
applications.
Pin Number
RF Designator
1
No Connection
2
No Connection
3
RF IN
4
No Connection
5
VGG
6
No Connection
7
No Connection
Each device is 100% RF tested to ensure performance
compliance. The part is fabricated using M/A-COM’s GaAs
Multifunction Self-Aligned Gate (MSAG™) Process.
M/A-COM’s MSAG™ process features robust silicon-like
manufacturing processes, planar processing of ion implanted
transistors and multiple implant capability enabling power, lownoise, switch and digital FETs on a single chip. The use of
refractory metals and the absence of platinum in the gate metal
formulation prevents hydrogen poisoning when employed in
hermetic packaging.
8
RF OUT
9
No Connection
10
VDD
Absolute Maximum Conditions 1
Parameter
Symbol
Absolute Maximum
Units
Input Power
PIN
23.0
dBm
Drain Supply Voltage
VDD
+12.0
V
Gate Supply Voltage
VGG
-3.0
V
Quiescent Drain Current (No RF, 40% Idss)
IDQ
470
mA
PDISS
3.2
W
Junction Temperature
TJ
180
°C
Storage Temperature
TSTG
-55 to +150
°C
230
°C
Quiescent DC Power Dissipated (No RF)
Processing Temperature
1. Operation outside of these ranges may reduce product reliability.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 1W
5.0-9.0 GHz
MAAPGM0030
903239 —
Preliminary Information
Recommended Operating Conditions
Min
Typ
Max
Unit
Drain Supply Voltage
Characteristic
Symbol
VDD
4.0
8.0
10.0
V
Gate Supply Voltage
VGG
-2.4
-2.0
-1.5
V
21
dBm
150
°C
Input Power
PIN
Junction Temperature
TJ
Thermal Resistance
ΘJC
Package Base Temperature
TB
18
28.4
°C/W
Note 2
°C
2. Maximum Package Base Temperature = 150°C — ΘJC* VDD * IDQ
Electrical Characteristics: TB = 40°C, Z0 = 50 Ω, VDD = 8V, IDQ ≈ 300 mA3, Pin = 18 dBm, RG ≈ 240 Ω
Parameter
Symbol
Typical
Units
Bandwidth
f
5.0-9.0
GHz
Output Power
POUT
30
dBm
Power Added Efficiency
PAE
35
%
1-dB Compression Point
P1dB
30
dBm
Small Signal Gain
G
14
dB
Input VSWR
VSWR
1.8:1
Output VSWR
VSWR
2.0:1
Gate Supply Current
IGG
<4
mA
Drain Supply Current
IDD
< 500
mA
Noise Figure
NF
9
dB
2nd Harmonic
2f
-20
dBc
3rd Harmonic
3f
-35
dBc
Output Third Order Intercept
OTOI
38
dBm
3 Order Intermodulation Distortion,
Single Carrier Level = 21 dBm
IM3
-15
dBm
5th Order Intermodulation Distortion,
Single Carrier Level = 21 dBm
IM5
-36
dBm
rd
3. Adjust VGG between –2.4 to –1.5V to achieve indicated IDQ.
Operating Instructions
This device is static sensitive. Please handle with care. To operate the device,
follow these steps.
1. Apply VGG ≈ -1.8V, VDD= 0 V.
2. Ramp VDD to desired voltage, typically 8 V.
3. Adjust VGG to set IDQ, (See Note 3 above).
4. Set RF input.
5. Power down sequence in reverse. Turn VGG off last.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 1W
5.0-9.0 GHz
MAAPGM0030
903239 —
Preliminary Information
50
50
50
50
POUT
POUT
PAE
40
40
40
30
30
30
30
20
20
20
20
10
10
10
10
0
PAE(%)
POUT (dBm)
PAE
40
0
4
5
6
7
8
9
10
0
0
4
Frequency (GHz)
5
6
7
8
9
10
Drain Voltage (V)
Figure 1. Output Power and Power Added Efficiency vs. Frequency at VDD = 8V
and Pin = 18 dBm.
Figure 2. Saturated Output Power and Power Added Efficiency vs. Drain Voltage at fo = 7 GHz.
30
50
VDD = 4
VDD = 6
VDD = 8
VDD = 10
6
Gain
Input VSWR
Output VSWR
40
25
30
20
4
20
15
3
10
10
2
0
5
5
4
5
6
7
8
9
Frequency (GHz)
Figure 3. 1dB Compression Point vs. Drain Voltage
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
10
1
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
Frequency (GHz)
Figure 4. Small Signal Gain and VSWR vs. Frequency at VDD = 8V.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 1W
5.0-9.0 GHz
MAAPGM0030
903239 —
Preliminary Information
APGM0030
Figure 5. CR-15 Package Dimensions
The CR-15 is a high frequency, low thermal resistance package. The package consists of a
cofired ceramic construction with a copper-tungsten base and iron-nickel-cobalt leads. The finish
consists of electrolytic gold over nickel plate.
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 1W
5.0-9.0 GHz
MAAPGM0030
903239 —
Preliminary Information
V DD
0.1 μ F
RG
See Electrical Characteristics- Page 2
APGM0030
YWWLLLL
RFIN
RFOUT
VGG
0.1 μF
Figure 6. Recommended Bias Configuration
Pin Number
RF Designator
1
No Connection
2
No Connection
3
RF IN
4
No Connection
5
VGG
6
No Connection
7
No Connection
8
RF OUT
9
No Connection
10
VDD
Assembly Instructions:
This flange mount style package provides a robust interface between a highly integrated GaAs MMIC device and a circuit board
which may be assembled using conventional surface mount techniques. A thin shim made of a thermally and electrically
conductive, ductile material should be used prior to installation of the CR-15 to improve the thermal and electrical performance of
the package to housing interface. Refer to M/A-COM Application Note #M567* for more information .
For applications where surface mount components are to be installed after the CR-15 installation, this package will not be
damaged when subjected to typical convection or IR oven reflow profiles. Refer to M/A-COM Application Note #M538* for
maximum allowable reflow time and temperature. Alternatively, the package leads may be individually soldered. Whether an iron
or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static
discharge (ESD) safe.
* Application Notes can be found by going to the Site Search Page on M/A-COM’s web page
(http://www.macom.com/search/search.jsp) and searching for the required Application Note.
Biasing Notes:
♦ A negative bias must be applied to VGG before applying a positive bias to VDD to prevent damage to the amplifier.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Similar pages