8 D 7 5 6 4 NOTES: 1. MOUNTING: Mounts in a .281 .002 [ 7.13mm .05] panel hole on .375 [9.5mm] centers. Panel thickness .031 [0.8mm] to .125 [3.18mm]. Panel hole should be deburred, but not chamfered. 2. ASSEMBLY: Insert lens through panel hole, slide RNG 268 retainer on back of lens. PCB mounted LEDs slide into lens when the panel cover is closed or the PCB card is inserted into the case. 3. MATERIAL: Polycarbonate, UL 94-V2 GLO Series- Polycarbonate & Acrylic blend Seal- TPE 4. Meets NEMA 4 standards 5. U.S. & Foreign Pat. Issued & Pend. 2 3 ECN# 1 1 REVISIONS DESCRIPTION ADD GLO SERIES. CHANGED ORDERING CODE FORMAT 4-21-09 AZ 001 REVISED PER ECR111009AZ01 6/14/10 KH REV. DATE INITIALS D RETAINER (ORDER SEPARATELY) C C RNG 268 .330 (8.38mm) .300 (7.62mm) .247 (6.27mm) .281 (7.14mm) B B .070 (1.78mm) ORDERING CODE : .260 (6.60mm) CMS 322 XXX MODEL LENS COLOR RTP RED TRANSPARENT ATP AMBER TRANSPARENT GTP GREEN TRANSPARENT BTP BLUE TRANSPARENT YTP YELLOW TRANSPARENT CTP CLEAR TRANSPARENT GLO WHITE TRANSLUCENT A 8 7 LENS WITH MOISTURE SEAL DISPAY PANEL UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: LED ANGLES 1' FINISH MATERIAL BREAK ALL CORNERS AND SHARP EDGES .030 MAX VISUAL COMMUNICATIONS COMPANY, INC. SEE NOTES DECIMALS .X .020 .010 .XX .XXX .005 190 Bosstick Boulevard, Suite101 San Marcos, CA 92069 USA Phone (760) 560-1300 Fax (760) 560-1301 email [email protected] FINISH TITLE: SEE NOTES RNG 268 RETAINER ASSEMBLY PCB THIRD ANGLE PROJECTION PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 6 5 4 3 DRAWN: CHECKED: 5MM ROUND LOW PROFILE FRESNEL LENS W/SEAL DATE APPROVAL K.Howard 6/14/10 DZ 6/14/10 SIZE SCALE: 6:1 DO NOT SCALE DRAWING 2 REV DWG. NO. B CMS 322 XXX 001 SHEET 1 OF 1 1 A