Designed for Rugged Excellence ISC-1310FR Industrial Serial Media Converter 1-port RS-232/422/485 to Fiber Features Auto or manual switching baud rate from 50 ~ 921.6 Kbps Support Ring mode * Power requirement from +12 ~ 48 VDC Dual power input Provided DIP-Switch to set Ring function IP-30 housing design DIN-Rail and wall mounting enabled *Max nodes in Ring mode: 32 nodes @ 115200 bps 24 nodes @ 230400 bps 11 nodes @ 460800 bps 6 nodes @ 921600 bps Introduction ISC-1310FR is a cost-effective solution for the conversion between RS-232/422/485 and fiber interface, it allows you to extend the serial communication distance by optical fiber. ISC-1310FR supports fiber ring mode. ISC-1310FR series with wide operating temperature range from -40 ~ 75℃ and accepts a wide voltage range from +12 ~ 48 VDC power inputs, so it is suitable for harsh operating environments * All specifications are subject to change without notice. Designed for Rugged Excellence Pin Definition Pin # RS-232 1 DB9 connector RS-422 RS-485 RS-485 ( 4 wire ) ( 2 wire ) TX- TX- 2 RXD TX+ TX+ 3 TXD RX+ RX+ DATA+ RX- RX- DATA- GND GND GND 4 5 GND 6 7 8 Dip Switch Definition Terminal Resistor Setting Mode Setting * All specifications are subject to change without notice. Designed for Rugged Excellence Dimension * All specifications are subject to change without notice. Designed for Rugged Excellence Specifications ORing Media Converter ISC-1310FR-MM Model ISC-1310FR-SS Fiber Port Fiber Port Number 1 Fiber Optical Connector SC or ST Fiber Mode Multi-mode Single-mode 5 Km 40 Km 850 nm 1310 nm 0 ~ -5 dBm 0 ~ -5 dBm -5 ~ -20 dBm -5 ~ -20 dBm Typical Distance (km) Wavelength (nm) TX Output RX sensitivity Serial Port Connector DB9(male) x 1 Operation Mode RS-232 / RS-422 / 4(2)-Wire RS-485 can be configured by DIP switch Serial Baud Rate 50 bps to 921.6 Kbps RS-232 TxD, RxD, GND RS-422 Tx+,Tx-, Rx+, Rx-,GND RS-485 (2-wire) D+, D-, GND RS-485 (4-wire) Tx+,Tx-, Rx+, Rx-,GND LED Indicator Power indicator 2 x LEDs, Green On : Power is on and functioning Normal Auto Baud Rate LED Green: Auto baud rate Orange: Serial port is receiving data (RX) Serial TX / RX LEDs Green: Serial port is transmitting data (TX) Ring indicator (RING) Green : Indicate system operated in Ring mode Power Input Power Dual DC inputs. +12 ~ 48 VDC on 4-pin terminal block Power Consumption (Typ.) 1.6 Watts Overload current protection 2A Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 26.1 (W) x 70 (D) x 95 (H)mm Weight (g) 205 g Environmental Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -40 to 75oC (-40 to 167oF) Regulatory approvals EMI FCC Part 15B, CISPR 32 ( EN55032 Class B) EN61000-4-2 (ESD) EN61000-4-3 (RS) EN61000-4-4 (EFT) EMS EN61000-4-5 (Surge) EN61000-4-6 (CS) EN61000-4-8 EN61000-4-11 * All specifications are subject to change without notice. Designed for Rugged Excellence Shock IEC60068-2-27 Free Fall IEC60068-2-31 Vibration IEC60068-2-6 Warranty 5 years Ordering Information ISC- A B C D E F Code Serial port Definition number - 1 : 1 port Option Converter port Serial Type number - 1 : RS-232 - 1 : 1 port Converter Type Other type Additional function - 0 : other type - F : Fiber - R : Ring mode - 2 : RS-422/485 - 1 : RS-232 - 3 : RS-232/422/485 - 2 : RS-422/485 - 3 : RS-232/422/485 Available Model Name Description ISC-1310FR-MM-SC Industrial Serial Media Converter ,1-port RS-232/422/485 to Fiber, SC, multi-mode, 5Km/850nm ISC-1310FR-SS-SC Industrial Serial Media Converter ,1-port RS-232/422/485 to Fiber, SC, single-mode, 40Km/1310nm ISC-1310FR-MM-ST Industrial Serial Media Converter ,1-port RS-232/422/485 to Fiber, ST, multi-mode, 5Km/850nm ISC-1310FR-SS-ST Industrial Serial Media Converter ,1-port RS-232/422/485 to Fiber, ST, single-mode, 40Km/1310nm Model Packing List O ISC-1310FR x 1 DIN-Rail Kit x 1 Quick Installation Guide x 1 Wall-mount Kit x 1 Accessories Fiber Patch Cord FPC-SCST-MM3M FPC-SCSC-MM3M FPC-SCST-SS3M FPC-SCSC-SS3M * All specifications are subject to change without notice.