Industrial Ethernet Switch Optical/PoE Network Accessories v1.1 / Dec, 2011 IBS-102FX Series IBS-102FX Series Industrial 2-port optical bypass switch for fiber optical network with 4xLC duplex Connector Industrial Ethernet Switch 1 Features ▪ Support 100M/1G/10G optical bypass function of 2 port duplex or 4 port simplex fiber connection ▪ Different models supported for multi-mode or single-mode optical fiber ▪ Low insertions loss ▪ Throughput not affected and no extra delay ▪ Bypass switching time < 10ms ▪ Dual wide-range power inputs: 12~48VDC ▪ Relay output for power failure warning ▪ Rigid IP-30 housing design ▪ DIN-Rail/Wall-mount installation Introduction IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device. Practical Operation Normal mode: The Bypass switch diverts the data from the Network ports data to the Monitor ports. 1-634 w w w.oring - net wo rk in g.co m Bypass mode: The Network data traffic routed directly to the other Network port. And the Monitor data traffic routed directly to the other Monitor port. v1.1 / Dec, 2011 Industrial Ethernet Switch Optical/PoE Network Accessories Industrial Ethernet Switch Industrial Media Converter Industrial Device Server Industrial Wireless Access Point Dimensions Industrial Cellular VPN Router Industrial M2M Gateway Accessories Network Management Software (Unit=mm) 1-635 D esign ed for R u gged E xcellence Industrial Ethernet Switch Optical/PoE Network Accessories v1.1 / Dec, 2011 Specifications ORing Bypass Switch Model IBS-102FX-SS-LC IBS-102FX-MM-LC 4 Duplex Single-mode LC connector 4 Duplex Multi-mode LC connector Physical Ports LC connector Fiber Ethernet Industrial Ethernet Switch 1 Optical Fiber Single-mode: 9/125μm Multi-mode: 50/125μm or 62.5/125μm Operating Wavelength 1260 ~ 1570 nm 780 ~ 1350 nm Insert loss 1.6 dB < 1.0 dB Switch time < 10ms DIP Switch Settings DIP Swicth No.1 Power-1 failed warning detection – (On) relay enable (Off) relay disable DIP Switch No.2 Power-2 failed warning detection – (On) relay enable (Off) relay disable LED Indicators Power indicator Normal indicator Fault indicator Green : power LED x 2. Green On : Operated in normal mode Amber : Indicates power failure occurred Fault contact Relay Relay output for power failure warning Power Input power Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block Power consumption (Typ.) 2.7 Watts Overload current protection Present Reverse Polarity Present on terminal block Physical Characteristics Enclosure IP-30 Dimensions (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.) Weight (g) 405g Environmental Storage Temperature -40 to 85°C (-40 to 185°F) Operating Temperature -20 to 70°C (-4 to 158°F) Operating Humidity 10% to 90% Non-condensing Regulatory Approvals EMI Shock FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 1,246,758 Warranty 1 year EMS 1-636 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch Optical/PoE Network Accessories v1.1 / Dec, 2011 Industrial Ethernet Switch Ordering Information I BS -1 0 A FX- B B -LC Code Definition - 2: 2 ports Model Name Available Model Single mode or Multi mode - MM: Multi-mode - SS: Single-mode Industrial Media Converter Option Networking Port Number Description Industrial 2-port bypass switch for fiber optical network with 4xLC duplex, multi-mode, LC connector IBS-102FX-SS-LC Industrial 2-port bypass switch for fiber optical network with 4xLC duplex, single-mode, LC connector Packing List ‧IBS-102FX ‧Wall-mount Kit ‧DIN-Rail Kit ‧Quick Installation Guide Industrial Wireless Access Point Optional Accessories (Can be purchased separately) ‧DR-45 series : 45 Watts DIN-Rail power supply ‧DR-75 series : 75 Watts DIN-Rail power supply ‧DR-120 series : 120 Watts DIN-Rail power supply ‧SDR-240-48, 240W DIN-Rail power supply ‧SDR-480-48, 480W DIN-Rail power supply ‧PAA-121000, 12VDC/1000mA 12W Power Adapter with universal 100 to 240VAC input, US plug ‧PAE-121000, 12VDC/1000mA 12W Power Adapter with universal 100 to 240VAC input, EU plug ‧FPC series : Fiber Patch cord Industrial Device Server IBS-102FX-MM-LC Industrial Cellular VPN Router Industrial M2M Gateway Accessories Network Management Software D esign ed for R u gged E xcellence 1-637