Technical Data 1157 Effective March 2016 Supersedes December 2015 BUSSMANN SERIES Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse™), midget and IEC 10x38mm DIN-Rail fused disconnect switches Contents Description Page Description Page 1-, 2- and 3-pole — Class CC, Midget, 10x38mm Auxiliary contacts Description and specifications. . . . . . . . . . . . . . . 2-3 Description and specifications. . . . . . . . . . . . . . . . . 8 Available fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Recommended lockout devices. . . . . . . . . . . . . . . . 3 PLC fuse monitor Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description and specifications. . . . . . . . . . . . . . . . . 9 Motor sizing table. . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Wiring schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1-, 2- and 3-pole — Class CF Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Description and specifications. . . . . . . . . . . . . . . 5-6 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Available fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Recommended lockout devices. . . . . . . . . . . . . . . . 6 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Motor sizing tables . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2016 1-, 2- and 3-pole — Class CC, midget, 10x38mm • Description: Flammability rating • • • Volts 35mm DIN-Rail Local open fuse indication minimum voltage** • 600Vac (Class CC) • 240Vac (midget UL ) • 90Vac for AC versions • 400Vac (midget International Electrotechnical Commission (IEC) • 12Vdc for DC versions • 80Vdc (DC Class CC/UL, DC midget/IEC) ® Amps **Open fuse indication requires an open fuse to be in the CCP and the switch in the ON position. Accessories • 30A (UL) • Auxiliary contacts • 32A (IEC) • PLC wired remote fuse indication SCCR Shipping weight • 200kA (Class CC) • 10kA (midget UL) • 120kA (midget IEC max) Carton quantity • 20kA (DC Class CC/UL) • • 10kA (DC midget/IEC) 1-Pole DC CCP Poles • 4mm shank lock or Brady pin-out device part number 90850 Mounting Ratings • UL 94V0 Lockout/tagout provisions Specifications: • -20°C to 75°C* * For fuse performance under or above 25°C, consult fuse performance derating charts in the Bussmann Division publication titled Selecting Protective Devices (SPD), data sheet No. 3002. The revolutionary Bussmann series Compact Circuit Protector (CCP) fused disconnect switch is 2/3 the footprint of a traditional fusible switch and can provide up to a high 200kA SCCR that can help improve assembly SCCR. • Storage and operating temperature 1-, 2- and 3-pole versions Agency information • 2.84 lbs (1.29 kg) per carton 12 poles Features: • Extremely compact design at 17.5mm wide per pole • High Short-Circuit Current Ratings (SCCR) up to 200kA (UL) and 120kA (IEC) • CE • Disconnect rated to provide means for load isolation • RoHS compliant • Full voltage rated up to 600Vac or 80Vdc • For Class CC fuse versions • UL 98 Listed, File E302370, Guide WHTY • Class CC version is UL 98 Listed and horsepower rated, and suitable for branch circuit disconnect and branch circuit protection • IEC 10x38 version complies with IEC 60947-3 and suitable for branch circuit disconnect and branch circuit protection • Suitable for global installations, the units comply with UL, cULus, and IEC standards accepting UL Class CC, midget or IEC aM and gG/gL fuses • Open fuse indication: • • cULus to CSA Standard 22.2 No. 4-04, File 302370, Guide WHTY7 For UL midget and 10X38 IEC fuse versions • UL 508 Listed, File E320230, Guide NRNT • cULus Certified 22.2 No. 14-05 • IEC 60947-3 AC23A • IEC 60947-3 DC23A Conductors 75°C Cu or higher • Single/dual 18-6AWG solid or stranded • Single 4AWG solid or stranded Terminals • Single/dual conductor box lug or fork terminal suitable for line, load or accessory connection Torque • 18-10AWG 20 Lb-In • 8-4AWG 35 Lb-In 2 Eaton.com/bussmannseries • Local fuse indication lights are standard • Optional wired remote open fuse indication can be utilized to signal a PLC and open a contactor to de-energize all phases, if required • IP20 finger-safe with 10AWG (6mm2) or larger wire • Built-in switch interlock prohibits removing the fuse under load • Padlockable handle for lockout/tagout procedures recommend using Brady pin-out device part number 90850 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Technical Data 1157 Effective March 2016 Catalog numbers: Amp rating Fuse class Max horsepower rating (Vac) No. of poles Volts SCCR 30 CC 1 600Vac 200kA 0.5 — — 30 CC 2 600Vac 200kA — 2 30 CC 3 600Vac 200kA — 240Vac 10kA — UL 30 Midget 1 † 120 400Vac 120kA UL 30 Midget 240Vac 10kA 2 † — 400Vac 120kA 240Vac 10kA 3 32** 10x38 IEC UL 98 Listed, cULus 22.2, No. 4-04 — — CCP-2-30CC UL 98 Listed, cULus 22.2, No. 4-04 3 5 7.5 CCP-3-30CC UL 98 Listed, cULus 22.2, No. 4-04 — — — † UL 30 Midget † CCP-1-30CC 600 † 32** 10x38 IEC † Agency information — 480 † 32** 10x38 IEC † Catalog number 240 — — — † † — — — — 400Vac 120kA 30 CC 1 80Vdc† 20kA† — — — — UL 30 Midget 1 80Vdc† 10kA† — — — — † † Wire size/ (torque*) Single/ Dual 18-6AWG Sol/Str Single 4AWG Sol/Str Wire type CCP-1-30M IEC 60947-3, AC-23A 75°C Cu or higher Spade Terminal†† UL 508 Listed, cULus 22.2, No. 14-05 IEC 60947-3, AC-23A CCP-3-30M UL 508 Listed, cULus 22.2, No. 14-05 IEC 60947-3, AC-23A CCP-1-DCC UL 98 Listed, CSA 22.2, No. 4-04 UL 508 Listed, cULus 22.2, No. 14-05 IEC 60947-3, DC-23A 18-10AWG; 20 Lb-In, 8-4AWG; 35 Lb-In. 32A Class aM, 25A Class gG. SCCR May be lower, refer to installed fuse data sheets. Fork terminal with a 4.3mm gap for a #8-32 stud, 30A max, insulated flange, wire size 12-10AWG. Available Bussmann series fuses: Fuse class CCP-2-30M CCP-1-DCM 32** 10x38 IEC * ** † †† UL 508 Listed, cULus 22.2, No. 14-05 Type/description Volts Data sheet No. CC LP-CC time-delay, current limiting 600Vac/300Vdc 1023 CC FNQ-R time-delay 600Vac/300Vdc 1014 CC KTK-R fast-acting 600Vac 1015 M FNM time-delay 250Vac 2028 M FNQ time-delay 500Vac 1012 M KTK fast-acting 600Vac 1011 M BAF fast-acting 250Vac 2011 M KLM fast-acting 600Vac/dc 2020 gG/gL C10G 500V (400V@32A) 720115 aM 500V (400V@20@25A) 720115 C10M Open fuse indicating light Fuse access door Circuit marking area Fork terminal Box lug terminal Recommended lockout device: CCP version Class CC, midget, IEC 10x38 Switch handle (ganged on 2- and 3-pole versions) Lockout/ tagout provision Brady pin-out device P/N 90850 Dimensions – mm (in) Class CC, UL midget and I0x38 IEC 45 (1.8) 35 (1.4) 49.2 (1.9) 79.8 (3.1) 17.5 (0.7) 52.5 (2.1) 92.7 (3.7) Eaton.com/bussmannseries 3 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2016 Motor sizing table: LP-CC time-delay Class CC fuses Voltage 115Vac, 1-phase 230Vac, 1-phase 200Vac, 3-phase 208Vac, 3-phase 230Vac, 3-phase 460Vac, 3-phase 575Vac, 3-phase Motor size (Hp) 0.167 0.25 0.33 0.50 0.17 0.25 0.33 0.50 0.75 1 1.5 0.50 0.75 1 1.5 2 0.50 0.75 1 1.5 2 0.50 0.75 1 1.5 2 3 0.50 0.75 1 1.5 2 3.00 5.00 0.50 0.75 1 1.5 2 3.00 5.00 7.50 Motor FLA (amps) 4.4 5.8 7.2 9.8 2.2 2.9 3.6 4.9 6.9 8 10 2.5 3.7 4.8 6.9 7.8 2.4 3.5 4.6 6.6 7.5 2.2 3.2 4.2 6 6.8 9.6 1.1 1.6 2.1 3 3.4 4.8 7.6 0.9 1.3 1.7 2.4 2.7 3.9 6.1 9 Min (amps) 9 12 15 30 4.5 6 7 10 15 25 30 5 7.5 10 15 25 5 7 10 15 15 4.5 7 9 12 15 30 2.25 3.2 4.5 6 7 10 25 1.8 2.8 3.5 5 5.6 8 15 30 Code max (amps) 15 20 25 30 10 10 15 15 25 25 30 10 15 15 25 25 10 15 15 20 25 10 10 15 20 25 30 6 6 10 10 15 15 25 3 6 6 10 10 15 20 30 Heavy start (amps) 15 20 25 30 10 10 15 15 25 30 30 10 15 15 25 30 10 15 15 25 30 10 12 15 20 25 30 6 6.25 10 12 15 15 30 3.5 6 6.25 10 10 15 20 30 Note: NEMA motors only (no IEC or design B energy efficient). Minimum size if no more than 1 start/hour. Code max if low to moderate reverse/jog/plug applications. Heavy start permitted only if code max does not allow motor start-up. For high reverse/jog/plug applications or larger horsepower motors, Bussmann series Class CF (Class J electrical performance) fuses are recommended. See CCP_CF with CUBEFuse™. 4 Eaton.com/bussmannseries Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches 1-, 2- and 3-Pole — Class CF The revolutionary Bussmann series Compact Circuit Protector (CCP) fused disconnect switch with CUBEFuse™is 2/3 the footprint of a traditional fusible switch and provides a high 200kA SCCR that can help increase assembly SCCR. -20°C to 75°C*** *** For fuse performance under or above 25°C, consult fuse performance derating charts in the Bussmann Division publication titled Selecting Protective Devices (SPD) No. 3002. Flammability rating • UL 94V0 Lockout/tagout provisions • Specifications: Effective March 2016 Storage and operating temperature • Description: Technical Data 1157 4mm shank lock Mounting Ratings • Volts Local open fuse indication minimum voltage† • 600Vac • 125Vdc (up to 80A max) • Amps • • Auxiliary contacts PLC wired remote fuse indication Bussmann series CUBEFuse fuse pullers (P/Ns: CFP-30, CFP-60, CFP-100) • 200kA AC • • 100kA DC (up to 80A max) • Poles Shipping weight 1-, 2-, 3-pole • Agency information • UL 98 Listed, File E302370, Guide WHTY • cULus to CSA Standard 22.2 No. 4-04, File 302370, Guide WHTY7 • CE • RoHS compliant Conductors 75°C Cu or higher • 30 to 60A CCPs: - Single/dual 18-6AWG solid or stranded - Single 4AWG solid or stranded • 100A CCPs - Single 10-8AWG solid - Single 8-1AWG stranded - Dual 6AWG stranded Terminals • • Single/dual conductor box lug or fork terminal suitable for line, load or accessory connection Torque: 0-60A: 70-100A: - 18-10AWG 20 Lb-In 8-6AWG 35Lb-In 4AWG 35 Lb-In 18-10AWG single 25 Lb-In 8-1AWG single 40 Lb-In 6AWG dual 45 Lb-In • Uses finger-safe Class CF Bussmann series CUBEFuse with Class J performance • Bussmann series Low-Peak™ dual-element, time-delay* • Non-indicating 1-100A • Indicating 6-100A • Six (6) poles Features: • Uses Class CF finger-safe fast-acting and time-delay CUBEFuse with Class J electrical performance • Extremely compact design at 25.4mm (1 inch) wide per pole • Ampacity rejecting disconnects will not accept Bussmann series CUBEFuse amp ratings greater than switch rating • High Short-Circuit Current Ratings at 200kA • Disconnect rated to provide means for load isolation • Full voltage rated at 600Vac • 125Vdc rated up to 80A max • UL 98 Listed and suitable for branch circuit disconnect and branch circuit protection • 1-, 2- and 3-pole versions are horsepower rated • Complies with UL and CSA • Open fuse indication: • Local fuse indication lights are standard • Optional wired remote open fuse indication can be utilized to signal a PLC and open a contactor to de-energize all phases, if required • Additional open fuse indication can be provided by the Bussmann series CUBEFuse • IP20 finger-safe construction with 10AWG (6mm2) wire or larger • Built-in switch interlock capability prohibits removing the fuse under load • Padlockable handle for lockout/tagout procedures Fast-acting, non-indicating 1-100A** * See data sheet No. 9000. **See data sheet No. 2147. 2.03 lbs (0.92kg) per carton Carton quantity Fuses • 90V † Open fuse indication requires an open fuse to be in the CCP and the switch in the ON position. Accessories 30, 60, 100A SCCR • 35mm DIN-Rail Eaton.com/bussmannseries 5 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2016 Catalog numbers: UL Amp fuse rating class No. of poles Volts 30 CF 1 30 CF 2 30 CF 3 60 CF 1 60 CF 2 60 CF 3 100 CF 1 100 CF 2 CF 3 100 * ** † †† ††† Max horsepower rating (Vac)* SCCR 600Vac 200kA 125Vdc 100kA 600Vac 200kA 125Vdc 100kA 600Vac 200kA 600Vac 200kA 125Vdc†† 100kA 600Vac 200kA 125Vdc†† 100kA 600Vac 200kA 600Vac 200kA 240 480 600 1.5 — — — — 3 — — — 5 15 10 3 — — — Single 4AWG Sol/Str — 7.5 — — Spade Terminal† — 7.5 20 15 5 — — — — 10 — — — 20 50 40 125Vdc††† 100kA 600Vac 200kA 125Vdc 100kA 600Vac 200kA ††† Wire size/ torque** 120 Single/Dual 18-6AWG Sol/Str Dual 6AWG Str Spade Terminal† Catalog number Agency information CCP-1-30CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-2-30CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-3-30CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-1-60CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-2-60CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-3-60CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-1-100CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-2-100CF UL 98 Listed, cULus 22.2, No. 4-04 CCP-3-100CF UL 98 Listed, cULus 22.2, No. 4-04 With time-delay Bussmann series Low-Peak CUBEFuse. 30-60A: 18-10AWG 20 Lb-In, 8-6AWG 35 Lb-In, 4AWG 35 Lb-In, 70-100A: 18-10AWG Single 25 Lb-In, 8-1AWG Single 35 Lb-In, 6AWG Dual 45 Lb-In Fork terminal with a 4.3mm gap for a #8-32 stud, 30A max, insulated flange, wire size 12-10AWG. Up to 40A max. Up to 80A max. Fuse class CF 75°C Cu or higher Single 8-10AWG Sol/Str 8-1AWG Str Available Bussmann series fuses: CF Wire type Switch handle (ganged on 2- and 3-pole versions) Type/description Low-Peak time-delay, current limiting 600Vac/300Vdc Data sheet No. UPS/fast-acting 600Vac/dc 2147 9000 Open fuse indicating light Circuit marking area Fuse holder Fork terminal Lockout/ tagout provision Box lug terminal Dimensions – mm (in) 100A CUBEFuse CCP 30 and 60A CUBEFuse CCP 113.9 (4.5) 75.7 (3.0) 25.15 (1.0) 67.7 (2.7) 91.2 (3.6) 56.6 (2.2) 9.1 (0.4) 100.0 (3.9) 60A CUBEFuse 89.1 (3.5) 30A CUBEFuse 83.3 (3.3) 49.2 (1.9) 60.3 (2.4) 75.1 (3.0) 25.1 (1.0) 50.4 (2.0) 7.6 (0.3) 147.1 (5.8) 6 Eaton.com/bussmannseries 50.5 (2.0) 79.5 (3.0) Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Technical Data 1157 Effective March 2016 Motor sizing table: Bussmann series TCF Low-Peak™ time-delay Class CF fuses Voltage 115Vac, 1-phase 230Vac,1-phase 200Vac, 3-phase 208Vac, 3-phase Motor size (Hp) Motor FLA (amps) Optimal protection (amps) Code max (amps) Heavy start (amps) 10 0.5 2.2 6 6 6 15 15 0.75 3.2 6 6 6 15 15 15 1 4.2 10 10 10 15 Motor size (Hp) Motor FLA (amps) Optimal protection (amps) Code max (amps) Heavy start (amps) 0.167 4.4 10 10 0.25 5.8 10 0.333 7.2 Voltage 1.5 6 10 15 2 6.8 15 15 15 3 9.6 15 20 20 45 5 15.2 25 30 30 50 7.5 22 35 40 45 60 N/A 20** 54 90 100 N/A 100 N/A 0.5 1.1 3 3 3 1.6 3 3 3 0.5 9.8 15 20 20 0.75 13.8 25 25 30 1 16 25 30 35 1.5 20 30 35 2 24 40 45 3 34 50 5** 56 90 230Vac, 3-phase 0.167 2.2 6 6 6 0.75 0.25 2.9 6 6 6 1 2.1 6 6 6 0.333 3.6 6 10 10 1.5 3 6 6 6 0.5 4.9 10 10 10 2 3.4 6 6 6 3 4.8 10 10 10 5 7.6 15 15 15 7.5 11 17.5 20 20 0.75 6.9 15 15 15 1 8 15 15 17.5 1.5 10 15 20 20 2 12 20 25 25 10 14 25 25 30 21 35 40 45 460Vac, 3-phase 3 17 25 30 35 15 5 28 45 50 60 20 27 40 50 60 7.5 40 60 N/A N/A 50** 65 100 N/A N/A 10** 50 80 90 N/A 0.5 0.9 3 3 3 1.3 3 3 3 0.5 2.5 6 6 6 0.75 0.75 3.7 6 10 10 1 1.7 3 3 3 1 4.8 10 10 10 1.5 2.4 6 6 6 1.5 6.9 15 15 15 2 2.7 6 6 6 3 3.9 6 10 10 575Vac, 3-phase 2 7.8 15 15 17.5 3 11 17.5 20 20 5 6.1 10 15 15 5 17.5 30 35 35 7.5 9 15 20 20 7.5 25.3 40 45 50 10 11 17.5 20 20 20** 62.1 100 N/A N/A 40** 41 70 80 80 0.5 2.4 6 6 6 0.75 3.5 6 10 10 1 4.6 10 10 10 1.5 6.6 10 15 15 2 7.5 15 15 15 3 10.6 17.5 20 20 35 5 16.7 25 30 7.5 24.2 40 45 50 20** 59.4 90 N/A N/A Note: Use Code Max column for low to moderate reverse/jog/plug applications. *Heavy Start permitted only if Code Max does not allow motor start-up. Based on motor FLA from NEC® tables 430.248 and 430.250. Eaton.com/bussmannseries 7 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2016 Installed on a CCP-3-xx Auxiliary Contacts: Up to 60A CCP Description: 70 to 100A CCP NO+NC contact output to indicate the status of the switching mechanism on the CCP. Specifications: Rated ampacity • • 5A • Rated voltage • NC/NO contacts are closed/open when the CCP switch is in the “ON” position (closed) • Flammability Rating • • 240Vac UL 94V0 Dimensions – mm (in) Agency information • UL 98 File E155130, Guide WHTY2 • cULus to CSA Standard 22.2 No. 4-04 • IEC 60947-5-1 Up to 60A CCP 1.8 Wiring • 20-16AWG (0.5 to 1.5mm2) wire • Torque 5 Lb-In (0.68N•m) • For use with only 75°C Cu wire 2.6 Packaging • The CCP-AUX and CCP-AUX-100 are packaged individually • A single unit is capable of mounting to a 1-, 2-, or 3-pole CCP STRIP 33 NO 34 NO 41 NC 42 NC 1.9 Installation technique Mounts on the right side ONLY of the CCP, and mechanically interlocks with the CCP switch handle with hardware provided • .190 3.7 .3 IP20 rating 70 to 100A CCP Yes • 1.8 Environmental data Storage and operating temperature: -20°C to 75°C • Catalog numbers • 1-60A, CCP-AUX • 70-100A, CCP-AUX-100 Description Max per CCP Auxiliary Contacts 1 per CCP NO+NC for (1-, 2- or Switch Status 3-pole) up to 60A Auxiliary Contacts 1 per CCP NO+NC for (1-, 2- or Switch Status 3-pole) 70 to 100A Signal output Agency information 5A/240Vac UL 98 Recognized, cURus 22.2 No. 4-04, IEC 60947-51 AC-15 5A/240Vac UL 98 Recognized, CSA C22.2 No. 4-04 Catalog number Eaton.com/bussmannseries 33 NO STRIP 34 NO 2.2 42 NC 41 NC CCP-AUX .190 3.7 CCP-AUX-100 De-energize all circuits before installing or removing any CCP-AUX devices and follow all prescribed safety procedures. 8 2.9 .3 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches PLC fuse monitor: Description: Technical Data 1157 Effective March 2016 Installed on a CCP-3-xx Up to 60A CCP 70 to 100A CCP A resettable three-phase fuse monitor that integrates with the I/O card in a Programmable Logic Controller (PLC). Specifications: • Signal output to PLC: • +24Vdc, 10mA max • Output signals: • Digital 0Vdc (Low), 24Vdc max (High) • - 0Vdc Low – Fuse is good • - 24Vdc High – Fuse has opened When the fuse opens, the output signal is sent high and will remain high until the unit is reset. Storage and operating temperature • PLC programming • Agency information • UL 98 File E155130, Guide WHTY2 • cULus to CSA Standard 22.2 No. 4-04 Rated impulse voltage • 8kV Local indication • Two distinct LEDs indicate unit power (green) and open fuse (red). Open fuse LED is resettable upon the replacement of the fuse and the actuation of the reset switch Flammability rating • UL 94V0 Wiring • For power, signal and ground connections use shielded twisted pair 22-24AWG (0.34-0.25mm2) 300V rated wire Packaging • The CCP-PLC-IND is packaged individually • A single unit monitors up to three phases. Package includes 0.110” (2.8mm) quick connects for power, signal and ground connections Minimum circuit voltage • -20°C to 75°C The CCP-PLC-IND signal line is designed to provide a digital input to a PLC I/O card. In this case, a Programmable Logic Control program must be written to properly interpret the input signal to the PLC. The PLC program should check for consecutive high signals before taking action on a critical process. Catalog numbers • 1-60A, CCP-PLC-IND • 70-100A, CCP-PLC-100 Description Wired remote fuse indication for PLC applications up to 60A Wired remote fuse indication for PLC applications 70 to 100A Max per CCP Signal output to PLC Min. circuit Volts Agency information Catalog number CCP-PLC-IND 1 per CCP (1, 2- or 3-pole) 24Vdc/ 10mA 100Vac UL 98 Recognized, cURus 22.2 No. 4-04 CCP-PLC-100 De-energize all circuits before installing or removing any CCP-PLC-IND devices and follow all prescribed safety procedures. Minimum circuit voltage required across the CCP is 100Vac/dc for the remote indication device to operate Installation technique • Mounts on the left side ONLY of the CCP and mechanically interlocks with the CCP switch handle with hardware provided IP20 Rating • Yes Eaton.com/bussmannseries 9 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2016 PLC wiring schematic: PLC PLCpower Power supply Supply CCP-PLC-IND CCP-PLC-100 Circuit monitoring leads from CCP-PLC-IND to CCP (100Vac – 600Vac) +24Vdc +24Vdc 0Vdc/Gnd 0Vdc/Gnd Signal Output 10mA max. The CCP-PLC-IND and CCP-PLC-100 need to be powered by the same +24Vdc and ground (0Vdc/Gnd return) terminals that are feeding the PLC input card. If it is not, it may signal improperly. +24Vdc 0Vdc/Gnd PLC Input Card If feeding multiple CCP-PLC-INDs or CCP-PLC-100s from different power supplies, there must be multiple input cards being powered by those same power supplies as well. Connection from CCP-PLC-IND to CCP Connect leads from CCP-PLC-IND to the terminals as shown. There is a dedicated terminal on the CCP to accept the spade connectors from the CCP-PLC-IND. NOTE: When monitoring a 1-or 2-pole CCP, trim unused leads. 10 Connections for CCP-PLC-IND from a CCP-3-XX to a remote monitoring device Eaton.com/bussmannseries Circuit monitoring leads from PLC or remote monitoring device. Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Technical Data 1157 Effective March 2016 Dimensions – mm (in) Up to 60A CCP SIG GND +24vDC +24vDC RESET 1.9 6T 5L 3 3 2.6 4T 3L 2 2 2T 1L 1 1 STATUS ON 1.8 .3 3.7 70 to 100A CCP 2 4T 2.2 3 6T 3 5L 2.9 3L 2 2T 1L 1 SIG GND +24vDC +24vDC RESET STATUS 1 ON 2.0 .3 3.7 Eaton.com/bussmannseries 11 Technical Data 1157 Compact Circuit Protector (CCP) UL Class CC, CF (CUBEFuse), midget and IEC 10x38mm fused disconnect switches Effective March 2016 The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Bussmann Division 114 Old State Road Ellisville, MO 63021 United States Eaton.com/bussmannseries © 2016 Eaton All Rights Reserved Printed in USA Publication No. 1157 – BU-SB15192 March 2016 For Eaton’s Bussmann series product information, call 1-855-287-7626 or visit: Eaton.com/bussmannseries Eaton, Bussmann, CUBEFuse and Low-Peak are valuable trademarks of Eaton in the US and other countries. You are not permitted to use the Eaton trademarks without prior written consent of Eaton. CSA is a registered trademark of the Canadian Standards Group UL is a registered trademark of the Underwriters Laboratories, Inc. Follow us on social media to get the latest product and support information.